BK/AGC-SV-2 Equivalent & Substitute Parts

Part Overview

The BK/AGC-SV-2 is a 2 A, 250 V AC/DC fast-blow glass cartridge fuse manufactured by Eaton - Electronics Division. This through-hole component is designed for circuit protection in applications requiring fast response characteristics. The part maintains active product status with 747 units in current inventory stock.

Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when packaging requirements differ. All substitutes maintain identical electrical and mechanical specifications within the AGC series.

Substiute Parts

BK/AGC-SV-2

Eaton - Electronics DivisionIn Stock: 826BK/AGC-SV-2 Datasheet

Current PartRFQ

BK/AGC-V-2-R

Eaton - Electronics DivisionIn Stock: 915BK/AGC-V-2-R Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution within the AGC series is determined by strict equivalence across the following critical parameters:

• Current Rating: 2 A
• Voltage Rating (AC): 250 V
• Fuse Type: Cartridge, Glass
• Response Time: Fast Blow
• Package / Case: 3AB, 3AG, 1/4" x 1-1/4" (Axial)
• Mounting Type: Through Hole
• Breaking Capacity @ Rated Voltage: 100 A
• Melting I²t: 17.52
• Operating Temperature Range: -55°C ~ 125°C
• Size / Dimension: 0.266" Dia x 1.292" L (6.76mm x 32.82mm)
• DC Cold Resistance: 0.063 Ohms
• Approval Agency: CSA, UL

The substitute part BK/AGC-V-2-R maintains complete electrical and mechanical equivalence to the primary part number BK/AGC-SV-2. The difference between these part numbers reflects packaging configuration only.

Parameter Comparison

Engineering Selection Recommendations

Both BK/AGC-SV-2 and BK/AGC-V-2-R are active products from Eaton - Electronics Division with identical electrical and mechanical specifications. Selection between these part numbers is determined by packaging and compliance requirements:

BK/AGC-SV-2 is appropriate for applications where standard packaging is specified and RoHS non-compliant components are acceptable.

BK/AGC-V-2-R is appropriate for applications requiring RoHS compliance or bulk packaging configurations. This part number carries RoHS Compliant status and is available in bulk packaging.

Both parts carry CSA and UL approval certifications and are suitable for circuit protection applications operating within the specified temperature range of -55°C to 125°C.

Frequently Asked Questions (FAQ)

Q: Are BK/AGC-SV-2 and BK/AGC-V-2-R electrically identical?

A: Yes. Both parts have identical current rating (2 A), voltage rating (250 V AC), response time (Fast Blow), breaking capacity (100 A), melting I²t (17.52), and DC cold resistance (0.063 Ohms).

Q: What is the difference between these two part numbers?

A: The primary differences are packaging configuration and RoHS compliance status. BK/AGC-SV-2 uses standard packaging and is RoHS non-compliant. BK/AGC-V-2-R uses bulk packaging and is RoHS Compliant.

Q: Can BK/AGC-V-2-R be used as a direct replacement for BK/AGC-SV-2?

A: Yes, for applications where RoHS compliance is not a constraint. Both parts are mechanically and electrically equivalent with identical through-hole mounting specifications and 3AB, 3AG package dimensions.

Q: Are both parts approved by the same certification agencies?

A: Yes. Both BK/AGC-SV-2 and BK/AGC-V-2-R carry CSA and UL approval certifications.

Q: What is the physical size of these fuses?

A: Both parts have identical dimensions: 0.266" diameter x 1.292" length (6.76mm x 32.82mm).

Q: What is the operating temperature range for these components?

A: Both parts operate within the range of -55°C to 125°C.