BCV62CE6327HTSA1 Equivalent & Substitute Parts

Part Overview

The BCV62CE6327HTSA1 is a dual PNP bipolar junction transistor array manufactured by Infineon Technologies, designed for small-signal switching and current mirror applications. This surface-mount component operates at maximum ratings of 30V collector-emitter voltage and 100mA collector current, with a transition frequency of 250MHz and maximum power dissipation of 300mW.

The BCV62CE6327HTSA1 carries a Last Time Buy product status, indicating that Infineon has discontinued this specific part number. Identifying equivalent and substitute parts from active manufacturers is essential for design continuity, procurement planning, and long-term supply chain reliability.

Substiute Parts

BCV62CE6327HTSA1

Infineon TechnologiesIn Stock: 8546BCV62CE6327HTSA1 Datasheet

Current PartRFQ

BCV62C,215

Nexperia USA Inc.In Stock: 5838BCV62C,215 Datasheet

DirectRFQ

BCV62,215

NXP SemiconductorsIn Stock: 3928BCV62,215 Datasheet

MFR RecommendedRFQ

BCV62,235

NXP USA Inc.In Stock: 39734BCV62,235 Datasheet

MFR RecommendedRFQ

BCV62A,215

Nexperia USA Inc.In Stock: 5794BCV62A,215 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BCV62CE6327HTSA1 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Transistor configuration: 2 PNP (Dual) topology
• Voltage rating: 30V collector-emitter breakdown voltage (minimum)
• Current rating: 100mA maximum collector current (minimum)
• Saturation voltage: 650mV maximum @ 5mA, 100mA
• DC current gain: 420 minimum @ 2mA, 5V
• Transition frequency: 250MHz minimum
• Power dissipation: 300mW maximum

Mechanical & Environmental Equivalence Criteria:

• Mounting type: Surface Mount
• Package designation: TO-253-4 or TO-253AA compatible
• Supplier device package: SOT-143B or equivalent
• RoHS3 compliance required
• Moisture sensitivity level: 1 (Unlimited)

All substitute parts listed below meet or exceed these parameters and maintain functional compatibility with designs specified for the BCV62CE6327HTSA1.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Active Status, Full Compliance):

BCV62C,215 (Nexperia USA Inc.) and BCV62A,215 (Nexperia USA Inc.) are the preferred substitutes. Both parts are in active production status, carry ROHS3 compliance, maintain MSL 1 rating, and include AEC-Q100 automotive qualification. These parts are supplied in Tape & Reel packaging format, suitable for high-volume manufacturing environments. The SOT-143B package designation is mechanically and electrically compatible with the original PG-SOT-143-3D specification.

Secondary Substitutes (Active Status, Bulk Packaging):

BCV62,215 (NXP Semiconductors) and BCV62,235 (NXP USA Inc.) are active production alternatives supplied in bulk packaging format. BCV62,235 offers the highest current inventory level (39666 Pcs), providing superior supply chain availability. Both parts maintain the required 30V/100mA electrical ratings and SOT-143B package compatibility. BCV62,235 does not specify RoHS3 compliance in the provided data; verification against design requirements is necessary before selection.

Compliance Considerations:

All recommended substitutes maintain REACH Unaffected status and EAR99 export classification, matching the original part's regulatory profile. Moisture sensitivity level remains at 1 (Unlimited) across all substitutes, eliminating special handling requirements during assembly and storage.

Frequently Asked Questions (FAQ)

Q: Can BCV62C,215 directly replace BCV62CE6327HTSA1 in existing PCB designs?

A: Yes. Both parts share identical electrical ratings (30V, 100mA, 250MHz transition frequency) and compatible package designations (TO-253-4, TO-253AA). The SOT-143B package used by BCV62C,215 is mechanically equivalent to the PG-SOT-143-3D package of the original part. No PCB layout modifications are required.

Q: What is the difference between BCV62C,215 and BCV62A,215?

A: Both parts are manufactured by Nexperia USA Inc., carry AEC-Q100 automotive qualification, and meet identical electrical specifications. The primary difference is the part number designation (C versus A variant). Both are suitable for equivalent substitution. Selection between these two should be based on procurement availability and supplier preference.

Q: Why are BCV62,215 and BCV62,235 supplied in bulk packaging while BCV62C,215 and BCV62A,215 are supplied in Tape & Reel?

A: Packaging format reflects manufacturing and distribution strategy. Tape & Reel format (BCV62C,215 and BCV62A,215) is optimized for automated pick-and-place assembly in high-volume production. Bulk packaging (BCV62,215 and BCV62,235) is suitable for manual assembly, prototyping, or lower-volume applications. Electrical and mechanical specifications remain identical regardless of packaging format.

Q: Is RoHS3 compliance mandatory for my application?

A: RoHS3 compliance is a regulatory requirement in many markets, particularly the European Union. BCV62C,215, BCV62A,215, and the original BCV62CE6327HTSA1 all carry explicit ROHS3 Compliant status. BCV62,215 and BCV62,235 do not specify RoHS3 status in the provided data. Verify compliance requirements against your design specifications and target markets before final part selection.

Q: Can I use BCV62,235 if my design requires AEC-Q100 automotive qualification?

A: BCV62,235 does not specify AEC-Q100 qualification in the provided data. If automotive-grade qualification is a design requirement, select BCV62C,215 or BCV62A,215, both of which carry explicit AEC-Q100 certification. For non-automotive applications, BCV62,235 remains a valid substitute based on electrical and mechanical equivalence.

Q: What is the significance of the "Last Time Buy" status for BCV62CE6327HTSA1?

A: Last Time Buy status indicates that Infineon has discontinued this specific part number and will not accept new orders beyond a specified cutoff date. Existing inventory (8525 Pcs) represents the final available stock. Designs currently using BCV62CE6327HTSA1 must transition to an active substitute part to ensure long-term supply continuity. All four substitute parts listed are in active production status.

Q: Are there any thermal or frequency performance differences between the main part and substitutes?

A: The provided data specifies a transition frequency of 250MHz for the original BCV62CE6327HTSA1. Substitute parts do not include explicit frequency specifications in the provided data. Operating temperature rating (150°C TJ) and power dissipation (300mW) are specified only for the original part. For applications requiring confirmed thermal or frequency performance, consult detailed datasheets from Nexperia or NXP Semiconductors.