BD46292G-TR Equivalent & Substitute Parts

Part Overview

The BD46292G-TR is a voltage supervisor IC manufactured by Rohm Semiconductor, designed for power management applications requiring single-channel voltage monitoring and detection. This device operates as a CMOS output type supervisor with push-pull, totem pole output configuration and is classified as a Voltage Detector within the Power Management (PMIC) category. The part is currently in Active product status with 2973 units available in new original inventory. Equivalent substitute parts are identified when they maintain identical electrical parameters and mechanical compatibility while offering alternative sourcing options or inventory availability.

Substiute Parts

BD46292G-TR
Rohm SemiconductorIn Stock: 3062BD46292G-TR Datasheet
BD46292G-TR
Current Part
BD46E292G-MTR
Rohm SemiconductorIn Stock: 3896BD46E292G-MTR Datasheet
BD46E292G-MTR
Parametric Equivalent

Key Parameters

Parameter Value
Manufacturer Part Number BD46292G-TR
Manufacturer Rohm Semiconductor
Category Power Management (PMIC)
Type Voltage Detector
Number of Voltages Monitored 1
Voltage - Threshold 2.9V
Output Configuration Push-Pull, Totem Pole
Reset Active Low
Reset Timeout 180ms Minimum
Operating Temperature Range -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Supplier Device Package 5-SSOP
Packaging Format Tape & Reel (TR)
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level (MSL) 1 (Unlimited)
REACH Status REACH Unaffected
Product Status Active

Substitute Part Grouping Explanation

Substitute parts for the BD46292G-TR are identified based on strict parametric equivalence across the following critical criteria:

Electrical Parameters (Must Match):

  • Voltage threshold: 2.9V
  • Number of monitored channels: 1
  • Output type: Push-Pull, Totem Pole
  • Reset polarity: Active Low
  • Reset timeout: 180ms Minimum
  • Operating temperature range: -40°C ~ 105°C

Mechanical Parameters (Must Match):

  • Package type: SC-74A, SOT-753
  • Device package: 5-SSOP
  • Mounting type: Surface Mount
  • Packaging format: Tape & Reel (TR)

Compliance Parameters (Must Match):

  • RoHS Status: ROHS3 Compliant
  • REACH Status: REACH Unaffected

The BD46E292G-MTR qualifies as a parametric equivalent because it maintains identical electrical specifications, mechanical compatibility, and regulatory compliance across all critical parameters.

Parameter Comparison

Parameter BD46292G-TR (Main Part) BD46E292G-MTR (Substitute)
Manufacturer Rohm Semiconductor Rohm Semiconductor
Category Power Management (PMIC) Power Management (PMIC)
Type Voltage Detector Voltage Detector
Number of Voltages Monitored 1 1
Voltage - Threshold 2.9V 2.9V
Output Configuration Push-Pull, Totem Pole Push-Pull, Totem Pole
Reset Active Low Active Low
Reset Timeout 180ms Minimum 180ms Minimum
Operating Temperature Range -40°C ~ 105°C (TA) -40°C ~ 105°C (TA)
Mounting Type Surface Mount Surface Mount
Package / Case SC-74A, SOT-753 SC-74A, SOT-753
Supplier Device Package 5-SSOP 5-SSOP
Packaging Format Tape & Reel (TR) Tape & Reel (TR)
RoHS Status ROHS3 Compliant ROHS3 Compliant
REACH Status REACH Unaffected REACH Unaffected
Product Status Active Active
Current Inventory 2973 Pcs 3831 Pcs

Engineering Selection Recommendations

Both the BD46292G-TR and BD46E292G-MTR are Active status products manufactured by Rohm Semiconductor with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on inventory availability and supply chain requirements. The BD46E292G-MTR offers higher current inventory (3831 units versus 2973 units), making it suitable for applications requiring extended lead time assurance or higher volume procurement. Both parts are functionally interchangeable in applications requiring a 2.9V single-channel voltage supervisor with push-pull output and 180ms minimum reset timeout in the -40°C to 105°C operating range.

Frequently Asked Questions (FAQ)

Q: Can BD46E292G-MTR be used as a direct replacement for BD46292G-TR?

A: Yes. Both parts are electrically and mechanically equivalent. They share identical voltage threshold (2.9V), output configuration (push-pull, totem pole), reset characteristics (active low, 180ms minimum), operating temperature range (-40°C to 105°C), and package specifications (5-SSOP, SC-74A, SOT-753). Both are ROHS3 compliant and REACH unaffected.

Q: What are the key differences between these two parts?

A: The primary differences are the base product number designation (BD46292 versus BD46E292) and moisture sensitivity level rating (MSL 1 for BD46292G-TR versus MSL 3 for BD46E292G-MTR). Electrical performance and mechanical compatibility remain identical.

Q: Are there any package or pinout differences?

A: No. Both parts use the identical SC-74A, SOT-753 package in 5-SSOP configuration with surface mount mounting type and tape & reel packaging format.

Q: Which part should be selected for new designs?

A: Either part is suitable for new designs. Selection should be based on current inventory availability, supplier lead times, and procurement preferences. Both maintain Active product status with full regulatory compliance.

Q: Are these parts suitable for high-volume production?

A: Yes. Both parts are available in tape & reel packaging format suitable for automated assembly. Current inventory levels (2973 and 3831 units respectively) support production requirements. Confirm availability with your supplier for specific volume requirements.

Request Quote (Ships tomorrow)