BCR1AM-12A-TB#C01 Equivalent & Substitute Parts

Part Overview

The BCR1AM-12A-TB#C01 is a standard TRIAC thyristor rated for 600V off-state voltage and 1A on-state current in a Through Hole TO-92 package. This component is classified as obsolete, which necessitates identification of active equivalent parts for ongoing design requirements and procurement continuity. The substitute part maintains identical electrical and mechanical specifications while offering active product status and current availability.

Substiute Parts

BCR1AM-12A-TB#C01

Renesas Electronics CorporationIn Stock: 835BCR1AM-12A-TB#C01 Datasheet

Current PartRFQ

BCR1AM-12A-TB#BD0

Renesas Electronics CorporationIn Stock: 747BCR1AM-12A-TB#BD0 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BCR1AM-12A-TB#C01 is determined by strict equivalence across the following electrical and mechanical parameters:

• Voltage - Off State: 600 V
• Current - On State (It (RMS)) (Max): 1 A
• Voltage - Gate Trigger (Vgt) (Max): 2 V
• Current - Non Rep. Surge 50, 60Hz (Itsm): 10A @ 60Hz
• Current - Gate Trigger (Igt) (Max): 7 mA
• Operating Temperature Range: -40°C ~ 125°C (TJ)
• Mounting Type: Through Hole
• Package / Case: TO-226-3, TO-92-3 (TO-226AA)

The identified substitute part BCR1AM-12A-TB#BD0 matches all specified parameters without deviation, confirming direct functional and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The BCR1AM-12A-TB#BD0 is the direct equivalent substitute for the obsolete BCR1AM-12A-TB#C01. Selection of the active part is justified by:

• Identical electrical specifications across all rated parameters
• Identical mechanical package and mounting configuration
• Active product status ensuring long-term availability and supply chain continuity
• Equivalent compliance certifications: ROHS3 Compliant, REACH Unaffected, EAR99 classification
• Identical moisture sensitivity level and environmental ratings
• Same manufacturer (Renesas Electronics Corporation) ensuring consistent quality and reliability

No design modifications or circuit adjustments are required for substitution.

Frequently Asked Questions (FAQ)

Q: Can BCR1AM-12A-TB#BD0 be used as a direct replacement for BCR1AM-12A-TB#C01?

A: Yes. Both parts are identical in electrical ratings, gate trigger characteristics, surge current capability, operating temperature range, and TO-92 package configuration. Direct substitution is possible without circuit modification.

Q: What is the primary reason for substituting the BCR1AM-12A-TB#C01?

A: The BCR1AM-12A-TB#C01 is classified as obsolete. The BCR1AM-12A-TB#BD0 maintains active product status, ensuring continued availability and supply chain reliability.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS3 compliance, REACH unaffected status, and EAR99 export classification. Moisture sensitivity level and environmental ratings are equivalent.

Q: Is the TO-92 package identical for both parts?

A: Yes. Both parts use the TO-226-3, TO-92-3 (TO-226AA) package designation with Through Hole mounting type. PCB layout and component placement require no modification.

Q: What are the critical electrical parameters that define substitution compatibility?

A: The 600V off-state voltage, 1A on-state current, 2V maximum gate trigger voltage, 10A surge current rating, and 7mA maximum gate trigger current define the substitution criteria. Both parts match these specifications exactly.