BD6100CS_S2_00001 Equivalent & Substitute Parts

Part Overview

The BD6100CS_S2_00001 is a Schottky diode array manufactured by Panjit International Inc., configured as a 1 Pair Common Cathode arrangement rated for 100 V DC reverse voltage and 6 A average rectified current per diode. The device is packaged in a Surface Mount TO-252-3 (DPAK) configuration with two leads and a tab.

This part carries a product status designation of "Not For New Designs," indicating that while functional and available in inventory, it is no longer recommended for new circuit development. Identifying equivalent substitute parts is necessary to ensure design continuity, maintain supply chain flexibility, and support long-term product reliability in applications where this diode array is currently deployed.

Substiute Parts

BD6100CS_S2_00001

Panjit International Inc.In Stock: 880BD6100CS_S2_00001 Datasheet

Current PartRFQ

BD6100CS_L2_00001

Panjit International Inc.In Stock: 15212BD6100CS_L2_00001 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BD6100CS_S2_00001 are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are:

Electrical Parameters (Must Match):

• Diode Configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 100 V
• Current - Average Rectified (Io) (per Diode): 6 A
• Voltage - Forward (Vf) (Max) @ If: 800 mV @ 3 A
• Speed: Fast Recovery ≤ 500 ns, > 200 mA (Io)
• Current - Reverse Leakage @ Vr: 50 µA @ 100 V
• Operating Temperature - Junction: -65°C ~ 175°C

Mechanical Parameters (Must Match):

• Package / Case: TO-252-3, DPAK (2 Leads + Tab), SC-63
• Mounting Type: Surface Mount

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts may differ in packaging format (Tape & Reel versus Cut Tape) and product status designation, provided all electrical, mechanical, and compliance parameters remain identical. The base product number BD6100 remains constant across all equivalent variants.

Parameter Comparison

Engineering Selection Recommendations

The BD6100CS_L2_00001 is a parametric equivalent substitute for the BD6100CS_S2_00001. Both parts share identical electrical specifications, mechanical packaging, and compliance certifications. The primary differences are packaging format and product status designation.

Packaging Format Consideration: The main part (BD6100CS_S2_00001) is supplied in Tape & Reel format, suitable for automated assembly processes. The substitute part (BD6100CS_L2_00001) is supplied in Cut Tape format, appropriate for manual handling or lower-volume assembly operations. Selection between these formats depends on production methodology and volume requirements.

Product Status Consideration: Both parts carry end-of-life designations. The main part is marked "Not For New Designs," while the substitute is marked "Obsolete." For applications currently using the BD6100CS_S2_00001, the substitute provides functional continuity with identical electrical and mechanical performance. For new circuit development, alternative active Schottky diode array solutions should be evaluated.

Compliance and Regulatory: Both parts maintain ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), ensuring compatibility with modern manufacturing and environmental standards.

Frequently Asked Questions (FAQ)

Q: Can BD6100CS_L2_00001 be used as a direct replacement for BD6100CS_S2_00001 in existing designs?

A: Yes. Both parts are parametrically equivalent across all electrical specifications, mechanical packaging, and compliance certifications. The diode array configuration, voltage ratings, current ratings, forward voltage characteristics, reverse leakage, and operating temperature range are identical. Direct substitution is electrically and mechanically valid.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Cut Tape packaging supplies components on individual tape segments, typically used for manual assembly or lower-volume production. Both formats contain the same component in the same package; the difference is in the delivery and handling method.

Q: Are there any thermal or electrical performance differences between these parts?

A: No. Both parts share identical thermal characteristics (operating temperature range -65°C to 175°C junction temperature) and electrical performance (100 V reverse voltage, 6 A average rectified current, 800 mV forward voltage at 3 A, 50 µA reverse leakage at 100 V, and fast recovery ≤ 500 ns).

Q: What does "Not For New Designs" and "Obsolete" product status mean?

A: "Not For New Designs" indicates the part is available but no longer recommended for new circuit development. "Obsolete" indicates the part is no longer manufactured and existing inventory is limited. Both designations reflect end-of-life status. For new applications, alternative active components should be evaluated.

Q: Are both parts RoHS compliant?

A: Yes. Both BD6100CS_S2_00001 and BD6100CS_L2_00001 are ROHS3 compliant and carry unlimited moisture sensitivity rating (MSL 1), meeting current environmental and manufacturing standards.

Q: Can these parts be used interchangeably in PCB assembly?

A: Yes, provided the assembly process accommodates the packaging format. If the design uses automated assembly with reel-fed components, the Tape & Reel format (BD6100CS_S2_00001) is appropriate. If manual assembly or cut-tape feeding is used, the Cut Tape format (BD6100CS_L2_00001) is appropriate. The TO-252-3 DPAK package footprint and pinout are identical for both parts.

Q: What is the base product number, and how does it relate to these variants?

A: The base product number is BD6100. Both BD6100CS_S2_00001 and BD6100CS_L2_00001 are variants of this base product, differentiated by packaging format and product status. The "CS" designation indicates Schottky technology, while the suffix (_S2_00001 or _L2_00001) specifies the packaging and revision level.