BD6513F-E2 Equivalent & Substitute Parts

Part Overview

The BD6513F-E2 is a high-side N-channel power switch driver manufactured by ROHM Semiconductor, designed for USB switching applications with dual-channel output configuration. This component operates at 3V to 5.5V load voltage with a maximum output current of 500mA per channel and integrated fault protection including current limiting, over-temperature, reverse current, and UVLO monitoring.

The BD6513F-E2 carries a "Not For New Designs" product status, indicating it is no longer recommended for new development. Equivalent and substitute parts are necessary to ensure design continuity, maintain supply chain flexibility, and support ongoing production requirements for existing applications.

Substiute Parts

BD6513F-E2

ROHM SemiconductorIn Stock: 4463BD6513F-E2 Datasheet

Current PartRFQ

BD6516F-E2

Rohm SemiconductorIn Stock: 21358BD6516F-E2 Datasheet

SimilarRFQ

BD6512F-E2

Rohm SemiconductorIn Stock: 98854BD6512F-E2 Datasheet

Parametric EquivalentRFQ

BD6513F-E2

ROHM SemiconductorIn Stock: 4463BD6513F-E2 Datasheet

Parametric EquivalentRFQ

SP2526A-1EN-L/TR

MaxLinear, Inc.In Stock: 25175SP2526A-1EN-L/TR Datasheet

SimilarRFQ

SP2526A-2EN-L/TR

MaxLinear, Inc.In Stock: 41949SP2526A-2EN-L/TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BD6513F-E2 are classified based on strict electrical and mechanical parameter alignment. The primary substitution criteria are:

Critical Parameters for Substitution:

• Switch Type: USB Switch
• Number of Outputs: 2
• Ratio - Input:Output: 1:2
• Output Configuration: High Side
• Output Type: N-Channel
• Voltage - Load: 3V ~ 5.5V
• Interface: On/Off
• Input Type: Non-Inverting
• Features: Status Flag
• Fault Protection: Current Limiting (Fixed), Over Temperature, UVLO
• Package / Case: 8-SOIC form factor
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant

Allowable Parameter Variations:

• Current - Output (Max): 500mA to 600mA (higher current capability is acceptable)
• Rds On (Typ): 100mOhm to 110mOhm (minor resistance variation)
• Operating Temperature: -25°C to -40°C minimum (wider range acceptable)
• Moisture Sensitivity Level (MSL): 1 to 3 (higher MSL acceptable with appropriate handling)
• Package Width: 3.90mm to 4.40mm (minor dimensional variation within 8-SOIC standard)
• Packaging Format: Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® (format variation acceptable)

Parameter Comparison

Engineering Selection Recommendations

BD6516F-E2 (ROHM Semiconductor)

The BD6516F-E2 is the primary recommended substitute for the BD6513F-E2. Both parts are manufactured by ROHM Semiconductor and maintain identical electrical specifications with the exception of Rds On (110mOhm vs. 100mOhm), which represents a negligible 10% increase in on-resistance. The BD6516F-E2 carries an Active product status, ensuring long-term availability and continued manufacturer support. Both parts are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity, indicating superior handling characteristics. The BD6516F-E2 is suitable for direct replacement in existing designs.

SP2526A-2EN-L/TR (MaxLinear, Inc.)

The SP2526A-2EN-L/TR is a cross-manufacturer substitute manufactured by MaxLinear, Inc., with Active product status. This part provides enhanced current capability (600mA vs. 500mA) and extended operating temperature range (-40°C to 85°C vs. -25°C to 85°C). The SP2526A-2EN-L/TR is packaged in Tape & Reel format matching the BD6513F-E2. The primary consideration is the increased Moisture Sensitivity Level (MSL 3 vs. MSL 1), requiring adherence to 168-hour bake-out procedures prior to reflow soldering. This part is suitable for applications requiring higher current capacity or extended low-temperature operation.

SP2526A-1EN-L/TR (MaxLinear, Inc.)

The SP2526A-1EN-L/TR is functionally equivalent to SP2526A-2EN-L/TR with identical electrical specifications but supplied in Cut Tape (CT) & Digi-Reel® packaging format. Selection between SP2526A-1EN-L/TR and SP2526A-2EN-L/TR depends on procurement and assembly requirements. Both parts carry Active product status and are suitable for new designs.

BD6512F-E2 (ROHM Semiconductor)

The BD6512F-E2 is a parametric equivalent with identical electrical specifications to the BD6513F-E2 (100mOhm Rds On). However, this part carries an Obsolete product status, indicating discontinued manufacturer support and potential supply constraints. The BD6512F-E2 is not recommended for new designs or ongoing production unless existing inventory is available and supply continuity is confirmed.

Frequently Asked Questions (FAQ)

Q: Can the BD6516F-E2 directly replace the BD6513F-E2 without PCB modifications?

A: Yes. The BD6516F-E2 is pin-compatible and functionally equivalent. Both parts use the 8-SOIC package with identical pinout and electrical interface. The 10mOhm increase in Rds On (110mOhm vs. 100mOhm) is within acceptable tolerance for USB switching applications and does not require circuit redesign.

Q: What is the primary difference between SP2526A-1EN-L/TR and SP2526A-2EN-L/TR?

A: The parts are electrically identical. The difference is packaging format: SP2526A-1EN-L/TR is supplied in Cut Tape (CT) & Digi-Reel® format, while SP2526A-2EN-L/TR is supplied in Tape & Reel (TR) format. Selection depends on assembly line requirements and procurement preferences.

Q: Why does the SP2526A series have higher Moisture Sensitivity Level (MSL 3) compared to ROHM parts (MSL 1)?

A: Moisture Sensitivity Level is determined by the component's manufacturing process and materials. MSL 3 (168 Hours) requires that components be baked at 125°C for 24 hours within 168 hours prior to reflow soldering to remove absorbed moisture. This is a standard industry procedure and does not affect component functionality or reliability when proper handling is followed.

Q: Can I use SP2526A parts in applications requiring the full -25°C to 85°C operating range?

A: Yes. The SP2526A series supports -40°C to 85°C operating temperature, which exceeds the -25°C to 85°C requirement of the BD6513F-E2. The extended low-temperature capability of the SP2526A series is a superset of the original specification.

Q: Is the BD6512F-E2 suitable for new production?

A: No. The BD6512F-E2 carries an Obsolete product status. While parametrically equivalent to the BD6513F-E2, this part is no longer manufactured or supported. Use BD6516F-E2 or SP2526A series for new designs and ongoing production.

Q: What is the impact of the 100mA higher current rating in SP2526A parts (600mA vs. 500mA)?

A: The higher current rating provides additional design margin and thermal headroom. If your application requires only 500mA per channel, both the original 500mA-rated parts and the 600mA-rated SP2526A parts are suitable. The 600mA rating does not introduce any compatibility issues.

Q: Are all substitute parts ROHS3 Compliant?

A: BD6513F-E2, BD6516F-E2, and BD6512F-E2 are ROHS3 Compliant. SP2526A-1EN-L/TR is ROHS3 Compliant. SP2526A-2EN-L/TR is listed as RoHS Compliant. All parts meet environmental compliance requirements for EU and global markets.