BCP69TA Equivalent & Substitute Parts

Part Overview

The BCP69TA is a PNP bipolar junction transistor manufactured by Diodes Incorporated, designed for surface mount applications in the SOT-223 package. This component is rated for 20 V collector-emitter breakdown voltage and 1 A maximum collector current, with a maximum power dissipation of 2 W and transition frequency of 100 MHz. The BCP69TA is classified as obsolete, necessitating identification of active equivalent and substitute parts for new designs and ongoing production requirements. Substitute parts must maintain electrical compatibility across critical parameters including voltage rating, current capacity, and thermal characteristics while meeting modern compliance standards.

Key Parameters

Parameter	BCP69TA Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) (Max)	1	A
Voltage - Collector Emitter Breakdown (Max)	20	V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A	—
DC Current Gain (hFE) (Min) @ Ic, Vce	63 @ 500mA, 1V	—
Power - Max	2	W
Frequency - Transition	100	MHz
Operating Temperature	-55 to 150	°C (TJ)
Mounting Type	Surface Mount	—
Package / Case	TO-261-4, TO-261AA	—
Supplier Device Package	SOT-223-3	—
RoHS Status	RoHS non-compliant	—

Substitute Part Grouping Explanation

Substitution of the BCP69TA is determined by strict electrical and mechanical compatibility across the following critical parameters:

Mandatory Compatibility Criteria:

Transistor Type: PNP (all substitutes must be PNP)
Voltage - Collector Emitter Breakdown (Max): 20 V (minimum requirement)
Current - Collector (Ic) (Max): 1 A or greater (equal or higher rating acceptable)
Package / Case: TO-261-4, TO-261AA (physical and pin compatibility)
Supplier Device Package: SOT-223 or SOT-223-3 (surface mount footprint compatibility)
Vce Saturation @ Ib, Ic: 500mV @ 100mA, 1A (switching performance)

Substitution Groups:

Group 1: Direct 1 A Equivalents (Active Status) Parts BCP69,115, BCP69T1G, and NSVBCP69T1G maintain the 1 A collector current rating with identical voltage and saturation specifications. These parts are manufactured by Nexperia USA Inc. and onsemi, both active suppliers with RoHS3 compliance.

Group 2: Enhanced Current Rating (2 A Variants) Parts BCP69-25,115 and BCP69-25,135 provide 2 A maximum collector current while maintaining 20 V voltage rating and SOT-223 package compatibility. These higher-current variants are suitable for applications requiring increased current capacity within the same thermal envelope.

Group 3: Automotive-Grade Variants Parts BCP69-16,115, BCP69-25,115, and BCP69-25,135 carry AEC-Q100 automotive qualification and Automotive grade designation, suitable for applications requiring automotive-level reliability.

Parameter Comparison

Parameter	BCP69TA	BCP69,115	BCP69-16,115	BCP69-25,115	BCP69-25,135	BCP69T1G	NSVBCP69T1G
Manufacturer	Diodes Inc.	Nexperia USA Inc.	Nexperia USA Inc.	Nexperia USA Inc.	Nexperia USA Inc.	onsemi	onsemi
Product Status	Obsolete	Active	Active	Active	Active	Active	Active
Transistor Type	PNP	PNP	PNP	PNP	PNP	PNP	PNP
Current - Collector (Ic) (Max)	1 A	1 A	1 A	2 A	2 A	1 A	1 A
Voltage - Collector Emitter Breakdown (Max)	20 V	20 V	20 V	20 V	20 V	20 V	20 V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A	500mV @ 100mA, 1A	500mV @ 100mA, 1A	500mV @ 100mA, 1A	600mV @ 200mA, 2A	500mV @ 100mA, 1A	500mV @ 100mA, 1A
DC Current Gain (hFE) (Min) @ Ic, Vce	63 @ 500mA, 1V	85 @ 500mA, 1V	100 @ 500mA, 1V	160 @ 500mA, 1V	100 @ 500mA, 1V	85 @ 500mA, 1V	85 @ 500mA, 1V
Power - Max	2 W	1.4 W	1.4 W	650 mW	650 mW	1.5 W	1.5 W
Frequency - Transition	100 MHz	140 MHz	140 MHz	140 MHz	140 MHz	60 MHz	60 MHz
Operating Temperature	-55 to 150°C	150°C	150°C	150°C	150°C	-65 to 150°C	-65 to 150°C
Package / Case	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA
Supplier Device Package	SOT-223-3	SOT-223	SOT-223	SOT-223	SOT-223	SOT-223 (TO-261)	SOT-223 (TO-261)
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Automotive Grade	—	—	Automotive	Automotive	Automotive	—	—
AEC-Q100 Qualification	—	—	Yes	Yes	Yes	—	—

Engineering Selection Recommendations

For Direct Replacement (1 A Applications):

BCP69,115 (Nexperia USA Inc.) and BCP69T1G / NSVBCP69T1G (onsemi) are functionally equivalent to the BCP69TA for applications requiring 1 A maximum collector current. All three parts are active products with RoHS3 compliance. BCP69,115 and BCP69-16,115 carry AEC-Q100 automotive qualification, suitable for automotive and industrial applications requiring enhanced reliability standards. BCP69T1G and NSVBCP69T1G are available in high inventory volumes and support extended operating temperature range (-65°C to 150°C).

For Enhanced Current Capacity (2 A Applications):

BCP69-25,115 and BCP69-25,135 provide 2 A maximum collector current rating while maintaining 20 V voltage specification and SOT-223 package compatibility. Both parts carry AEC-Q100 automotive qualification and are suitable for applications requiring higher current handling within the same thermal footprint. BCP69-25,135 specifies 600mV saturation voltage at 200mA/2A conditions, compared to 500mV at 100mA/1A for other variants.

Compliance Considerations:

All substitute parts are RoHS3 compliant, addressing the non-compliance status of the obsolete BCP69TA. Parts designated as Automotive grade (BCP69-16,115, BCP69-25,115, BCP69-25,135) meet AEC-Q100 qualification requirements for automotive applications. Selection between Nexperia and onsemi variants depends on supply chain requirements and existing qualification documentation.

Frequently Asked Questions (FAQ)

Q: Can BCP69,115 directly replace BCP69TA in existing designs?

A: BCP69,115 maintains electrical compatibility across all critical parameters: 1 A collector current, 20 V breakdown voltage, 500mV saturation voltage at specified conditions, and SOT-223 package. Physical footprint and pin configuration are identical. The part is active and RoHS3 compliant, addressing the obsolete status of BCP69TA.

Q: What is the difference between BCP69-16,115 and BCP69,115?

A: Both parts are manufactured by Nexperia USA Inc. with identical electrical ratings (1 A, 20 V, 140 MHz). BCP69-16,115 specifies minimum DC current gain of 100 @ 500mA/1V, compared to 85 for BCP69,115. BCP69-16,115 is supplied in Tape & Reel packaging, while BCP69,115 is available in Cut Tape & Digi-Reel format. Both carry AEC-Q100 automotive qualification.

Q: When should BCP69-25,115 or BCP69-25,135 be selected instead of 1 A variants?

A: The 2 A variants (BCP69-25,115 and BCP69-25,135) are selected for applications requiring collector current exceeding 1 A up to 2 A maximum. Both maintain 20 V voltage rating and SOT-223 package compatibility. BCP69-25,135 specifies saturation voltage at higher current conditions (600mV @ 200mA, 2A), suitable for applications with different bias point requirements.

Q: Are onsemi BCP69T1G and NSVBCP69T1G interchangeable?

A: BCP69T1G and NSVBCP69T1G are electrically identical PNP transistors with 1 A collector current, 20 V breakdown voltage, and SOT-223 package. The primary difference is packaging format: BCP69T1G is supplied in Cut Tape & Digi-Reel, while NSVBCP69T1G is supplied in Tape & Reel. Both are active products with extended operating temperature range (-65°C to 150°C) and RoHS3 compliance.

Q: What is the impact of transition frequency differences between substitutes?

A: BCP69TA specifies 100 MHz transition frequency. Nexperia variants (BCP69,115, BCP69-16,115, BCP69-25,115, BCP69-25,135) specify 140 MHz, providing higher frequency capability. onsemi variants (BCP69T1G, NSVBCP69T1G) specify 60 MHz, lower than the original part. Selection depends on application frequency requirements; higher transition frequency provides margin for high-speed switching applications.

Q: Are all substitute parts RoHS compliant?

A: All substitute parts listed are RoHS3 compliant. The original BCP69TA is RoHS non-compliant. Substitution with any listed part addresses RoHS compliance requirements for new designs and production.

Q: What packaging options are available for each substitute?

A: BCP69,115 is available in Cut Tape (CT) & Digi-Reel format. BCP69-16,115, BCP69-25,115, and BCP69-25,135 are supplied in Tape & Reel (TR) format. BCP69T1G is available in Cut Tape & Digi-Reel format. NSVBCP69T1G is supplied in Tape & Reel format. All parts use SOT-223 or SOT-223-3 supplier device packages with identical TO-261-4 and TO-261AA case designations.

Q: Do automotive-grade variants require additional qualification?

A: BCP69-16,115, BCP69-25,115, and BCP69-25,135 carry AEC-Q100 qualification and Automotive grade designation. These parts meet automotive reliability standards and are suitable for automotive applications without additional qualification. Non-automotive variants (BCP69,115, BCP69T1G, NSVBCP69T1G) are suitable for industrial and consumer applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message