BFC233629082 Equivalent & Substitute Parts

Part Overview

The BFC233629082 is a 0.033 µF film capacitor manufactured by Vishay Beyschlag/Draloric/BC Components, part of the MKP336 2 series. This radial polypropylene metallized capacitor is rated for 630V DC operation and is designed for EMI and RFI suppression applications. The part maintains Active product status with 714 units currently in stock. Alternative equivalent parts may be required due to inventory constraints, supply chain considerations, or specific application requirements where parametric compatibility is maintained.

Substiute Parts

BFC233629082

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 729BFC233629082 Datasheet

Current PartRFQ

F339MX233331MFP2B0

Vishay Beyschlag/Draloric/BC ComponentsIn Stock: 6210F339MX233331MFP2B0 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The F339MX233331MFP2B0 qualifies as a parametric equivalent to the BFC233629082 based on the following critical substitution criteria:

• Identical capacitance value: 0.033 µF
• Matching tolerance specification: ±20%
• Equivalent voltage ratings: 630V DC / 310V AC
• Identical dielectric material: Polypropylene (PP), Metallized
• Matching operating temperature range: -55°C ~ 110°C
• Identical mechanical configuration: Through Hole, Radial package
• Matching physical dimensions: 0.689" L x 0.197" W (17.50mm x 5.00mm)
• Identical lead spacing: 0.591" (15.00mm)
• Matching termination type: PC Pins
• Equivalent application rating: X2, EMI/RFI Suppression

Both parts are manufactured by Vishay Beyschlag/Draloric/BC Components and maintain Active product status, ensuring long-term availability and supply chain stability.

Parameter Comparison

Engineering Selection Recommendations

Both the BFC233629082 and F339MX233331MFP2B0 are suitable for direct substitution in applications requiring 0.033 µF film capacitors with 630V DC ratings. Selection between these parts should be based on:

• Inventory availability: BFC233629082 has 714 units in stock; F339MX233331MFP2B0 has 6172 units in stock
• Supply chain lead times and procurement timelines
• Compliance requirements: Both parts are ROHS3 Compliant and carry EAR99 ECCN classification
• Long-term product lifecycle: Both maintain Active status, ensuring sustained availability

The F339MX233331MFP2B0 offers higher inventory levels, which may provide advantages for high-volume production runs or extended supply chain planning.

Frequently Asked Questions (FAQ)

Q: Can F339MX233331MFP2B0 be used as a direct replacement for BFC233629082?

A: Yes. Both parts share identical electrical specifications (0.033 µF, ±20%, 630V DC), dielectric material (Polypropylene metallized), mechanical configuration (Through Hole Radial), physical dimensions (17.50mm x 5.00mm), and lead spacing (15.00mm). They are functionally interchangeable in circuit applications.

Q: Are there any differences in compliance or certifications between these parts?

A: Both parts are ROHS3 Compliant. The BFC233629082 lists Moisture Sensitivity Level (MSL) as 1 (Unlimited), while the F339MX233331MFP2B0 lists MSL as Not Applicable. Both carry identical ECCN (EAR99) and HTSUS (8532.25.0020) classifications.

Q: What is the significance of the X2 rating on these capacitors?

A: The X2 rating indicates these capacitors are suitable for use across the AC mains supply with specific voltage and safety requirements. This rating applies to both the main part and substitute, confirming equivalent application suitability.

Q: Do these parts require any special handling or storage considerations?

A: Both parts carry MSL ratings indicating standard handling procedures. The BFC233629082 specifies MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard component storage practices apply to both parts.

Q: Can these capacitors be used in high-temperature applications?

A: Both parts are rated for operating temperatures from -55°C to 110°C, making them suitable for standard industrial and commercial temperature ranges. Application-specific thermal analysis should be performed for extreme operating conditions.