BD15IC0WHFV-GTR Linear Voltage Regulator Equivalent & Substitute Parts

Part Overview

The BD15IC0WHFV-GTR is a linear voltage regulator IC manufactured by Rohm Semiconductor, designed for positive fixed 1.5V output applications with 1A current capacity. This component is classified as a Power Management (PMIC) device and is currently in active production status. The device is housed in an 8-HTSOP-J package with exposed pad configuration, suitable for surface mount applications.

Finding equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and maintain component availability across manufacturing cycles.

Substiute Parts

BD15IC0WHFV-GTR

Rohm SemiconductorIn Stock: 6861BD15IC0WHFV-GTR Datasheet

Current PartRFQ

BD15IC0WEFJ-E2

ROHM SemiconductorIn Stock: 1537BD15IC0WEFJ-E2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BD15IC0WHFV-GTR are identified based on strict electrical and mechanical parameter matching. The substitution criteria are:

• Output voltage configuration: Positive fixed 1.5V
• Output current capacity: 1A minimum
• Maximum input voltage: 5.5V
• Voltage dropout: 0.6V @ 1A
• Package type: 8-HTSOP-J (8-SOIC with exposed pad)
• Mounting type: Surface Mount
• Control features: Enable function
• Protection features: Over Current, Over Temperature, Soft Start
• Operating temperature range: -25°C ~ 85°C
• Compliance: ROHS3 Compliant, REACH Unaffected

Parameter Comparison

Engineering Selection Recommendations

The BD15IC0WEFJ-E2 is a direct parametric equivalent to the BD15IC0WHFV-GTR. Both components are manufactured by Rohm Semiconductor and share identical electrical specifications, package configuration, and compliance certifications. Both parts are ROHS3 compliant, REACH unaffected, and classified under the same ECCN and HTSUS codes.

Selection between these parts should be based on inventory availability and supply chain requirements. Both components are active products suitable for direct substitution in applications requiring a 1.5V fixed output linear voltage regulator with 1A output current capacity.

Frequently Asked Questions (FAQ)

Q: Can BD15IC0WEFJ-E2 be used as a direct replacement for BD15IC0WHFV-GTR?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, output voltage, current capacity, dropout voltage, package type, and protection features. They are interchangeable for applications requiring a 1.5V fixed output linear regulator with 1A output current.

Q: Are there any package or pinout differences between these parts?

A: No. Both components use the 8-HTSOP-J package configuration (8-SOIC with 0.154" width and exposed pad). The physical dimensions and pinout are identical, allowing direct PCB substitution.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by output voltage (1.5V fixed), output current (1A), maximum input voltage (5.5V), dropout voltage (0.6V @ 1A), package type (8-HTSOP-J), operating temperature range (-25°C ~ 85°C), and protection features (Over Current, Over Temperature, Soft Start).

Q: Are both parts compliant with environmental and regulatory standards?

A: Yes. Both BD15IC0WHFV-GTR and BD15IC0WEFJ-E2 are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes. Both have MSL rating of 1 (Unlimited moisture sensitivity level).

Q: What is the difference between the two part numbers?

A: The part numbers differ in their packaging and distribution designations. BD15IC0WHFV-GTR uses the GTR suffix, while BD15IC0WEFJ-E2 uses the E2 suffix. These designations reflect different packaging batches or distribution channels from Rohm Semiconductor, but the electrical and mechanical specifications remain identical.