BFC237534223 Equivalent & Substitute Parts

Part Overview

The BFC237534223 is a 0.022 µF film capacitor rated for 1600V DC with polypropylene dielectric material and metallized construction. This radial through-hole component is designed for high-pulse and DV/DT applications. The part is currently active in production with ROHS3 compliance and maintains 801 units in stock. Equivalent parts are identified when all critical electrical and mechanical parameters match within specified tolerances, enabling direct substitution in circuit designs without performance degradation.

Substiute Parts

BFC237534223

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 824BFC237534223 Datasheet

Current PartRFQ

BFC237530223

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 2587BFC237530223 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BFC237534223 is determined by strict equivalence across all critical parameters. The substitute part BFC237530223 qualifies as a direct equivalent based on matching specifications in the following categories:

Electrical Parameters: Identical capacitance value (0.022 µF), tolerance (±5%), DC voltage rating (1600V), and AC voltage rating (500V).

Dielectric & Construction: Identical polypropylene metallized film composition and high-pulse/DV/DT application suitability.

Mechanical & Mounting: Matching radial through-hole configuration, lead spacing (10.00mm), PC pin termination, and physical dimensions (30.00mm L x 9.50mm W x 22.50mm H seated).

Environmental & Compliance: Identical operating temperature range (-55°C ~ 105°C), ROHS3 compliance, and REACH unaffected status.

Series Classification: Both parts belong to the KP/MKP 375 series, confirming design family equivalence.

Parameter Comparison

Engineering Selection Recommendations

The BFC237530223 is a direct parametric equivalent to the BFC237534223 and qualifies for substitution in all applications. Both parts are manufactured by Vishay Beyschlag/Draloric/BC Components within the same KP/MKP 375 series and maintain identical electrical, mechanical, and environmental specifications.

Selection between these parts should be based on availability and procurement requirements. The BFC237530223 offers higher inventory availability (2561 units versus 801 units), making it the preferred choice for applications requiring immediate fulfillment or bulk quantities. Both parts maintain active production status and full ROHS3 compliance, ensuring long-term supply chain stability and regulatory conformance.

No performance differences exist between these parts when applied to high-pulse and DV/DT circuit applications within the specified operating temperature range of -55°C to 105°C.

Frequently Asked Questions (FAQ)

Q: Can BFC237530223 be used as a direct replacement for BFC237534223?

A: Yes. Both parts are identical in all critical parameters including capacitance, voltage ratings, dielectric material, physical dimensions, lead spacing, and termination type. Direct substitution is supported without circuit modification.

Q: Are there any differences in electrical performance between these parts?

A: No. Both parts share identical capacitance (0.022 µF), tolerance (±5%), DC voltage rating (1600V), AC voltage rating (500V), and operating temperature range (-55°C ~ 105°C). Electrical performance is equivalent.

Q: Do both parts fit the same PCB footprint?

A: Yes. Both parts have identical radial through-hole configuration with 10.00mm lead spacing, 30.00mm length, 9.50mm width, and 22.50mm seated height. PCB layout compatibility is confirmed.

Q: What is the difference in availability between these parts?

A: BFC237534223 has 801 units in stock, while BFC237530223 has 2561 units available. The substitute part offers significantly higher inventory availability for procurement planning.

Q: Are both parts compliant with current regulatory standards?

A: Yes. Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and distribution.

Q: Can these parts be used interchangeably in high-pulse and DV/DT applications?

A: Yes. Both parts are rated for high-pulse and DV/DT applications and maintain identical specifications for these use cases. Application performance is equivalent.