BCW60A_D87Z Equivalent & Substitute Parts

Part Overview

The BCW60A_D87Z is an NPN bipolar junction transistor manufactured by onsemi, designed for general-purpose switching and amplification applications. This device features a 32 V collector-emitter breakdown voltage, 100 mA maximum collector current, and 350 mW power dissipation in a surface mount SOT-23-3 package. The BCW60A_D87Z is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity. Substitute parts must maintain electrical compatibility within the specified parameter ranges while offering active product status and improved availability.

Key Parameters

Parameter	BCW60A_D87Z Value	Unit
Transistor Type	NPN	—
Voltage - Collector Emitter Breakdown (Max)	32	V
Current - Collector (Ic) (Max)	100	mA
Vce Saturation (Max) @ Ib, Ic	550 mV @ 1.25 mA, 50 mA	—
Current - Collector Cutoff (Max)	20	nA
DC Current Gain (hFE) (Min) @ Ic, Vce	120 @ 2 mA, 5 V	—
Power - Max	350	mW
Frequency - Transition	125	MHz
Mounting Type	Surface Mount	—
Package / Case	SOT-23-3	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the BCW60A_D87Z is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Transistor Type: NPN (required match)
Package / Case: SOT-23-3 (required match for mechanical compatibility)
Voltage - Collector Emitter Breakdown (Max): Must equal or exceed 32 V
Current - Collector (Ic) (Max): Must equal or exceed 100 mA
Power - Max: Must equal or exceed 350 mW
Mounting Type: Surface Mount (required match)

Secondary Compatibility Factors:

DC Current Gain (hFE): Minimum 120 @ 2 mA, 5 V
Vce Saturation: Must not exceed 550 mV @ specified test conditions
Current - Collector Cutoff (Max): Must not exceed 20 nA
Moisture Sensitivity Level: MSL 1 (Unlimited) preferred

Substitute parts are grouped into two categories:

Category A - Direct Electrical Equivalents (32 V, 100 mA class): Parts meeting or exceeding all primary electrical parameters with identical voltage and current ratings. These include BCW32LT1G, BCW33LT1G, and NSVBCW32LT1G.

Category B - Functional Alternatives (30 V, 100 mA class): Parts with slightly reduced voltage rating (30 V) but equivalent current handling. These include BC848CLT1G and BC848B,235. These are suitable for applications where the 32 V rating is not critical.

Category C - Higher Current Alternatives (32 V, 800 mA class): Parts with identical voltage rating but significantly higher current capacity. BCW65CLT1G is suitable for applications requiring higher current handling within the same voltage envelope.

Category D - Higher Voltage Alternatives (45 V, 200 mA class): Parts with elevated voltage rating and moderate current increase. MMBT6429LT1G provides enhanced voltage margin for sensitive applications.

Category E - Higher Current, Lower Voltage Alternatives (30 V, 600 mA class): MMBT2222LT1G offers increased current capacity with slightly reduced voltage rating.

Category F - Higher Current, Lower Voltage Alternatives (30 V, 1.5 A class): 2SD2657KT146 provides significantly higher current capacity with reduced voltage rating and different package designation (SMT3).

Parameter Comparison

Part Number	Manufacturer	Vce(BR)max (V)	Ic(Max) (mA)	Vce Sat (mV)	hFE(Min)	Power (mW)	fT (MHz)	Package	Status
BCW60A_D87Z	onsemi	32	100	550	120	350	125	SOT-23-3	Obsolete
BCW32LT1G	onsemi	32	100	250	200	225	—	SOT-23-3	Active
BCW33LT1G	onsemi	32	100	250	420	300	—	SOT-23-3	Active
NSVBCW32LT1G	onsemi	32	100	250	200	225	—	SOT-23-3	Active
BC848CLT1G	onsemi	30	100	600	420	300	100	SOT-23-3	Active
BC848B,235	Nexperia USA Inc.	30	100	600	200	250	100	SOT-23-3	Active
BC848B-7-F	Diodes Incorporated	30	100	600	200	300	300	SOT-23-3	Active
BCW65CLT1G	onsemi	32	800	700	250	225	100	SOT-23-3	Active
MMBT2222LT1G	onsemi	30	600	1600	100	300	250	SOT-23-3	Active
MMBT6429LT1G	onsemi	45	200	600	500	225	700	SOT-23-3	Active
2SD2657KT146	Rohm Semiconductor	30	1500	350	270	200	330	SMT3	Active

Engineering Selection Recommendations

For Direct Replacement (Recommended Primary Substitutes):

BCW32LT1G and BCW33LT1G are the preferred direct replacements for BCW60A_D87Z. Both parts maintain the 32 V collector-emitter breakdown voltage and 100 mA maximum collector current specifications. BCW32LT1G and BCW33LT1G are manufactured by onsemi (same manufacturer as the original part), carry active product status, and are RoHS3 compliant. BCW33LT1G offers superior DC current gain (420 vs. 120) and improved saturation characteristics (250 mV vs. 550 mV), making it the optimal choice for most applications. Both parts are available in high inventory quantities and packaged in SOT-23-3 format.

NSVBCW32LT1G provides an alternative from onsemi with identical electrical specifications to BCW32LT1G and active product status, though with lower inventory availability.

For Voltage-Reduced Applications (Secondary Substitutes):

BC848CLT1G, BC848B,235, and BC848B-7-F are suitable substitutes where the 32 V rating is not critical and 30 V operation is acceptable. BC848CLT1G (onsemi) and BC848B-7-F (Diodes Incorporated) offer enhanced frequency response (100 MHz and 300 MHz respectively) compared to the original 125 MHz specification. BC848B,235 (Nexperia USA Inc.) is AEC-Q101 qualified for automotive applications. All three maintain 100 mA current capacity and SOT-23-3 packaging.

For Higher Current Applications:

BCW65CLT1G maintains the 32 V voltage rating while providing 800 mA maximum collector current, suitable for applications requiring increased current handling within the same voltage envelope. This part is onsemi-manufactured, RoHS3 compliant, and actively produced.

For Enhanced Voltage Margin:

MMBT6429LT1G provides 45 V collector-emitter breakdown voltage with 200 mA current capacity and exceptional frequency response (700 MHz). This part is suitable for noise-sensitive or high-frequency applications requiring additional voltage margin.

For Significantly Higher Current Requirements:

2SD2657KT146 (Rohm Semiconductor) offers 1.5 A maximum collector current with 30 V voltage rating. This part uses SMT3 package designation rather than standard SOT-23-3, requiring PCB layout verification before implementation.

All recommended substitutes carry RoHS3 compliance, REACH Unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental and regulatory profile of the original BCW60A_D87Z.

Frequently Asked Questions (FAQ)

Q: Can BCW32LT1G directly replace BCW60A_D87Z without circuit modification?

A: Yes. BCW32LT1G maintains identical voltage (32 V) and current (100 mA) ratings as BCW60A_D87Z. The improved saturation voltage (250 mV vs. 550 mV) and higher DC current gain (200 vs. 120) are beneficial characteristics that enhance circuit performance without requiring design changes. Both parts use SOT-23-3 packaging and are pin-compatible.

Q: What is the difference between BCW32LT1G and BCW33LT1G?

A: Both parts share identical voltage (32 V) and current (100 mA) specifications and SOT-23-3 packaging. BCW33LT1G provides higher DC current gain (420 vs. 200) and identical saturation voltage (250 mV). BCW33LT1G is the superior choice for applications sensitive to gain variation or requiring faster switching response. Selection between these parts depends on specific circuit gain requirements.

Q: Can I use BC848CLT1G as a substitute if my circuit operates at 30 V instead of 32 V?

A: Yes. BC848CLT1G is suitable for applications where the maximum supply voltage does not exceed 30 V. This part maintains 100 mA current capacity and SOT-23-3 packaging. The 2 V voltage reduction is acceptable for most general-purpose switching applications. Verify that your circuit's maximum operating voltage does not exceed 30 V before implementation.

Q: Why would I choose MMBT6429LT1G over BCW32LT1G?

A: MMBT6429LT1G is selected for applications requiring enhanced voltage margin (45 V vs. 32 V) or high-frequency operation (700 MHz vs. no specified transition frequency for BCW32LT1G). The trade-off is reduced maximum collector current (200 mA vs. 100 mA). This part is suitable for noise-sensitive circuits or RF applications where voltage headroom and frequency response are critical.

Q: Is BCW65CLT1G compatible with BCW60A_D87Z in terms of package and pinout?

A: Yes. BCW65CLT1G uses identical SOT-23-3 packaging and maintains the same pin configuration as BCW60A_D87Z. The primary difference is significantly higher maximum collector current (800 mA vs. 100 mA). This part is suitable for applications requiring higher current handling within the same voltage (32 V) and package envelope. No PCB layout changes are required.

Q: What is the significance of the SMT3 package designation for 2SD2657KT146?

A: 2SD2657KT146 uses SMT3 package designation rather than the standard SOT-23-3 used by BCW60A_D87Z and most substitute parts. While both packages are surface mount and similar in size, SMT3 may have different pad dimensions or thermal characteristics. Verify PCB footprint compatibility before selecting this part. This device is recommended only when the significantly higher current capacity (1.5 A) justifies the package verification effort.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All recommended substitute parts carry RoHS3 compliance status, matching the environmental regulatory profile of BCW60A_D87Z. All parts also carry REACH Unaffected status and MSL 1 (Unlimited) moisture sensitivity rating.

Q: Which substitute part offers the best availability?

A: MMBT6429LT1G offers the highest inventory availability at 155,200 pieces in stock. BCW32LT1G and BCW33LT1G provide strong availability at 21,473 and 3,400 pieces respectively. BC848CLT1G and MMBT2222LT1G also maintain high inventory levels (6,200 and 21,621 pieces respectively). All recommended substitutes are actively produced and readily available.

Q: Can I use BC848B-7-F (Diodes Incorporated) instead of BC848CLT1G (onsemi)?

A: Yes. Both parts maintain identical electrical specifications (30 V, 100 mA, SOT-23-3 package). BC848B-7-F offers superior frequency response (300 MHz vs. 100 MHz) and wider operating temperature range (-65°C to 150°C vs. -55°C to 150°C). Selection between these parts depends on frequency requirements and temperature operating range. Both are actively produced and widely available.

Q: What is the primary reason BCW60A_D87Z is obsolete?

A: BCW60A_D87Z is classified as obsolete, indicating onsemi has discontinued production. Substitute parts such as BCW32LT1G and BCW33LT1G provide equivalent or superior electrical performance with active product status and ongoing manufacturing support. These substitutes ensure long-term design continuity and supply chain reliability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message