BC869TA Equivalent & Substitute Parts

Part Overview

The BC869TA is a PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 20V collector-emitter breakdown voltage and 1A maximum collector current in a surface mount SOT-89-3 package. This component is classified as obsolete, which necessitates identification of equivalent and substitute parts for ongoing design requirements and production continuity. Active alternatives with compatible or enhanced electrical characteristics are available from manufacturers including Nexperia USA Inc. and Infineon Technologies.

Key Parameters

Parameter	BC869TA Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) Max	1	A
Voltage - Collector Emitter Breakdown (Max)	20	V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 1A	—
DC Current Gain (hFE) Min @ Ic, Vce	85 @ 500mA, 1V	—
Power - Max	1	W
Frequency - Transition	60	MHz
Operating Temperature	-65 to 150	°C (TJ)
Mounting Type	Surface Mount	—
Package / Case	TO-243AA	—
Supplier Device Package	SOT-89-3	—
Product Status	Obsolete	—
RoHS Status	RoHS non-compliant	—

Substitute Part Grouping Explanation

Substitution of the BC869TA is determined by the following critical electrical and mechanical parameters:

Primary Compatibility Criteria:

Transistor type: PNP
Collector-emitter breakdown voltage: 20V (minimum requirement)
Package / Case: TO-243AA (mechanical compatibility)
Supplier device package: SOT-89 or SOT-89-3 (pin configuration compatibility)
Mounting type: Surface Mount

Secondary Compatibility Criteria:

Maximum collector current: 1A or greater
DC current gain (hFE): 85 or greater at specified test conditions
Vce saturation: 500mV or lower at rated conditions
Operating temperature range: minimum -65°C to 150°C or compatible subset

Substitute parts are grouped into two categories:

Category 1: Direct Electrical Equivalents (1A Collector Current) BC869,115 and BC869,135 from Nexperia USA Inc. maintain identical electrical specifications to the BC869TA while offering active product status, RoHS3 compliance, and enhanced transition frequency (140MHz vs. 60MHz). These parts are functionally interchangeable for applications requiring 1A maximum collector current.

Category 2: Higher Current Capability Substitutes BC869-25,115 (2A), PBSS5320X,135 (3A), and PBSS5520X,135 (5A) provide increased collector current ratings while maintaining 20V breakdown voltage and SOT-89 package compatibility. These parts are suitable for applications where the original 1A specification is conservative or where future design margin is required.

Category 3: Legacy Automotive-Qualified Alternative BCX6925H6327XTSA1 from Infineon Technologies offers automotive-grade qualification (AEC-Q101) with enhanced power dissipation (3W) but is classified as obsolete.

Parameter Comparison

Parameter	BC869TA	BC869,115	BC869,135	BC869-25,115	BCX6925H6327XTSA1	PBSS5320X,135	PBSS5520X,135
Manufacturer	Diodes Inc.	Nexperia USA Inc.	Nexperia USA Inc.	Nexperia USA Inc.	Infineon Tech.	Nexperia USA Inc.	Nexperia USA Inc.
Transistor Type	PNP	PNP	PNP	PNP	PNP	PNP	PNP
Ic (Max)	1 A	1 A	1 A	2 A	1 A	3 A	5 A
Vce Breakdown (Max)	20 V	20 V	20 V	20 V	20 V	20 V	20 V
Vce Saturation (Max)	500mV @ 100mA, 1A	500mV @ 100mA, 1A	500mV @ 100mA, 1A	600mV @ 200mA, 2A	500mV @ 100mA, 1A	300mV @ 300mA, 3A	270mV @ 500mA, 5A
hFE (Min)	85 @ 500mA, 1V	85 @ 500mA, 1V	85 @ 500mA, 1V	160 @ 500mA, 1V	160 @ 500mA, 1V	150 @ 2A, 2V	250 @ 2A, 2V
Power (Max)	1 W	1.2 W	1.2 W	500 mW	3 W	1.6 W	1.6 W
Frequency - Transition	60 MHz	140 MHz	140 MHz	140 MHz	100 MHz	100 MHz	100 MHz
Operating Temperature	-65 to 150°C	150°C	150°C	150°C	150°C	150°C	150°C
Package / Case	TO-243AA	TO-243AA	TO-243AA	TO-243AA	TO-243AA	TO-243AA	TO-243AA
Supplier Device Package	SOT-89-3	SOT-89	SOT-89	SOT-89	PG-SOT89	SOT-89	SOT-89
Product Status	Obsolete	Active	Active	Active	Obsolete	Active	Active
RoHS Status	Non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Automotive Grade	—	Yes (AEC-Q100)	Yes (AEC-Q100)	Yes (AEC-Q100)	Yes (AEC-Q101)	Yes (AEC-Q100)	Yes (AEC-Q100)
Inventory Status	765 Pcs	3100 Pcs	1073 Pcs	3219 Pcs	1051 Pcs	9044 Pcs	2735 Pcs

Engineering Selection Recommendations

For Direct Replacement (1A Applications): BC869,115 and BC869,135 from Nexperia USA Inc. are the primary recommended substitutes. Both parts maintain electrical equivalence to the BC869TA while offering active product status, ensuring long-term availability and supply chain stability. Both variants are RoHS3 compliant and AEC-Q100 qualified for automotive applications. The transition frequency improvement (140MHz vs. 60MHz) provides enhanced performance margin without affecting circuit compatibility. Packaging is SOT-89, which is mechanically compatible with SOT-89-3 footprints.

For Applications Requiring Higher Current Capacity: BC869-25,115 (2A), PBSS5320X,135 (3A), and PBSS5520X,135 (5A) are suitable when design requirements exceed 1A collector current or when additional design margin is required. All three parts maintain 20V breakdown voltage and SOT-89 package compatibility. PBSS5520X,135 offers the highest current capability (5A) with superior saturation characteristics (270mV at 5A). All three are active products with RoHS3 compliance and AEC-Q100 qualification.

For Automotive Applications with Enhanced Power Dissipation: BCX6925H6327XTSA1 from Infineon Technologies provides 3W power dissipation and AEC-Q101 qualification but is classified as obsolete. This part is not recommended for new designs due to product status.

Compliance Considerations: All recommended active substitutes (BC869,115, BC869,135, BC869-25,115, PBSS5320X,135, PBSS5520X,135) are RoHS3 compliant, addressing the non-compliance status of the original BC869TA. All recommended parts are AEC-Q100 qualified, suitable for automotive and industrial applications.

Frequently Asked Questions (FAQ)

Q: Can BC869,115 and BC869,135 be used interchangeably with BC869TA? A: Yes. Both parts maintain identical electrical specifications (1A collector current, 20V breakdown voltage, 500mV saturation voltage, 85 minimum hFE) and are packaged in SOT-89, which is mechanically compatible with the original SOT-89-3 package. Both are active products with RoHS3 compliance.

Q: What is the difference between BC869,115 and BC869,135? A: Both parts are electrically identical and manufactured by Nexperia USA Inc. The suffix designations (115 and 135) indicate different packaging or tape reel configurations. Electrical performance and pin configuration are equivalent.

Q: Can I use PBSS5320X,135 or PBSS5520X,135 as direct replacements? A: These parts are suitable substitutes only if the application circuit can accommodate higher collector current ratings (3A and 5A respectively). The 20V breakdown voltage and SOT-89 package are compatible. However, circuit behavior may differ due to higher current gain (hFE) and lower saturation voltage. Circuit validation is required for applications where these parameters affect performance.

Q: Is the BC869-25,115 a suitable substitute? A: BC869-25,115 is suitable for applications where 2A collector current is acceptable. It maintains 20V breakdown voltage and SOT-89 package compatibility. The higher current gain (160 vs. 85) and increased power dissipation (500mW vs. 1W) must be evaluated for circuit compatibility.

Q: What is the difference between SOT-89 and SOT-89-3 packages? A: Both designations refer to the same three-pin surface mount package with identical pin configuration and footprint. SOT-89-3 is a more specific designation. Parts specified as SOT-89 are mechanically and electrically compatible with SOT-89-3 footprints.

Q: Are all recommended substitutes RoHS compliant? A: Yes. All active substitute parts (BC869,115, BC869,135, BC869-25,115, PBSS5320X,135, PBSS5520X,135) are RoHS3 compliant, addressing the non-compliance status of the obsolete BC869TA.

Q: Which substitute offers the best long-term availability? A: PBSS5320X,135 and PBSS5520X,135 show the highest current inventory levels (9044 and 2735 units respectively) and are active products. BC869-25,115 also shows strong inventory (3219 units). All three are recommended for new designs requiring long-term supply assurance.

Q: Can BCX6925H6327XTSA1 be used as a substitute? A: BCX6925H6327XTSA1 is electrically compatible but is classified as obsolete. It is not recommended for new designs due to product status and potential future supply discontinuation.

Q: What are the key parameters that determine substitutability? A: The critical parameters are transistor type (PNP), collector-emitter breakdown voltage (20V minimum), maximum collector current (1A or greater), package type (TO-243AA / SOT-89), and saturation voltage characteristics. All recommended substitutes meet or exceed these requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message