BCP5410TA Equivalent & Substitute Parts

Part Overview

The BCP5410TA is an NPN bipolar junction transistor manufactured by Diodes Incorporated, designed for general-purpose switching and amplification applications. This surface mount device operates at 45 V collector-emitter breakdown voltage with a maximum collector current of 1 A and 2 W power dissipation capability. The part is currently in active production status with 2200 units available in inventory.

Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when design specifications allow for compatible alternatives from different manufacturers. This reference provides engineering-validated substitutes based on electrical and mechanical parameter compatibility.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN	—
Voltage - Collector Emitter Breakdown (Max)	45	V
Current - Collector (Ic) (Max)	1	A
Power - Max	2	W
Frequency - Transition	150	MHz
Vce Saturation (Max) @ Ib, Ic	500 mV @ 50 mA, 500 mA	—
DC Current Gain (hFE) (Min) @ Ic, Vce	63 @ 150 mA, 2 V	—
Current - Collector Cutoff (Max)	100	nA
Operating Temperature Range	-65 to 150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-261-4, TO-261AA	—
Supplier Device Package	SOT-223-3	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the BCP5410TA are classified based on the following critical parameters that determine functional compatibility:

Primary Compatibility Criteria:

Transistor Type: NPN
Voltage - Collector Emitter Breakdown (Max): 45 V or greater
Current - Collector (Ic) (Max): 1 A or greater
Vce Saturation (Max) @ Ib, Ic: 500 mV @ 50 mA, 500 mA
Current - Collector Cutoff (Max): 100 nA (ICBO)
Operating Temperature (Max): 150°C or greater
Mounting Type: Surface Mount
Package / Case: TO-261-4, TO-261AA compatible
RoHS Status: ROHS3 Compliant

Secondary Considerations:

Power dissipation capability (960 mW to 2 W acceptable)
Frequency - Transition (100 MHz to 180 MHz acceptable)
DC Current Gain (hFE) (40 to 100 @ 150 mA, 2 V acceptable)

Substitutes are grouped into three categories: Nexperia USA Inc. direct equivalents with SOT-223 packaging, Infineon Technologies alternatives with PG-SOT223-4 packaging variants, and higher voltage rated alternatives (BCP55 series at 60 V) for applications requiring additional voltage margin.

Parameter Comparison

Part Number	Manufacturer	Ic (Max)	Vce Breakdown (Max)	Power (Max)	Frequency (Transition)	hFE (Min) @ 150mA, 2V	Package	Product Status
BCP5410TA	Diodes Incorporated	1 A	45 V	2 W	150 MHz	63	SOT-223-3	Active
BCP54,115	Nexperia USA Inc.	1 A	45 V	960 mW	180 MHz	63	SOT-223	Active
BCP54-10,135	Nexperia USA Inc.	1 A	45 V	650 mW	180 MHz	63	SOT-223	Active
BCP54,135	Nexperia USA Inc.	1 A	45 V	960 mW	180 MHz	63	SOT-223	Active
BCP54-16,115	Nexperia USA Inc.	1 A	45 V	960 mW	180 MHz	100	SOT-223	Active
BCP5416H6327XTSA1	Infineon Technologies	1 A	45 V	2 W	100 MHz	100	PG-SOT223-4-10	Last Time Buy
BCP5416H6433XTMA1	Infineon Technologies	1 A	45 V	2 W	100 MHz	100	PG-SOT223-4	Last Time Buy
BCP54H6327XTSA1	Infineon Technologies	1 A	45 V	2 W	100 MHz	40	PG-SOT223-4-10	Last Time Buy
BCP55,115	Nexperia USA Inc.	1 A	60 V	1.35 W	180 MHz	63	SOT-223	Active
BCP55,135	Nexperia USA Inc.	1 A	60 V	1.35 W	180 MHz	63	SOT-223	Active
BCP55-10,115	Nexperia USA Inc.	1 A	60 V	1.35 W	180 MHz	63	SOT-223	Active

Engineering Selection Recommendations

Nexperia BCP54 Series (45 V Rating) - Primary Substitutes

The Nexperia BCP54,115, BCP54,135, BCP54-10,135, and BCP54-16,115 parts provide direct electrical equivalence to the BCP5410TA with identical voltage and current ratings. All Nexperia substitutes maintain active product status and ROHS3 compliance. The BCP54,115 and BCP54,135 offer higher transition frequency (180 MHz versus 150 MHz) and are available in higher inventory quantities (3568 and 4777 units respectively). The BCP54-16,115 variant provides increased DC current gain (hFE minimum of 100) and is available in Cut Tape and Digi-Reel packaging with 33,330 units in stock. Power dissipation ranges from 650 mW to 960 mW across these variants, which is acceptable for applications not requiring the full 2 W capability of the original part.

Infineon BCP54 Series (45 V Rating) - Alternative Substitutes

The Infineon parts BCP5416H6327XTSA1, BCP5416H6433XTMA1, and BCP54H6327XTSA1 maintain the 45 V voltage rating and 1 A current rating with 2 W power dissipation matching the BCP5410TA. These parts feature PG-SOT223-4 packaging variants and are designated as Last Time Buy status. Transition frequency is 100 MHz, which is lower than the original part. Inventory availability is limited (858 to 1088 units). These parts are suitable for applications where the lower frequency specification is acceptable and where the 2 W power rating is required.

Nexperia BCP55 Series (60 V Rating) - Higher Voltage Alternatives

The BCP55,115, BCP55,135, and BCP55-10,115 parts provide a 60 V collector-emitter breakdown voltage rating, exceeding the 45 V specification of the BCP5410TA. These parts maintain 1 A maximum collector current and are suitable for applications requiring additional voltage margin. Power dissipation is 1.35 W, which is lower than the original 2 W specification. All BCP55 variants are in active production status with inventory availability ranging from 1886 to 29,795 units. Transition frequency is 180 MHz.

Packaging Considerations

The BCP5410TA uses SOT-223-3 packaging. Nexperia substitutes use standard SOT-223 packaging, which is mechanically and electrically compatible. Infineon substitutes use PG-SOT223-4 packaging variants, which differ in pin configuration and require PCB layout verification before implementation.

Frequently Asked Questions (FAQ)

Q: Can BCP54,115 directly replace BCP5410TA in all applications?

A: BCP54,115 is electrically compatible with BCP5410TA for applications where power dissipation does not exceed 960 mW. Both parts share identical voltage (45 V), current (1 A), and saturation specifications. The primary difference is power rating (960 mW versus 2 W) and transition frequency (180 MHz versus 150 MHz). Applications requiring the full 2 W power capability should use Infineon alternatives or verify thermal performance with the reduced power rating.

Q: What is the difference between BCP54-10,135 and BCP54,115?

A: BCP54-10,135 is qualified to AEC-Q100 automotive standards and is designated for automotive applications. Power dissipation is 650 mW compared to 960 mW for BCP54,115. Both parts share identical electrical specifications for voltage, current, and saturation characteristics. Selection depends on application requirements and automotive qualification necessity.

Q: Are Infineon BCP54 parts suitable replacements despite Last Time Buy status?

A: Infineon BCP54 parts (BCP5416H6327XTSA1, BCP5416H6433XTMA1, BCP54H6327XTSA1) are electrically compatible with BCP5410TA and maintain 2 W power dissipation. However, Last Time Buy status indicates these parts are being discontinued. Inventory is limited (858 to 1088 units). These parts are suitable for immediate replacement needs but should not be selected for new long-term production designs. Nexperia BCP54 or BCP55 series are recommended for new designs.

Q: When should BCP55 series be selected instead of BCP54 series?

A: BCP55 series (60 V rating) should be selected when the application requires voltage margin above 45 V or when operating in environments with potential voltage transients. BCP55 parts are suitable for applications where the 1.35 W power dissipation is sufficient. All BCP55 variants are in active production status with strong inventory availability, making them suitable for long-term production designs.

Q: Is SOT-223 packaging compatible with SOT-223-3 PCB layouts?

A: SOT-223 and SOT-223-3 are mechanically compatible package types with identical pin spacing and footprints. Nexperia SOT-223 substitutes can be used on PCB layouts designed for SOT-223-3. However, Infineon PG-SOT223-4 packaging variants have different pin configurations and require PCB layout verification before implementation.

Q: What is the significance of DC Current Gain (hFE) variation across substitutes?

A: DC Current Gain (hFE) ranges from 40 to 100 across available substitutes. The BCP5410TA specifies minimum hFE of 63 at 150 mA and 2 V. Substitutes with higher hFE (100) provide improved current amplification characteristics. Substitutes with lower hFE (40) require higher base current for equivalent collector current. Application circuit design should account for hFE variation when base drive calculations are critical.

Q: Are all substitutes ROHS3 compliant?

A: All substitute parts listed are ROHS3 compliant and REACH unaffected, matching the environmental compliance status of the BCP5410TA. All parts are suitable for applications with environmental compliance requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message