BFC237019104 Equivalent & Substitute Parts

Part Overview

The BFC237019104 is a 0.1 µF film capacitor manufactured by Vishay Beyschlag/Draloric/BC Components, designed for through-hole radial mounting applications. This polyester metallized capacitor operates across a temperature range of -55°C to 100°C with a 63V DC voltage rating and ±5% tolerance. The component is actively produced, ROHS3 compliant, and rated for automotive applications under AEC-Q200 standards. Substitute parts are identified to address packaging availability and inventory considerations while maintaining identical electrical and mechanical specifications.

Substiute Parts

BFC237019104

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 1108BFC237019104 Datasheet

Current PartRFQ

BFC237076104

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 7735BFC237076104 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of BFC237019104 with BFC237076104 is based on strict electrical and mechanical parameter equivalence. Both components share identical specifications across all critical parameters: capacitance value (0.1 µF), tolerance (±5%), voltage ratings (40V AC / 63V DC), dielectric material (polyester metallized), operating temperature range (-55°C to 100°C), mounting configuration (through-hole radial), physical dimensions (0.283" L x 0.098" W), lead spacing (0.200"), and termination type (PC pins). Both are manufactured within the same MKT370 series by Vishay Beyschlag/Draloric/BC Components and maintain identical compliance certifications (ROHS3, AEC-Q200). The only distinction between these parts is packaging format: BFC237019104 is supplied in Tape & Reel (TR) configuration, while BFC237076104 is supplied in Cut Tape (CT) configuration. This packaging difference does not affect electrical performance or mechanical compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both BFC237019104 and BFC237076104 are qualified for direct substitution in automotive applications requiring AEC-Q200 compliance. Selection between these parts should be based on procurement and assembly requirements. BFC237019104 in Tape & Reel packaging is suitable for high-volume automated assembly processes. BFC237076104 in Cut Tape packaging accommodates lower-volume production runs or manual assembly workflows. Both components maintain active product status and full ROHS3 compliance, ensuring long-term availability and regulatory conformance. No electrical performance variation exists between these parts; circuit behavior and reliability characteristics remain identical.

Frequently Asked Questions (FAQ)

Q: Can BFC237076104 be used as a direct replacement for BFC237019104 in production? A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). Direct substitution is valid for all circuit applications.

Q: Does packaging format affect component performance or reliability? A: No. Packaging format (Tape & Reel or Cut Tape) is a supply and handling specification only. It does not influence electrical characteristics, voltage rating, capacitance value, temperature performance, or long-term reliability.

Q: Are both parts suitable for automotive applications? A: Yes. Both BFC237019104 and BFC237076104 carry AEC-Q200 automotive qualification and are approved for automotive circuit use.

Q: What is the lead spacing for these radial capacitors? A: The lead spacing is 0.200" (5.08mm) for both parts, ensuring identical PCB footprint compatibility.

Q: Do these capacitors require any special handling or storage conditions? A: Both components are ROHS3 compliant with Moisture Sensitivity Level (MSL) listed as Not Applicable, indicating standard handling and storage procedures are sufficient.

Q: Can these parts be used interchangeably in existing designs without PCB modification? A: Yes. Identical physical dimensions, lead spacing, and radial mounting configuration ensure direct PCB compatibility without design changes.