BH5P-VH-1 Equivalent & Substitute Parts

Part Overview

The BH5P-VH-1 is a rectangular connector header manufactured by JST Sales America Inc., designed for through-hole board-to-cable/wire applications. This shrouded 5-position header operates at 0.156" (3.96mm) pitch and is rated for 250V operation across -25°C to 85°C. The part maintains Active product status with full RoHS3 compliance and UL94 V-0 flammability rating. Substitute parts are identified to provide alternative sourcing options when primary inventory is constrained or when application requirements permit receptacle housing configurations.

Substiute Parts

BH5P-VH-1

JST Sales America Inc.In Stock: 966BH5P-VH-1 Datasheet

Current PartRFQ

VHR-5N

JST Sales America Inc.In Stock: 42648VHR-5N Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The VHR-5N is identified as a substitute part within the JST VH series connector family. Substitution logic is based on the following alignment criteria:

• Same manufacturer (JST Sales America Inc.)
• Same series designation (VH)
• Identical pitch specification (0.156" / 3.96mm)
• Identical position count (5 positions)
• Identical row configuration (1 row)
• Compatible operating temperature range (-25°C ~ 85°C)
• Matching RoHS compliance status

The VHR-5N functions as a receptacle housing component, whereas the BH5P-VH-1 is a header. These parts are complementary within the VH connector ecosystem and share mechanical and electrical compatibility parameters that permit substitution in applications where receptacle housings are functionally acceptable.

Parameter Comparison

Engineering Selection Recommendations

Both BH5P-VH-1 and VHR-5N maintain Active product status with current manufacturer support. The BH5P-VH-1 carries RoHS3 compliance with UL94 V-0 flammability certification. The VHR-5N carries RoHS compliance designation. Selection between these parts depends on application-specific connector topology requirements: the BH5P-VH-1 header is suitable for through-hole PCB mounting with male pin contact configuration, while the VHR-5N receptacle housing accommodates free-hanging in-line applications with female socket contact configuration. Both parts operate within identical temperature and voltage parameters, ensuring electrical compatibility within the specified operating envelope.

Frequently Asked Questions (FAQ)

Q: Can VHR-5N directly replace BH5P-VH-1 in all applications?

A: No. The VHR-5N is a receptacle housing with female sockets, while BH5P-VH-1 is a header with male pins. Direct substitution is only possible in applications where the connector topology (receptacle vs. header) is interchangeable with the mating connector design.

Q: What are the critical parameters for substitution within the VH series?

A: Pitch (0.156" / 3.96mm), position count (5), row configuration (1), and operating temperature range (-25°C ~ 85°C) are the primary parameters determining substitution eligibility. Both parts meet these criteria.

Q: Are there compliance differences between BH5P-VH-1 and VHR-5N?

A: BH5P-VH-1 is RoHS3 Compliant with UL94 V-0 rating. VHR-5N is RoHS Compliant. Both carry MSL 1 (Unlimited) moisture sensitivity classification. Verify compliance requirements for your specific application before selection.

Q: Does VHR-5N include contacts?

A: No. The VHR-5N receptacle housing is supplied without contacts. Contacts must be procured separately and crimped into the housing.

Q: What is the mated stacking height for BH5P-VH-1?

A: The mated stacking height is 21.30mm. This specification applies to the assembled connector pair and should be considered in PCB layout and enclosure design.