BFC246716683 Film Capacitor Equivalent & Substitute Parts

Part Overview

The BFC246716683 is a 0.068 µF film capacitor manufactured by Vishay Beyschlag/Draloric/BC Components, designed for general-purpose applications requiring polyester metallized dielectric construction. This radial through-hole component operates across a temperature range of -55°C to 105°C and is rated for 250V DC / 160V AC operation. The part is currently active in production with 714 units in stock. Substitute parts are identified when electrical specifications, mechanical compatibility, and regulatory compliance align with the original component's parameters.

Substiute Parts

BFC246716683

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 807BFC246716683 Datasheet

Current PartRFQ

160683K250C-F

Cornell Dubilier Electronics (CDE)In Stock: 836160683K250C-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BFC246716683 is determined by strict alignment of the following parameters:

• Capacitance value: 0.068 µF (exact match required)
• Tolerance: ±10% (exact match required)
• Voltage ratings: 250V DC minimum and 160V AC minimum
• Dielectric material: Polyester, Metallized (exact match required)
• Operating temperature range: -55°C to 105°C minimum (exact match required)
• Mounting type: Through Hole (exact match required)
• Package configuration: Radial (exact match required)
• Lead spacing: 0.394" (10.00mm) (exact match required)
• Termination style: PC Pins (exact match required)
• Regulatory compliance: ROHS3 Compliant and REACH Unaffected status

The substitute part 160683K250C-F manufactured by Cornell Dubilier Electronics (CDE) meets all electrical and mechanical parameters specified above, making it a direct equivalent for circuit applications requiring the BFC246716683.

Parameter Comparison

Engineering Selection Recommendations

Both the BFC246716683 and 160683K250C-F are active production components with identical electrical specifications and regulatory compliance status. Selection between these parts should be based on:

• Physical space constraints within the circuit board layout, as the CDE substitute exhibits different dimensional characteristics while maintaining identical lead spacing and termination compatibility
• Inventory availability and supply chain considerations
• Manufacturer preference or qualification requirements within the design documentation

Both components satisfy ROHS3 compliance and REACH unaffected status requirements for regulated applications.

Frequently Asked Questions (FAQ)

Q: Can the 160683K250C-F replace the BFC246716683 in existing circuit designs?

A: Yes. Both components share identical electrical parameters (0.068 µF, ±10% tolerance, 250V DC / 160V AC rating), dielectric material composition, operating temperature range, and lead spacing (0.394" / 10.00mm). The radial through-hole mounting configuration and PC pin termination are identical, ensuring direct PCB compatibility.

Q: What are the physical differences between these parts?

A: The BFC246716683 measures 0.492" L × 0.161" W with a maximum seated height of 0.555". The 160683K250C-F measures 0.512" L × 0.157" W with a maximum seated height of 0.374". These dimensional variations do not affect electrical function but may impact board layout in space-constrained applications.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both the BFC246716683 and 160683K250C-F are ROHS3 compliant and REACH unaffected, meeting current environmental and hazardous substance restrictions for electronic components.

Q: What determines substitution eligibility for this capacitor?

A: Substitution is determined by matching capacitance value, tolerance, voltage ratings (both AC and DC), dielectric material type, operating temperature range, mounting configuration, package style, lead spacing, and termination type. All these parameters must align exactly between the original and substitute part.

Q: Can I use a substitute part with different lead spacing?

A: No. Lead spacing of 0.394" (10.00mm) is a critical mechanical parameter for PCB compatibility. Substitute parts must maintain this exact spacing to ensure proper board mounting without design modifications.