BC95GJB-02-STD Equivalent & Substitute Parts

Part Overview

The BC95GJB-02-STD is a cellular GPRS, GSM, and LTE transceiver module manufactured by Quectel, designed for surface mount applications. This module operates across multiple frequency bands including 700MHz, 800MHz, 850MHz, 900MHz, 1.8GHz, and 2.1GHz, with an antenna not included in the package. The BC95GJB-02-STD is classified as obsolete, which necessitates identification of active equivalent alternatives for new designs and ongoing production requirements. Substitute parts must maintain electrical compatibility across RF protocols, frequency bands, power specifications, and serial interface requirements.

Substiute Parts

BC95GJB-02-STD

QuectelIn Stock: 819BC95GJB-02-STD Datasheet

Current PartRFQ

BC95GVBA-I01-CNASA

QuectelIn Stock: 734BC95GVBA-I01-CNASA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BC95GJB-02-STD is determined by strict equivalence across the following critical parameters:

RF and Protocol Compatibility: The substitute part must support identical cellular protocols (GPRS, GSM, LTE) and operate across the same frequency bands (700MHz, 800MHz, 850MHz, 900MHz, 1.8GHz, 2.1GHz).

Electrical Performance: Power output (23dBm), receiver sensitivity (-129dBm), and data rate (150kbps) must be identical to ensure functional equivalence in RF transceiver applications.

Power and Current Specifications: Supply voltage range (3.1V ~ 4.2V), receiving current (60mA), and transmitting current (70mA ~ 280mA) must match to ensure compatibility with existing power delivery and thermal management designs.

Interface and Mechanical Requirements: Serial interfaces (ADC, UART), mounting type (Surface Mount), operating temperature range (-35°C ~ 75°C), and package classification (Module) must remain consistent.

Compliance and Reliability: RoHS compliance status and moisture sensitivity level (MSL 3, 168 Hours) must be maintained or improved to ensure regulatory and environmental compatibility.

The BC95GJB-02-STD is obsolete; therefore, substitute parts must be in active product status to ensure long-term availability and manufacturer support.

Parameter Comparison

Engineering Selection Recommendations

The BC95GVBA-I01-CNASA is a direct electrical and mechanical equivalent to the BC95GJB-02-STD. All critical RF, power, interface, and thermal parameters are identical across both parts. The primary distinction is product status: the BC95GJB-02-STD is obsolete, while the BC95GVBA-I01-CNASA is active.

For new designs and production continuity, the BC95GVBA-I01-CNASA is the appropriate selection. This substitute maintains full compatibility with existing circuit designs, PCB layouts, and firmware implementations developed for the BC95GJB-02-STD.

The BC95GVBA-I01-CNASA carries ROHS3 compliance, which represents an enhanced regulatory status compared to the RoHS compliance of the original part. Both parts maintain identical moisture sensitivity levels and are packaged in Tape & Reel format suitable for automated assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the BC95GVBA-I01-CNASA be used as a direct replacement for the BC95GJB-02-STD in existing designs?

A: Yes. The BC95GVBA-I01-CNASA is electrically and mechanically equivalent to the BC95GJB-02-STD. All RF protocols, frequency bands, power specifications, serial interfaces, and thermal characteristics are identical. No circuit modifications are required.

Q: What is the primary reason for substitution?

A: The BC95GJB-02-STD is classified as obsolete. The BC95GVBA-I01-CNASA is an active product with ongoing manufacturer support and availability, ensuring long-term supply chain reliability.

Q: Are the antenna requirements the same between both parts?

A: Both the BC95GJB-02-STD and BC95GVBA-I01-CNASA are supplied without integrated antennas. External antenna selection and integration requirements remain identical for both parts.

Q: Do the packaging formats differ between these parts?

A: No. Both parts are supplied in Tape & Reel (TR) packaging, suitable for automated surface mount assembly processes.

Q: Is there a difference in RoHS compliance between the two parts?

A: The BC95GJB-02-STD carries RoHS compliance, while the BC95GVBA-I01-CNASA carries ROHS3 compliance. ROHS3 represents an updated regulatory standard. Both parts meet environmental and hazardous substance restrictions.

Q: Are the power supply and current requirements identical?

A: Yes. Both parts operate at 3.1V to 4.2V supply voltage, draw 60mA during receiving, and draw 70mA to 280mA during transmitting. Power delivery and thermal management designs require no modification.

Q: What is the moisture sensitivity level for both parts?

A: Both parts are classified as MSL 3 with a 168-hour floor life. Identical moisture control and storage procedures apply to both components.