BCW68FVL Equivalent & Substitute Parts

Part Overview

The BCW68FVL is an active-status PNP bipolar junction transistor manufactured by Nexperia USA Inc., designed for surface mount applications in the TO-236AB package. This automotive-grade component operates at maximum ratings of 45 V collector-emitter breakdown voltage, 800 mA collector current, and 250 mW power dissipation, with a transition frequency of 80 MHz. The BCW68FVL is qualified to AEC-Q101 automotive standards and maintains ROHS3 compliance with unlimited moisture sensitivity rating.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are required due to inventory constraints, manufacturing discontinuation, or design flexibility within specified parameter tolerances.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Collector Current (Max)	800	mA
Collector-Emitter Breakdown Voltage (Max)	45	V
Power Dissipation (Max)	250	mW
Transition Frequency	80	MHz
DC Current Gain (hFE Min)	100	@ 100mA, 1V
Vce Saturation (Max)	450mV / 500mV	@ 50mA, 500mA
Package Type	TO-236-3 / SOT-23-3	—
Mounting Type	Surface Mount	—
Operating Temperature (Max)	150	°C
Grade	Automotive	—
Qualification	AEC-Q101	—

Substitute Part Grouping Explanation

Substitute parts for the BCW68FVL are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalent (Direct Substitution): Parts that maintain identical electrical specifications and automotive qualification. The BCW68FR meets all electrical parameters of the BCW68FVL, including 45 V breakdown voltage, 800 mA collector current, 250 mW power rating, 80 MHz transition frequency, and AEC-Q101 qualification. Both parts share the same base product number (BCW68) and are manufactured by Nexperia USA Inc. The BCW68FR differs only in packaging designation (Tape & Reel vs. supplier device package notation) and inventory availability.

Similar Substitutes (Conditional Substitution): Parts that share the same physical package (TO-236-3 / SOT-23-3) and PNP transistor type but operate within different electrical parameter ranges. The MMBT2907ALT1G, SMMBT2907ALT1G, and SMMBT2907ALT3G are manufactured by onsemi and feature higher collector-emitter breakdown voltage (60 V vs. 45 V), higher transition frequency (200 MHz vs. 80 MHz), and higher power dissipation (300 mW vs. 250 mW). These parts are suitable for applications where the BCW68FVL's electrical specifications represent a design margin, provided the circuit design accommodates the different saturation voltage characteristics and the absence of automotive-grade qualification for certain applications.

Key parameters determining substitution eligibility:

Transistor polarity (PNP)
Physical package compatibility (TO-236-3 / SOT-23-3)
Collector current rating (minimum 800 mA for direct substitution; 600 mA for conditional substitution)
Collector-emitter breakdown voltage (minimum 45 V for direct substitution; 60 V acceptable for conditional substitution)
Surface mount mounting type
RoHS3 compliance

Parameter Comparison

Parameter	BCW68FVL	BCW68FR	MMBT2907ALT1G	SMMBT2907ALT1G	SMMBT2907ALT3G
Manufacturer	Nexperia USA Inc.	Nexperia USA Inc.	onsemi	onsemi	onsemi
Transistor Type	PNP	PNP	PNP	PNP	PNP
Collector Current (Max)	800 mA	800 mA	600 mA	600 mA	600 mA
Collector-Emitter Breakdown Voltage (Max)	45 V	45 V	60 V	60 V	60 V
Power Dissipation (Max)	250 mW	250 mW	300 mW	300 mW	300 mW
Transition Frequency	80 MHz	80 MHz	200 MHz	200 MHz	200 MHz
DC Current Gain (hFE Min)	100 @ 100mA, 1V	100 @ 100mA, 1V	100 @ 150mA, 10V	100 @ 150mA, 10V	100 @ 150mA, 10V
Vce Saturation (Max)	450mV @ 50mA, 500mV @ 500mA	450mV @ 50mA, 500mV @ 500mA	1.6V @ 50mA, 500mA	1.6V @ 50mA, 500mA	1.6V @ 50mA, 500mA
Package / Case	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Operating Temperature (Max)	150°C	150°C	150°C	150°C	150°C
Grade	Automotive	Automotive	—	—	—
Qualification	AEC-Q101	AEC-Q101	—	—	—
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

BCW68FR (Parametric Equivalent): This part is the primary substitute for the BCW68FVL. Both components are manufactured by Nexperia USA Inc., maintain identical electrical specifications, and carry AEC-Q101 automotive qualification. The BCW68FR is suitable for direct replacement in all applications where the BCW68FVL is specified. Selection of BCW68FR over BCW68FVL is determined by packaging format availability (Tape & Reel vs. alternative supplier designation) and inventory status. Both parts are active-status products with ROHS3 compliance and unlimited moisture sensitivity rating.

MMBT2907ALT1G, SMMBT2907ALT1G, SMMBT2907ALT3G (Similar Substitutes): These onsemi-manufactured parts are suitable for applications where the BCW68FVL's electrical specifications provide design margin and where automotive-grade qualification is not a requirement. The higher collector-emitter breakdown voltage (60 V) and transition frequency (200 MHz) of these parts accommodate designs operating below the BCW68FVL's maximum ratings. The increased saturation voltage (1.6 V vs. 450–500 mV) must be evaluated against circuit design constraints. These parts are active-status products with ROHS3 compliance and unlimited moisture sensitivity rating. Selection between MMBT2907ALT1G (Cut Tape & Digi-Reel packaging) and SMMBT2907ALT1G or SMMBT2907ALT3G (Tape & Reel packaging) is determined by packaging format requirements and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can BCW68FR be used as a direct replacement for BCW68FVL?

A: Yes. The BCW68FR is a parametric equivalent manufactured by Nexperia USA Inc. with identical electrical specifications, including 45 V collector-emitter breakdown voltage, 800 mA collector current, 250 mW power dissipation, 80 MHz transition frequency, and AEC-Q101 automotive qualification. Both parts are housed in the TO-236-3 / SOT-23-3 package and are suitable for direct substitution.

Q: What are the key differences between BCW68FVL and the onsemi MMBT2907 series?

A: The MMBT2907ALT1G, SMMBT2907ALT1G, and SMMBT2907ALT3G differ in three primary electrical parameters: collector current (600 mA vs. 800 mA), collector-emitter breakdown voltage (60 V vs. 45 V), and transition frequency (200 MHz vs. 80 MHz). Additionally, the onsemi parts lack automotive-grade qualification and AEC-Q101 certification. The saturation voltage is significantly higher (1.6 V vs. 450–500 mV), which may affect circuit performance in applications sensitive to saturation characteristics.

Q: Are the onsemi MMBT2907 variants suitable for automotive applications?

A: The MMBT2907ALT1G, SMMBT2907ALT1G, and SMMBT2907ALT3G are not qualified to AEC-Q101 automotive standards and do not carry automotive-grade designation. These parts are suitable for non-automotive applications or for automotive designs where automotive qualification is not mandated. For applications requiring AEC-Q101 qualification, the BCW68FVL or BCW68FR must be used.

Q: What is the difference between SMMBT2907ALT1G and SMMBT2907ALT3G?

A: Both SMMBT2907ALT1G and SMMBT2907ALT3G are manufactured by onsemi and share identical electrical specifications. The designation difference (ALT1G vs. ALT3G) reflects manufacturing or packaging variants. Both parts are supplied in Tape & Reel packaging and are active-status products with equivalent performance characteristics.

Q: Can I use MMBT2907ALT1G if my application does not require the full 800 mA collector current of the BCW68FVL?

A: Yes, provided the application operates within the MMBT2907ALT1G's maximum ratings of 600 mA collector current and 60 V collector-emitter breakdown voltage. The higher transition frequency (200 MHz) and power dissipation rating (300 mW) of the MMBT2907ALT1G provide additional design margin. However, the significantly higher saturation voltage (1.6 V) must be evaluated against circuit design requirements. Automotive qualification requirements must also be assessed independently.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The BCW68FVL, BCW68FR, MMBT2907ALT1G, SMMBT2907ALT1G, and SMMBT2907ALT3G are all ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Q: What packaging formats are available for each substitute part?

A: BCW68FVL and BCW68FR are supplied in Tape & Reel (TR) packaging. MMBT2907ALT1G is supplied in Cut Tape (CT) & Digi-Reel packaging. SMMBT2907ALT1G and SMMBT2907ALT3G are supplied in Tape & Reel (TR) packaging. All parts are housed in the TO-236-3 / SOT-23-3 surface mount package.

Q: Which substitute part should I select for maximum design flexibility?

A: For maximum design flexibility within non-automotive applications, the SMMBT2907ALT1G or SMMBT2907ALT3G offer higher collector-emitter breakdown voltage (60 V), higher transition frequency (200 MHz), and higher power dissipation (300 mW) compared to the BCW68FVL. For automotive applications or where AEC-Q101 qualification is required, the BCW68FR is the appropriate selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message