BCP69,135 Equivalent & Substitute Parts

Part Overview

The BCP69,135 is an automotive-grade PNP bipolar junction transistor manufactured by Nexperia USA Inc., designed for surface mount applications in the SOT-223 package. This component operates at a maximum collector current of 1 A with a 20 V collector-emitter breakdown voltage and delivers 1.4 W maximum power dissipation. The device is qualified to AEC-Q100 automotive standards and maintains active product status with full RoHS3 compliance.

Equivalent and substitute parts are identified to address supply chain requirements, packaging format preferences, and application-specific performance needs while maintaining electrical and mechanical compatibility within the specified parameter ranges.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) (Max)	1	A
Voltage - Collector Emitter Breakdown (Max)	20	V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A	—
Current - Collector Cutoff (Max)	100nA	—
DC Current Gain (hFE) (Min) @ Ic, Vce	85 @ 500mA, 1V	—
Power - Max	1.4	W
Frequency - Transition	140	MHz
Operating Temperature (TJ)	150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-261-4, TO-261AA	—
Supplier Device Package	SOT-223	—
Grade	Automotive	—
Qualification	AEC-Q100	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution eligibility for the BCP69,135 is determined by strict adherence to the following electrical and mechanical parameters:

Critical Parameters for Substitution:

Transistor Type: PNP (mandatory match)
Current - Collector (Ic) (Max): 1 A (minimum requirement)
Voltage - Collector Emitter Breakdown (Max): 20 V (minimum requirement)
Vce Saturation (Max) @ Ib, Ic: 500mV @ 100mA, 1A (maximum allowable)
DC Current Gain (hFE) (Min) @ Ic, Vce: 85 @ 500mA, 1V (minimum requirement)
Mounting Type: Surface Mount (mandatory match)
Package / Case: TO-261-4, TO-261AA (mandatory match)
Supplier Device Package: SOT-223 or SOT-223-3 (compatible variants)

Parametric Equivalent Parts maintain identical electrical specifications and packaging format. These parts are direct functional replacements with no performance trade-offs.

Direct Manufacturer Parts are sourced from alternative manufacturers and meet all critical electrical parameters while maintaining package compatibility.

Similar Parts exceed minimum specifications in one or more parameters (such as maximum collector current, power dissipation, or transition frequency) and are suitable for applications where enhanced performance margins are beneficial.

Parameter Comparison

Parameter	BCP69,135	BCP69,115	BCP69T1G	DCP69-13	FZT948TA	NSVBCP69T1G
Manufacturer	Nexperia USA Inc.	Nexperia USA Inc.	onsemi	Diodes Incorporated	Diodes Incorporated	onsemi
Transistor Type	PNP	PNP	PNP	PNP	PNP	PNP
Current - Collector (Ic) (Max)	1 A	1 A	1 A	1 A	6 A	1 A
Voltage - Collector Emitter Breakdown (Max)	20 V	20 V	20 V	20 V	20 V	20 V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A	500mV @ 100mA, 1A	500mV @ 100mA, 1A	500mV @ 100mA, 1A	450mV @ 250mA, 6A	500mV @ 100mA, 1A
Current - Collector Cutoff (Max)	100nA	100nA	10µA	100nA	50nA	10µA
DC Current Gain (hFE) (Min) @ Ic, Vce	85 @ 500mA, 1V	85 @ 500mA, 1V	85 @ 500mA, 1V	85 @ 500mA, 1V	100 @ 1A, 1V	85 @ 500mA, 1V
Power - Max	1.4 W	1.4 W	1.5 W	1 W	3 W	1.5 W
Frequency - Transition	140 MHz	140 MHz	60 MHz	200 MHz	80 MHz	60 MHz
Operating Temperature (TJ)	150°C	150°C	-65°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 150°C	-65°C ~ 150°C
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA
Supplier Device Package	SOT-223	SOT-223	SOT-223 (TO-261)	SOT-223-3	SOT-223-3	SOT-223 (TO-261)
Packaging Format	Tape & Reel (TR)	Cut Tape (CT) & Digi-Reel®	Cut Tape (CT) & Digi-Reel®	Tape & Reel (TR)	Cut Tape (CT)	Tape & Reel (TR)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

BCP69,115 (Parametric Equivalent)

The BCP69,115 is a parametric equivalent manufactured by Nexperia USA Inc. with identical electrical specifications to the BCP69,135. The primary distinction is packaging format: BCP69,115 is supplied in Cut Tape (CT) & Digi-Reel® format, whereas BCP69,135 is supplied in Tape & Reel (TR) format. Both parts maintain AEC-Q100 automotive qualification and ROHS3 compliance. Selection between these parts is determined by supply chain requirements and reel format compatibility with assembly equipment.

BCP69T1G (Direct Manufacturer Alternative)

The BCP69T1G is manufactured by onsemi and meets all critical electrical parameters of the BCP69,135. This part offers an extended operating temperature range (-65°C to 150°C) compared to the BCP69,135 (0°C to 150°C implied by automotive grade specification). The BCP69T1G is supplied in Cut Tape (CT) & Digi-Reel® format. Transition frequency is reduced to 60 MHz compared to 140 MHz for the BCP69,135. This part is suitable for applications where lower frequency operation is acceptable and extended low-temperature performance is required.

DCP69-13 (Direct Manufacturer Alternative)

The DCP69-13 is manufactured by Diodes Incorporated and maintains all critical electrical parameters of the BCP69,135. This part features a higher transition frequency of 200 MHz and an extended operating temperature range (-55°C to 150°C). Maximum power dissipation is specified at 1 W, which is lower than the BCP69,135 at 1.4 W. The DCP69-13 is supplied in Tape & Reel (TR) format. This part is suitable for high-frequency applications where the reduced power rating does not constrain thermal design.

FZT948TA (Similar Performance Alternative)

The FZT948TA is manufactured by Diodes Incorporated and exceeds the BCP69,135 specifications in collector current (6 A versus 1 A) and power dissipation (3 W versus 1.4 W). This part is suitable for applications requiring higher current handling capability or enhanced thermal margin. The transition frequency is 80 MHz, which is lower than the BCP69,135. The FZT948TA is supplied in Cut Tape (CT) format and maintains AEC-Q100 qualification and ROHS3 compliance.

NSVBCP69T1G (Direct Manufacturer Alternative)

The NSVBCP69T1G is manufactured by onsemi and is electrically equivalent to the BCP69T1G. This part maintains all critical electrical parameters of the BCP69,135 with an extended operating temperature range (-65°C to 150°C). The NSVBCP69T1G is supplied in Tape & Reel (TR) format. Transition frequency is 60 MHz. This part is suitable for applications requiring tape and reel packaging with extended low-temperature performance.

Frequently Asked Questions (FAQ)

Q: Can BCP69,115 be used as a direct replacement for BCP69,135?

A: Yes. The BCP69,115 is a parametric equivalent with identical electrical specifications. The only difference is packaging format: BCP69,115 is supplied in Cut Tape (CT) & Digi-Reel® format while BCP69,135 is supplied in Tape & Reel (TR) format. Compatibility depends on assembly equipment capability to process the selected reel format.

Q: What is the difference between BCP69T1G and NSVBCP69T1G?

A: Both parts are manufactured by onsemi and are electrically identical. The primary difference is packaging format: BCP69T1G is supplied in Cut Tape (CT) & Digi-Reel® format, while NSVBCP69T1G is supplied in Tape & Reel (TR) format. Selection is determined by assembly equipment requirements.

Q: Can FZT948TA be used in place of BCP69,135?

A: FZT948TA exceeds the BCP69,135 specifications in collector current (6 A versus 1 A) and power dissipation (3 W versus 1.4 W). It is suitable for applications where higher current handling or thermal margin is beneficial. The transition frequency is lower (80 MHz versus 140 MHz). Electrical compatibility is maintained for all critical parameters at the 1 A operating point.

Q: Are all substitute parts AEC-Q100 qualified?

A: Yes. All substitute parts listed maintain AEC-Q100 automotive qualification and ROHS3 compliance, consistent with the BCP69,135 specification.

Q: What is the significance of the operating temperature range difference between BCP69,135 and BCP69T1G?

A: The BCP69,135 is specified for 150°C maximum junction temperature as an automotive-grade component. The BCP69T1G specifies an extended range of -65°C to 150°C. The extended low-temperature specification provides additional margin for applications operating in cold environments. Both parts maintain the same maximum junction temperature limit.

Q: Can DCP69-13 be used in high-power applications?

A: DCP69-13 is specified for 1 W maximum power dissipation, which is lower than BCP69,135 at 1.4 W. For applications requiring sustained power dissipation above 1 W, FZT948TA (3 W rating) is a more suitable alternative. DCP69-13 is appropriate for applications where power dissipation remains below 1 W.

Q: What packaging formats are available for these substitute parts?

A: Packaging formats include Tape & Reel (TR), Cut Tape (CT), and Digi-Reel® variants. BCP69,135 and DCP69-13 are supplied in Tape & Reel (TR) format. BCP69,115, BCP69T1G, and NSVBCP69T1G offer alternative formats. FZT948TA is supplied in Cut Tape (CT) format. Selection is determined by assembly equipment compatibility.

Q: Are all parts RoHS3 compliant?

A: Yes. All substitute parts listed are ROHS3 compliant and REACH unaffected, consistent with the BCP69,135 specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message