BK/HPC-D Equivalent & Substitute Parts

Part Overview

The BK/HPC-D is a cartridge fuse holder manufactured by Eaton - Bussmann Electrical Division, rated for 30 A at 600V with panel mount configuration. This component is designed for single-circuit applications using 5AG midget fuses (10mm x 38mm). The product maintains active status in the market. Substitute parts are identified based on matching electrical ratings, mechanical dimensions, fuse compatibility, and circuit configuration to ensure direct functional equivalence in panel-mounted applications.

Substiute Parts

BK/HPC-D

Eaton - Bussmann Electrical DivisionIn Stock: 866BK/HPC-D Datasheet

Current PartRFQ

05710007LXP

Littelfuse Inc.In Stock: 95705710007LXP Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BK/HPC-D is determined by the following criteria:

• Current rating of 30 A
• Voltage rating of 600V
• Fuse size of 0.394" Dia x 1.496" L (10mm x 38mm)
• Cartridge fuse type
• Single-circuit configuration
• Panel mount orientation
• Compatibility with 5AG midget fuse series

The substitute part 05710007LXP (Littelfuse Inc., Series 571) meets all these electrical and mechanical parameters, establishing functional equivalence for direct replacement in panel-mounted fuse holder applications.

Parameter Comparison

Engineering Selection Recommendations

Both the BK/HPC-D and 05710007LXP are active products meeting the core electrical and mechanical requirements for 30 A, 600V cartridge fuse holder applications. The 05710007LXP offers ROHS3 compliance, which may be required for applications subject to RoHS regulations. The primary difference lies in termination style: the BK/HPC-D uses solder lug termination, while the 05710007LXP employs quick connect 0.250" (6.3mm) termination. Selection between these parts depends on the specific circuit board or panel design requirements and applicable compliance mandates.

Frequently Asked Questions (FAQ)

Q: Can the 05710007LXP directly replace the BK/HPC-D in existing designs?

A: Both parts share identical electrical ratings (30 A, 600V), fuse size (10mm x 38mm), and circuit configuration. However, termination style differs: BK/HPC-D uses solder lug while 05710007LXP uses quick connect 0.250" (6.3mm). Compatibility depends on the existing circuit board or panel connection method.

Q: What fuse types are compatible with these holders?

A: Both holders accept 5AG midget cartridge fuses with dimensions 13/32" x 1-1/2" (10mm x 38mm).

Q: Are there compliance differences between these parts?

A: The BK/HPC-D is RoHS non-compliant, while the 05710007LXP is ROHS3 compliant. Applications requiring RoHS certification must use the 05710007LXP.

Q: What is the difference in termination between these parts?

A: The BK/HPC-D terminates via solder lug for direct PCB soldering. The 05710007LXP uses quick connect 0.250" (6.3mm) terminals for push-on connection to panel wiring.