BD1060CS_S2_00001 Equivalent & Substitute Parts

Part Overview

The BD1060CS_S2_00001 is a Schottky diode array manufactured by Panjit International Inc., configured as 1 pair common cathode with 60 V reverse voltage rating and 10 A average rectified current per diode. The device is packaged in TO-252-3 DPAK surface mount configuration with fast recovery characteristics suitable for high-frequency rectification applications.

The BD1060CS_S2_00001 carries an obsolete product status. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production requirements for applications utilizing this diode array.

Substiute Parts

BD1060CS_S2_00001

Panjit International Inc.In Stock: 3785BD1060CS_S2_00001 Datasheet

Current PartRFQ

BD1060CS_L2_00001

Panjit International Inc.In Stock: 974BD1060CS_L2_00001 Datasheet

Parametric EquivalentRFQ

MBRD1060CT-TP

Micro Commercial CoIn Stock: 963MBRD1060CT-TP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BD1060CS_S2_00001 are identified based on strict parametric equivalence across the following critical parameters:

Electrical Parameters (Must Match):

• Diode configuration: 1 pair common cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io) (per Diode): 10 A
• Voltage - Forward (Vf) (Max) @ If: 750 mV @ 5 A
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)

Mechanical Parameters (Must Match):

• Mounting Type: Surface Mount
• Package / Case: TO-252-3, DPAK (2 Leads + Tab), SC-63

Compliance Parameters (Must Match):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Substitute parts are grouped into two categories: parametric equivalents from the same manufacturer with different packaging configurations, and parametric equivalents from alternative manufacturers with identical electrical and mechanical specifications.

Parameter Comparison

Engineering Selection Recommendations

BD1060CS_L2_00001 (Panjit International Inc.)

The BD1060CS_L2_00001 is a direct parametric equivalent to the BD1060CS_S2_00001 with identical electrical and thermal specifications. The primary distinction is packaging configuration: BD1060CS_L2_00001 is supplied in Tape & Reel (TR) format versus Cut Tape (CT) for the original part. Both parts carry active product status from Panjit International Inc., ensuring ongoing availability and manufacturing support. This substitute is recommended for applications requiring continuous supply and standard reel packaging for automated assembly processes.

MBRD1060CT-TP (Micro Commercial Co)

The MBRD1060CT-TP is a parametric equivalent from alternative manufacturer Micro Commercial Co, maintaining identical electrical ratings, diode configuration, and package form factor. This part carries active product status. Two operational differences exist: reverse leakage current is specified at 500 µA @ 60 V (versus 50 µA for Panjit parts), and maximum junction operating temperature is -65°C to 150°C (versus -65°C to 175°C for Panjit parts). These differences do not affect substitution validity for applications operating within the MBRD1060CT-TP temperature and leakage specifications. This substitute provides supply diversification through an alternative manufacturer source.

Frequently Asked Questions (FAQ)

Q: Can BD1060CS_L2_00001 be used as a direct replacement for BD1060CS_S2_00001?

A: Yes. BD1060CS_L2_00001 is a parametric equivalent with identical electrical specifications, diode configuration, forward voltage, reverse voltage rating, current rating, and thermal operating range. The only difference is packaging format: Cut Tape (CT) versus Tape & Reel (TR). Both are suitable for the same circuit applications.

Q: What is the difference between Cut Tape and Tape & Reel packaging?

A: Cut Tape (CT) packaging supplies components in individual strips cut to specific lengths, typically for lower-volume or manual assembly applications. Tape & Reel (TR) packaging supplies components on continuous reels, optimized for high-volume automated assembly processes. Electrical and mechanical specifications are identical between the two formats.

Q: Can MBRD1060CT-TP replace BD1060CS_S2_00001 in all applications?

A: MBRD1060CT-TP is a parametric equivalent with matching voltage, current, and package specifications. However, two operational parameters differ: reverse leakage current (500 µA versus 50 µA) and maximum junction temperature (150°C versus 175°C). Substitution is valid for applications where these specifications are acceptable. Applications requiring the lower leakage current or higher temperature rating should use Panjit parts.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. BD1060CS_L2_00001 and MBRD1060CT-TP are both ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), matching the compliance profile of BD1060CS_S2_00001.

Q: What is the significance of the "1 Pair Common Cathode" configuration?

A: This configuration indicates the diode array contains two diodes sharing a common cathode connection. This internal connection topology must be matched in substitute parts to ensure circuit compatibility. All listed substitutes maintain this configuration.

Q: Why is BD1060CS_S2_00001 marked as obsolete?

A: Obsolete status indicates the manufacturer has discontinued production of this specific part number. Active equivalent alternatives (BD1060CS_L2_00001 and MBRD1060CT-TP) are available to support ongoing design and production requirements.

Q: Can I mix BD1060CS_S2_00001 and BD1060CS_L2_00001 in the same production run?

A: Yes. Both parts are parametrically identical and interchangeable. Mixing is acceptable from an electrical and functional standpoint. However, packaging format differences (Cut Tape versus Tape & Reel) may require separate handling procedures in automated assembly environments.