BFV14-6C Equivalent & Substitute Parts

Part Overview

The BFV14-6C is a blue insulated spade terminal connector manufactured by 3M, designed for crimp termination of 14-16 AWG wire onto a 6 stud. This component is part of the Highland™ series and is classified as obsolete. Due to its obsolete status, identifying equivalent substitute parts is essential for ongoing maintenance, repair, and new design implementations where this connector type is required.

Substiute Parts

BFV14-6C

3MIn Stock: 1197BFV14-6C Datasheet

Current PartRFQ

PV14-8F-C

Panduit CorpIn Stock: 24859PV14-8F-C Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The PV14-8F-C from Panduit Corp is identified as a manufacturer-recommended substitute for the BFV14-6C. The substitution is based on the following alignment of critical parameters:

• Wire gauge compatibility: Both parts accommodate 14-16 AWG wire
• Termination method: Both use crimp termination
• Insulation specification: Both feature vinyl insulation with 0.170" (4.32mm) diameter
• Contact material and finish: Both use tin-finished copper contacts
• Color coding: Both are blue for consistent circuit identification
• Mounting configuration: Both are free-hanging, in-line connectors

The primary difference is the stud size: the substitute uses an 8 stud versus the original 6 stud. This change requires verification that the receiving component (the stud or terminal post) can accommodate the larger 8 stud diameter.

Parameter Comparison

Engineering Selection Recommendations

The PV14-8F-C is the manufacturer-recommended substitute for the obsolete BFV14-6C. Selection of this substitute is supported by:

• Active product status: The PV14-8F-C is currently in production and widely available (24,796 pcs in stock), ensuring long-term supply continuity
• Regulatory compliance: Both parts share identical REACH and ECCN classifications, maintaining compliance requirements
• RoHS3 compliance: The substitute meets RoHS3 standards, aligning with modern environmental regulations
• Functional equivalence: Wire gauge, termination method, insulation specifications, and contact materials are identical

The primary consideration for substitution is the stud size increase from 6 to 8. This change requires confirmation that the receiving component's stud hole or terminal post can physically accommodate the larger diameter without compromising mechanical fit or electrical performance.

Frequently Asked Questions (FAQ)

Q: Why is the BFV14-6C obsolete and what does this mean for my application?

A: The BFV14-6C is classified as obsolete by the manufacturer, indicating it is no longer in active production. For new designs, repairs, or maintenance requiring this connector type, the PV14-8F-C substitute ensures continued availability and compliance with current standards.

Q: Can I directly replace BFV14-6C with PV14-8F-C without any modifications?

A: Direct replacement depends on the receiving component. The critical difference is the stud size: 6 stud versus 8 stud. If the terminal post or stud hole is sized for a 6 stud, the larger 8 stud may not fit. Physical verification of the receiving component is required before substitution.

Q: Are the electrical characteristics identical between these two parts?

A: Yes. Both parts use identical wire gauge (14-16 AWG), tin-finished copper contacts, and crimp termination. Electrical performance for the specified wire gauge range is equivalent.

Q: What are the dimensional differences I should be aware of?

A: The PV14-8F-C is slightly larger overall: 0.900" length versus 0.850", and 0.310" width versus 0.250". These dimensional increases are proportional to the larger stud size and should be considered in space-constrained applications.

Q: Are there any compliance or certification differences?

A: Both parts are REACH Unaffected and classified as EAR99. The PV14-8F-C additionally carries RoHS3 compliance, which is advantageous for modern applications subject to environmental regulations.

Q: What is the difference between the seam types (Butted vs. Brazed)?

A: The BFV14-6C features a butted seam, while the PV14-8F-C uses a brazed seam. Brazed seams provide enhanced mechanical strength and durability, representing an improvement in the substitute design.