BFR 360F E6765 Equivalent & Substitute Parts

Part Overview

The BFR 360F E6765 is an RF transistor manufactured by Infineon Technologies, classified as an NPN bipolar junction transistor (BJT) designed for high-frequency applications. This device operates at frequencies up to 14GHz with a maximum collector-emitter breakdown voltage of 9V and maximum power dissipation of 210mW in a surface mount PG-TSFP-3-1 package.

The BFR 360F E6765 is designated as obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this RF transistor.

Substiute Parts

BFR 360F E6765

Infineon TechnologiesIn Stock: 1085BFR 360F E6765 Datasheet

Current PartRFQ

2SC2714-Y(TE85L,F)

Toshiba Semiconductor and StorageIn Stock: 42042SC2714-Y(TE85L,F) Datasheet

MFR RecommendedRFQ

2SC4774T106S

Rohm SemiconductorIn Stock: 66292SC4774T106S Datasheet

MFR RecommendedRFQ

CPH6001A-TL-E

onsemiIn Stock: 17326CPH6001A-TL-E Datasheet

MFR RecommendedRFQ

NSVF3007SG3T1G

onsemiIn Stock: 959NSVF3007SG3T1G Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BFR 360F E6765 is determined by the following critical parameters:

Primary Substitution Criteria:

• Transistor Type: NPN configuration required
• Voltage Rating: Collector-emitter breakdown voltage must equal or exceed 9V
• Frequency Capability: Transition frequency must support 14GHz operation or higher
• Power Dissipation: Maximum power rating must accommodate 210mW or greater
• Current Handling: Maximum collector current must support 35mA or higher
• Mounting Type: Surface mount configuration required
• Package Compatibility: Physical dimensions and pin configuration must be compatible with circuit board layout

Secondary Compatibility Factors:

• Operating temperature range must include 150°C maximum junction temperature
• Noise figure and gain characteristics should align with RF application requirements
• Moisture sensitivity level and compliance certifications (RoHS, REACH) should match or exceed original specifications

The substitute parts listed below meet these criteria within the constraints of available component specifications.

Parameter Comparison

Engineering Selection Recommendations

CPH6001A-TL-E (onsemi)

The CPH6001A-TL-E is the primary recommended substitute for the BFR 360F E6765. This device is in active product status, ensuring long-term availability and supply chain stability. The CPH6001A-TL-E operates at 6.7GHz transition frequency, which is lower than the original 14GHz specification but remains suitable for many RF applications. The device provides superior power dissipation capability (800mW versus 210mW), higher maximum collector current (100mA versus 35mA), and higher voltage rating (12V versus 9V). The CPH6001A-TL-E is ROHS3 compliant and carries MSL 1 rating. Package differences (SOT-23-6 Thin versus SOT-723) require circuit board layout verification.

NSVF3007SG3T1G (onsemi)

The NSVF3007SG3T1G provides an alternative substitute with 8GHz transition frequency, closer to the original 14GHz specification. This device is designated as obsolete but carries automotive-grade qualification (AEC-Q101) and extended operating temperature range (-55°C to 150°C). The NSVF3007SG3T1G offers 350mW power dissipation and 30mA maximum collector current. ROHS3 compliance and MSL 1 rating are confirmed. Package configuration (SC-70FL/MCPH3) differs from the original and requires layout compatibility assessment.

2SC4774T106S (Rohm Semiconductor)

The 2SC4774T106S is designated as "Not For New Designs" and is not recommended for new applications. This device exhibits lower voltage rating (6V versus 9V) and lower transition frequency (800MHz versus 14GHz), making it unsuitable for high-frequency RF applications matching the original specification.

2SC2714-Y(TE85L,F) (Toshiba Semiconductor)

The 2SC2714-Y(TE85L,F) is in active product status but exhibits significant parameter deviations. The transition frequency (550MHz) is substantially lower than the original 14GHz requirement. Maximum collector current (20mA) is below the original 35mA specification. Maximum power dissipation (100mW) is insufficient for the original 210mW requirement. This device is not suitable as a direct substitute for high-frequency RF applications.

Frequently Asked Questions (FAQ)

Q: Can the CPH6001A-TL-E directly replace the BFR 360F E6765 without circuit modifications?

A: The CPH6001A-TL-E is electrically compatible as an NPN RF transistor with superior electrical ratings. However, package differences (SOT-23-6 Thin versus SOT-723) require verification of circuit board layout compatibility, including pin spacing, trace routing, and thermal management provisions. Bias network adjustments may be necessary due to differences in DC current gain characteristics.

Q: Why is the 2SC2714-Y(TE85L,F) listed as a substitute if it operates at only 550MHz?

A: The 2SC2714-Y(TE85L,F) is included in the substitute list based on the original manufacturer's documentation. However, the 550MHz transition frequency is substantially below the 14GHz requirement of the BFR 360F E6765. This device is not recommended for applications requiring the full 14GHz frequency capability of the original part.

Q: What are the key differences between the CPH6001A-TL-E and NSVF3007SG3T1G?

A: The CPH6001A-TL-E is in active product status with higher power dissipation (800mW), higher maximum collector current (100mA), and higher voltage rating (12V). The NSVF3007SG3T1G is obsolete but offers higher transition frequency (8GHz versus 6.7GHz) and automotive-grade qualification. The CPH6001A-TL-E is preferred for general RF applications; the NSVF3007SG3T1G is suitable for automotive applications requiring extended temperature range.

Q: Are all substitute parts ROHS3 compliant?

A: All substitute parts listed carry ROHS3 compliance certification. The original BFR 360F E6765 does not specify RoHS status in the provided documentation.

Q: What is the significance of MSL 1 (Unlimited) rating?

A: MSL 1 (Unlimited) indicates that the component has unlimited shelf life and does not require special moisture control during storage or handling. All parts listed, including the original BFR 360F E6765, carry this rating.

Q: Can the NSVF3007SG3T1G be used in non-automotive applications?

A: Yes. The NSVF3007SG3T1G automotive-grade qualification (AEC-Q101) and extended temperature range (-55°C to 150°C) make it suitable for both automotive and general industrial RF applications. The extended temperature range provides additional design margin for high-reliability applications.

Q: What package considerations are critical for substitution?

A: The original BFR 360F E6765 uses SOT-723 packaging. Substitute parts use different packages: CPH6001A-TL-E (SOT-23-6 Thin), NSVF3007SG3T1G (SC-70FL/MCPH3), 2SC4774T106S (SC-70, SOT-323), and 2SC2714-Y(TE85L,F) (TO-236-3, SC-59, SOT-23-3). Physical dimensions, pin spacing, and thermal characteristics differ. Circuit board layout must be verified for each substitute to ensure proper fit and thermal performance.

Q: Is the BFR 360F E6765 still available despite obsolete status?

A: According to the provided inventory data, 1034 pieces of BFR 360F E6765 are available as new original stock. However, obsolete status indicates that the manufacturer has discontinued production. Current inventory represents remaining stock; long-term availability cannot be guaranteed.