BCP5316TC Equivalent & Substitute Parts

Part Overview

The BCP5316TC is a PNP medium-power bipolar junction transistor manufactured by Diodes Incorporated, designed for surface mount applications in the SOT-223 package. This device operates at 80 V collector-emitter breakdown voltage with a maximum collector current of 1 A and 2 W power dissipation capability. The transistor is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating.

Equivalent and substitute parts are necessary when the primary BCP5316TC becomes unavailable, when alternative manufacturers are required for supply chain diversification, or when design specifications permit operation within the electrical and mechanical parameters of functionally compatible devices.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Collector Current (Max)	1	A
Collector-Emitter Breakdown Voltage (Max)	80	V
Vce Saturation (Max)	500	mV @ 50mA, 500mA
DC Current Gain (hFE Min)	100	@ 150mA, 2V
Power Dissipation (Max)	2	W
Transition Frequency	150	MHz
Operating Temperature Range	-65 to 150	°C (TJ)
Package Type	SOT-223	Surface Mount
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the BCP5316TC is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Parameters:

Transistor Type: PNP
Collector-Emitter Breakdown Voltage: 80 V (maximum)
Collector Current: 1 A (maximum)
Vce Saturation: 500 mV @ 50mA, 500mA
Package/Case: TO-261-4, TO-261AA (SOT-223 form factor)
Mounting Type: Surface Mount
DC Current Gain (hFE): Minimum 100 @ 150mA, 2V
RoHS3 Compliance: Required

Allowable Variation Parameters:

Power Dissipation: May exceed 2 W (higher power rating acceptable)
Transition Frequency: May differ from 150 MHz (frequency variation acceptable)
Operating Temperature Maximum: May exceed 150°C (higher temperature rating acceptable)
Manufacturer: Multiple manufacturers permitted
Product Status: Active or Last Time Buy acceptable

Substitute parts listed below meet all mandatory equivalence parameters and are therefore electrically and mechanically interchangeable with the BCP5316TC in standard applications.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) A	Vce(br) V	hFE (Min)	Power W	Freq MHz	Temp °C	Package	Status
BCP5316TC	Diodes Inc.	1	80	100	2	150	-65 to 150	SOT-223	Active
BCP5316H6433XTMA1	Infineon	1	80	100	2	125	-65 to 150	SOT-223	Last Time Buy
BCP53,115	Nexperia USA	1	80	63	1	145	-65 to 150	SOT-223	Active
BCP53-10,115	Nexperia USA	1	80	63	1	145	-65 to 150	SOT-223	Active
BCP53-10TX	Nexperia USA	1	80	63	1.35	145	-65 to 150	SOT-223	Active
BCP53-16	STMicroelectronics	1	80	100	1.6	50	-65 to 150	SOT-223	Active
BCP53-16,115	Nexperia USA	1	80	100	1	145	-65 to 150	SOT-223	Active
BCP53-16,135	Nexperia USA	1	80	100	1	145	-65 to 150	SOT-223	Active
BCP53-16HX	Nexperia USA	1	80	100	2.2	100	-65 to 175	SOT-223	Active
BCP53-16T1G	onsemi	1.5	80	100	1.5	50	-65 to 150	SOT-223	Active
BCP53-16T3G	onsemi	1.5	80	100	1.5	50	-65 to 150	SOT-223	Active

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

BCP5316H6433XTMA1 (Infineon Technologies) and BCP53-16 (STMicroelectronics) provide direct electrical equivalence to the BCP5316TC. Both devices maintain identical collector current, breakdown voltage, saturation voltage, and current gain specifications. The Infineon part carries Last Time Buy status, indicating limited future availability. The STMicroelectronics BCP53-16 maintains Active product status with substantial inventory (126,105 units) and is suitable for new designs and ongoing production.

Secondary Substitutes (Acceptable with Design Verification):

BCP53-16,115 and BCP53-16,135 (Nexperia USA Inc.) are automotive-qualified devices (AEC-Q100) with Active status. These parts meet all mandatory electrical parameters but operate at reduced power dissipation (1 W versus 2 W). Selection is appropriate for applications where thermal margins permit lower power ratings.

BCP53-16HX (Nexperia USA Inc.) offers enhanced thermal performance with 2.2 W power dissipation and extended operating temperature to 175°C, with AEC-Q101 automotive qualification. This variant is suitable for high-temperature or thermally demanding applications.

Alternative Substitutes (Acceptable with Current Derating):

BCP53,115 and BCP53-10,115 (Nexperia USA Inc.) are automotive-qualified (AEC-Q100) with Active status. These devices exhibit lower DC current gain (hFE minimum 63 versus 100), requiring circuit design verification to confirm adequate base drive and switching performance.

BCP53-10TX (Nexperia USA Inc.) provides automotive qualification (AEC-Q101) with intermediate power rating (1.35 W) and acceptable current gain characteristics.

Higher Current Alternatives:

BCP53-16T1G and BCP53-16T3G (onsemi) support elevated collector current (1.5 A maximum) while maintaining 80 V breakdown voltage and 100 hFE minimum gain. These devices are suitable for applications requiring higher current capacity within the same voltage and package constraints.

All listed substitutes maintain RoHS3 compliance, unlimited moisture sensitivity rating (MSL 1), and SOT-223 surface mount packaging identical to the BCP5316TC.

Frequently Asked Questions (FAQ)

Q: Can BCP53-16T1G and BCP53-16T3G be used as direct replacements for BCP5316TC?

A: Yes. Both devices meet all mandatory equivalence parameters: 1 A minimum collector current rating (with 1.5 A maximum capability), 80 V breakdown voltage, 500 mV saturation voltage, 100 hFE minimum, and SOT-223 package. The higher current rating does not prevent substitution in applications designed for 1 A operation.

Q: Why do some substitutes show lower DC current gain (hFE = 63 versus 100)?

A: DC current gain variation is an allowable parameter difference among substitute parts. Devices with hFE minimum of 63 (such as BCP53,115 and BCP53-10,115) require circuit design verification to confirm adequate base drive current for intended switching or amplification applications. Applications with sufficient base drive margin accommodate this variation.

Q: What is the significance of automotive qualification (AEC-Q100 and AEC-Q101)?

A: Automotive qualification indicates the device has undergone enhanced reliability testing per automotive industry standards. AEC-Q100 and AEC-Q101 qualified parts are suitable for automotive and high-reliability applications. Non-qualified parts (such as BCP5316TC and BCP53-16) are suitable for general industrial and consumer applications.

Q: Are all substitute parts available in the same packaging options as BCP5316TC?

A: All listed substitutes use SOT-223 surface mount packaging (TO-261-4, TO-261AA case designation). Packaging form factor and pin configuration are identical across all listed parts. Tape & Reel and Cut Tape packaging options vary by manufacturer and part number; verify specific packaging availability with supplier documentation.

Q: Can BCP53-16,115 and BCP53-16,135 be used in applications requiring 2 W power dissipation?

A: These parts are rated for 1 W maximum power dissipation, compared to 2 W for BCP5316TC. Substitution is acceptable only in applications where actual power dissipation remains below 1 W. Applications requiring sustained 2 W operation require selection of higher-power alternatives such as BCP53-16HX (2.2 W) or BCP5316H6433XTMA1 (2 W).

Q: What is the difference between BCP53-16T1G and BCP53-16T3G?

A: Both devices are electrically identical with 1.5 A collector current, 80 V breakdown voltage, 100 hFE minimum, and 1.5 W power dissipation. The designations T1G and T3G represent different manufacturing date codes or tape reel configurations. Electrical performance and substitution capability are equivalent.

Q: Is BCP5316H6433XTMA1 recommended for new designs?

A: BCP5316H6433XTMA1 carries Last Time Buy product status, indicating the manufacturer has announced end-of-life production. This part is suitable for sustaining production of existing designs but is not recommended for new product development. Active-status alternatives such as BCP53-16 (STMicroelectronics) or BCP53-16HX (Nexperia) are preferred for new designs.

Q: Do all substitutes maintain the same operating temperature range as BCP5316TC?

A: Most substitutes operate from -65°C to 150°C, matching BCP5316TC specifications. BCP53-16HX extends the maximum operating temperature to 175°C. Substitutes with identical or extended temperature ranges are fully compatible. Verify application temperature requirements before selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message