Request Quote
(Ships tomorrow)
BD82007FVJ-MGE2 Equivalent & Substitute Parts
Part Overview
The BD82007FVJ-MGE2 is an N-Channel power switch driver manufactured by Rohm Semiconductor, designed for USB switching applications. This active product operates as a 1:1 high-side switch with integrated current limiting, over-temperature, and under-voltage lockout protection. The part is qualified to AEC-Q100 automotive standards and is RoHS3 compliant. Substitute parts are identified when equivalent electrical characteristics, mechanical packaging, and compliance certifications align with the original specification.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | BD82007FVJ-MGE2 |
| Manufacturer | Rohm Semiconductor |
| Category | Power Management (PMIC) |
| Switch Type | USB Switch |
| Output Type | N-Channel |
| Output Configuration | High Side |
| Number of Outputs | 1 |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V ~ 5.5V |
| Current - Output (Max) | 3A |
| Rds On (Typ) | 70mOhm |
| Input Type | Non-Inverting |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package / Case | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) |
| Mounting Type | Surface Mount |
| Grade | Automotive |
| Qualification | AEC-Q100 |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Product Status | Active |
Substitute Part Grouping Explanation
Substitution of the BD82007FVJ-MGE2 is determined by equivalence across the following critical parameters:
- Switch Type: USB Switch
- Output Type and Configuration: N-Channel, High Side, 1:1 ratio
- Electrical Performance: 3A maximum output current, 70mOhm typical on-resistance, 2.7V ~ 5.5V load voltage range
- Protection Features: Current limiting, over-temperature, and UVLO protection
- Package Compatibility: 8-TSSOP surface mount form factor
- Compliance: Automotive grade, AEC-Q100 qualified, RoHS3 compliant, MSL 1
The BD82006FVJ-MGE2 meets all these criteria and is classified as a parametric equivalent.
Parameter Comparison
| Parameter | BD82007FVJ-MGE2 | BD82006FVJ-MGE2 |
|---|---|---|
| Manufacturer | Rohm Semiconductor | Rohm Semiconductor |
| Switch Type | USB Switch | USB Switch |
| Output Type | N-Channel | N-Channel |
| Output Configuration | High Side | High Side |
| Number of Outputs | 1 | 1 |
| Ratio - Input:Output | 1:1 | 1:1 |
| Voltage - Load | 2.7V ~ 5.5V | 2.7V ~ 5.5V |
| Current - Output (Max) | 3A | 3A |
| Rds On (Typ) | 70mOhm | 70mOhm |
| Input Type | Non-Inverting | Non-Inverting |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO | Current Limiting (Fixed), Over Temperature, UVLO |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) |
| Package / Case | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) | 8-TSSOP, 8-MSOP (0.118", 3.00mm Width) |
| Mounting Type | Surface Mount | Surface Mount |
| Grade | Automotive | Automotive |
| Qualification | AEC-Q100 | AEC-Q100 |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | 1 (Unlimited) |
| Product Status | Active | Active |
Engineering Selection Recommendations
Both the BD82007FVJ-MGE2 and BD82006FVJ-MGE2 are active products from Rohm Semiconductor with identical electrical specifications, package form factors, and compliance certifications. Selection between these parts is based on availability and supply chain requirements. Both parts carry AEC-Q100 automotive qualification and RoHS3 compliance, making them suitable for equivalent use in automotive and industrial USB switching applications. The MSL 1 rating indicates unlimited shelf life under standard storage conditions.
Frequently Asked Questions (FAQ)
Q: Can BD82006FVJ-MGE2 be used as a direct replacement for BD82007FVJ-MGE2?
A: Yes. Both parts are parametric equivalents with identical electrical characteristics, output current ratings, on-resistance, voltage ranges, protection features, and package specifications. They are interchangeable in circuit design.
Q: Are there any differences in automotive qualification between these parts?
A: No. Both parts are AEC-Q100 qualified and automotive grade, meeting the same reliability and quality standards.
Q: What is the significance of the 8-TSSOP package specification?
A: The 8-TSSOP (Thin Shrink Small Outline Package) is a surface mount form factor with 0.118" width and 3.00mm body width. Both substitute parts use this identical package, ensuring PCB layout and footprint compatibility.
Q: Does MSL 1 rating affect storage or handling requirements?
A: MSL 1 indicates unlimited moisture sensitivity level, meaning these parts do not require special moisture control during storage or handling. Standard component storage conditions are sufficient.
Q: Are both parts RoHS3 compliant?
A: Yes. Both BD82007FVJ-MGE2 and BD82006FVJ-MGE2 are ROHS3 compliant, meeting current environmental and hazardous substance restrictions.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts