BCP69,115 Equivalent & Substitute Parts

Part Overview

The BCP69,115 is an active PNP bipolar junction transistor manufactured by Nexperia USA Inc., designed for surface mount applications in the SOT-223 package. This component operates at a maximum collector current of 1 A with a 20 V collector-emitter breakdown voltage and delivers 1.4 W maximum power dissipation. The device is qualified to AEC-Q100 automotive standards and maintains RoHS3 compliance with unlimited moisture sensitivity rating.

Equivalent and substitute parts are identified to address component availability, supply chain continuity, and design flexibility while maintaining electrical and mechanical compatibility within specified parameter ranges.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) Max	1	A
Voltage - Collector Emitter Breakdown (Max)	20	V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A	—
DC Current Gain (hFE) Min @ Ic, Vce	85 @ 500mA, 1V	—
Power - Max	1.4	W
Frequency - Transition	140	MHz
Operating Temperature (TJ)	150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-261-4, TO-261AA	—
Supplier Device Package	SOT-223	—
RoHS Status	ROHS3 Compliant	—
Grade	Automotive	—
Qualification	AEC-Q100	—

Substitute Part Grouping Explanation

Substitute parts for the BCP69,115 are classified into two categories based on electrical parameter alignment:

Direct Substitutes maintain identical or equivalent electrical specifications across all critical parameters: PNP transistor type, 1 A maximum collector current, 20 V collector-emitter breakdown voltage, 500 mV saturation voltage at specified bias conditions, 85 minimum DC current gain, and SOT-223 surface mount packaging. These parts satisfy pin-compatible replacement requirements without circuit redesign.

Similar Substitutes share the same transistor type, voltage rating, and package family but differ in one or more electrical parameters such as maximum collector current, power dissipation, or transition frequency. These parts are suitable for applications where the specified parameter differences do not conflict with circuit requirements.

Substitution eligibility is determined by the following criteria:

Transistor type: PNP
Collector-emitter breakdown voltage: 20 V (minimum requirement)
Saturation voltage: 500 mV @ 100 mA, 1 A (or lower)
DC current gain: 85 minimum @ 500 mA, 1 V (or higher)
Package: SOT-223 surface mount
RoHS3 compliance
Operating temperature range: 150°C maximum junction temperature

Parameter Comparison

Parameter	BCP69,115 (Nexperia)	BCP69T1G (onsemi)	DCP69-13 (Diodes Inc.)	NSVBCP69T1G (onsemi)	FZT948TA (Diodes Inc.)
Manufacturer	Nexperia USA Inc.	onsemi	Diodes Incorporated	onsemi	Diodes Incorporated
Transistor Type	PNP	PNP	PNP	PNP	PNP
Current - Collector (Ic) Max	1 A	1 A	1 A	1 A	6 A
Voltage - Collector Emitter Breakdown (Max)	20 V	20 V	20 V	20 V	20 V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A	500mV @ 100mA, 1A	500mV @ 100mA, 1A	500mV @ 100mA, 1A	450mV @ 250mA, 6A
DC Current Gain (hFE) Min @ Ic, Vce	85 @ 500mA, 1V	85 @ 500mA, 1V	85 @ 500mA, 1V	85 @ 500mA, 1V	100 @ 1A, 1V
Power - Max	1.4 W	1.5 W	1 W	1.5 W	3 W
Frequency - Transition	140 MHz	60 MHz	200 MHz	60 MHz	80 MHz
Operating Temperature (TJ)	150°C	-65°C ~ 150°C	-55°C ~ 150°C	-65°C ~ 150°C	-55°C ~ 150°C
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA	TO-261-4, TO-261AA
Supplier Device Package	SOT-223	SOT-223 (TO-261)	SOT-223-3	SOT-223 (TO-261)	SOT-223-3
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

Direct Substitutes (Pin-Compatible Replacement)

BCP69T1G (onsemi) and NSVBCP69T1G (onsemi) are direct electrical equivalents to the BCP69,115. Both parts maintain identical collector current (1 A), collector-emitter breakdown voltage (20 V), saturation voltage (500 mV @ 100 mA, 1 A), and DC current gain (85 @ 500 mA, 1 V) specifications. The primary differences are packaging format (Cut Tape vs. Tape & Reel) and extended operating temperature range (-65°C to 150°C vs. 150°C maximum). Both parts are active products with RoHS3 compliance and REACH unaffected status. BCP69T1G offers higher power dissipation (1.5 W vs. 1.4 W) and lower transition frequency (60 MHz vs. 140 MHz). NSVBCP69T1G provides identical electrical characteristics with Tape & Reel packaging.

DCP69-13 (Diodes Incorporated) is a direct electrical substitute with identical collector current, voltage rating, saturation voltage, and DC current gain. This part features higher transition frequency (200 MHz vs. 140 MHz) and lower maximum power dissipation (1 W vs. 1.4 W). The extended operating temperature range (-55°C to 150°C) and SOT-223-3 package variant provide additional design flexibility. DCP69-13 is an active product with full RoHS3 and REACH compliance.

Similar Substitute (Higher Current Capability)

FZT948TA (Diodes Incorporated) is a similar substitute suitable for applications requiring higher collector current capacity. This part maintains the 20 V collector-emitter breakdown voltage and SOT-223-3 package but provides 6 A maximum collector current (vs. 1 A), 3 W power dissipation (vs. 1.4 W), and 100 minimum DC current gain (vs. 85). The saturation voltage is lower at 450 mV @ 250 mA, 6 A. FZT948TA operates across -55°C to 150°C and is an active product with full compliance certifications. This part is suitable for circuits where the BCP69,115 current rating is insufficient but the voltage and package requirements remain constant.

All substitute parts maintain RoHS3 compliance, unlimited moisture sensitivity rating (MSL 1), and REACH unaffected status, ensuring regulatory alignment with the original component.

Frequently Asked Questions (FAQ)

Q: Can BCP69T1G replace BCP69,115 in all applications?

A: BCP69T1G is electrically equivalent to BCP69,115 across all critical parameters: 1 A collector current, 20 V breakdown voltage, 500 mV saturation voltage, and 85 minimum DC current gain. The primary differences are packaging format (Cut Tape vs. Tape & Reel) and extended temperature range. BCP69T1G is suitable for direct replacement in circuits operating within the specified electrical parameters.

Q: What is the difference between DCP69-13 and BCP69,115?

A: DCP69-13 maintains electrical equivalence in collector current (1 A), voltage rating (20 V), saturation voltage (500 mV), and DC current gain (85). The key differences are transition frequency (200 MHz vs. 140 MHz), maximum power dissipation (1 W vs. 1.4 W), and package variant (SOT-223-3 vs. SOT-223). DCP69-13 is suitable for replacement in applications where the lower power rating does not conflict with circuit requirements.

Q: When should FZT948TA be used instead of BCP69,115?

A: FZT948TA is a similar substitute for applications requiring higher collector current capacity. This part provides 6 A maximum current versus 1 A in the BCP69,115, with corresponding increases in power dissipation (3 W vs. 1.4 W). FZT948TA maintains the 20 V voltage rating and SOT-223-3 package. Use FZT948TA only when circuit requirements exceed the 1 A current specification of the BCP69,115.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. BCP69T1G, DCP69-13, NSVBCP69T1G, and FZT948TA are all RoHS3 compliant with unlimited moisture sensitivity rating (MSL 1) and REACH unaffected status, matching the regulatory compliance of the BCP69,115.

Q: What is the difference between SOT-223 and SOT-223-3 packages?

A: Both SOT-223 and SOT-223-3 are surface mount packages with TO-261-4 and TO-261AA case designations. The primary distinction is internal pin configuration and supplier designation. All substitute parts listed maintain mechanical compatibility with the BCP69,115 in SOT-223 surface mount applications.

Q: Does NSVBCP69T1G differ from BCP69T1G?

A: NSVBCP69T1G and BCP69T1G are electrically identical, both manufactured by onsemi with 1 A collector current, 20 V breakdown voltage, 500 mV saturation voltage, and 85 minimum DC current gain. The primary difference is packaging format: NSVBCP69T1G is supplied in Tape & Reel format, while BCP69T1G is available in Cut Tape format. Both are suitable for direct replacement.

Q: Can BCP69,115 be used in automotive applications?

A: Yes. BCP69,115 is qualified to AEC-Q100 automotive standards and maintains active product status. All listed substitute parts (BCP69T1G, DCP69-13, NSVBCP69T1G, and FZT948TA) are also active products with full RoHS3 compliance, supporting automotive design requirements.

Q: What is the maximum operating temperature for each substitute?

A: BCP69,115 operates to 150°C junction temperature. BCP69T1G and NSVBCP69T1G extend to -65°C to 150°C. DCP69-13 and FZT948TA operate across -55°C to 150°C. All parts meet or exceed the 150°C maximum specification of the original component.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message