BC856B-HF Equivalent & Substitute Parts Reference

Part Overview

The BC856B-HF is a PNP bipolar junction transistor manufactured by Comchip Technology, designed for general-purpose switching and amplification applications. This surface mount device operates at 65 V collector-emitter breakdown voltage with a maximum collector current of 100 mA and 250 mW power dissipation. The part is currently active in production with RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific requirements across multiple manufacturers including Nexperia, NXP, Taiwan Semiconductor Corporation, and onsemi.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Collector Current (Max)	100	mA
Collector-Emitter Breakdown Voltage (Max)	65	V
Vce Saturation (Max)	650	mV @ 5mA, 100mA
Collector Cutoff Current (Max)	15	nA
DC Current Gain (hFE Min)	220	@ 2.2mA, 5V
Power Dissipation (Max)	250	mW
Transition Frequency	100	MHz
Operating Temperature Range	-65 to 150	°C
Package	SOT-23-3 (TO-236-3, SC-59)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution eligibility for the BC856B-HF is determined by strict electrical and mechanical parameter matching. All substitute parts must satisfy the following criteria:

Critical Matching Parameters:

Transistor type: PNP
Collector current rating: 100 mA (maximum)
Collector-emitter breakdown voltage: 65 V (maximum)
Vce saturation: 650 mV @ 5mA, 100mA
Collector cutoff current: 15 nA (maximum)
Power dissipation: 250 mW or greater
Transition frequency: 100 MHz (minimum)
Package: SOT-23-3 / TO-236-3 / SC-59 surface mount
Mounting type: Surface mount

Acceptable Parameter Variations:

DC current gain (hFE): 125 or 220 @ 2mA, 5V (both acceptable)
Operating temperature range: -55°C to 150°C or -65°C to 150°C (both acceptable)
Collector cutoff current: 15 nA or 100 nA (both acceptable)
Power dissipation: 200 mW, 250 mW, or 300 mW (all acceptable)

All identified substitute parts meet these criteria and are functionally interchangeable within the specified electrical and mechanical constraints.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Ic (Max) mA	Vce(br) V	hFE (Min)	Power mW	Freq MHz	Temp °C	Package	Automotive Grade
BC856B-HF	Comchip Technology	100	65	220	250	100	-65 to 150	SOT-23-3	No
BC856B,215	Nexperia USA Inc.	100	65	220	250	100	-55 to 150	TO-236AB	Yes (AEC-Q101)
BC856B,235	NXP USA Inc.	100	65	220	250	100	-55 to 150	SOT-23	Yes (AEC-Q101)
BC856A RFG	Taiwan Semiconductor Corporation	100	65	125	200	100	-55 to 150	SOT-23	No
BC856ALT1G	onsemi	100	65	125	300	100	-55 to 150	SOT-23-3	No
BC856B RFG	Taiwan Semiconductor Corporation	100	65	220	200	100	-55 to 150	SOT-23	No
SBC856BLT1G	onsemi	100	65	220	300	100	-55 to 150	SOT-23-3	Yes (AEC-Q101)
SBC856BLT3G	onsemi	100	65	220	300	100	-55 to 150	SOT-23-3	Yes (AEC-Q101)

Engineering Selection Recommendations

Direct Equivalents (Highest Compatibility):

BC856B,215 (Nexperia USA Inc.) and BC856B,235 (NXP USA Inc.) are direct electrical equivalents with identical DC current gain specifications (hFE 220 @ 2mA, 5V) and power ratings (250 mW). Both parts carry AEC-Q101 automotive qualification and RoHS3 compliance. These parts are suitable for applications requiring automotive-grade reliability and extended temperature operation (-55°C to 150°C).

SBC856BLT1G and SBC856BLT3G (onsemi) provide identical electrical performance to the main part with enhanced power dissipation capability (300 mW) and automotive qualification (AEC-Q101). Both parts maintain hFE 220 specification and SOT-23-3 packaging. These variants are recommended for applications with higher thermal margins or automotive requirements.

Functional Equivalents (Acceptable Substitution):

BC856A RFG and BC856ALT1G (onsemi) are functionally equivalent with reduced DC current gain (hFE 125 @ 2mA, 5V) and lower power ratings (200 mW and 300 mW respectively). These parts maintain all critical electrical parameters including 65 V breakdown voltage, 100 mA collector current, and 100 MHz transition frequency. Selection of these parts is appropriate when lower current gain is acceptable for the application circuit design.

BC856B RFG (Taiwan Semiconductor Corporation) provides hFE 220 matching with reduced power dissipation (200 mW). This part is suitable for applications where the 250 mW rating of the main part provides design margin.

Product Status and Compliance:

All identified substitute parts are active in production with RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Automotive-qualified variants (BC856B,215, BC856B,235, SBC856BLT1G, SBC856BLT3G) carry AEC-Q101 certification and are suitable for automotive and industrial applications requiring enhanced reliability documentation.

Frequently Asked Questions (FAQ)

Q: Can BC856B,215 replace BC856B-HF in all applications?

A: BC856B,215 is electrically equivalent with identical DC current gain (220) and power rating (250 mW). The primary difference is operating temperature range (-55°C to 150°C versus -65°C to 150°C). For applications operating above -55°C, BC856B,215 is a direct replacement. For applications requiring operation below -55°C, the original BC856B-HF specification must be maintained.

Q: What is the difference between BC856ALT1G and BC856B-HF?

A: BC856ALT1G differs in two parameters: DC current gain (hFE 125 versus 220) and power dissipation (300 mW versus 250 mW). The reduced current gain may affect circuit biasing and amplification characteristics. Substitution requires circuit analysis to confirm acceptable performance with lower hFE. The higher power rating provides additional thermal margin.

Q: Are SBC856BLT1G and SBC856BLT3G interchangeable?

A: Yes. Both parts are electrically identical with hFE 220, 300 mW power rating, SOT-23-3 packaging, and AEC-Q101 automotive qualification. The designation difference (LT1G versus LT3G) reflects manufacturing lot or packaging reel configuration but does not affect electrical performance or compatibility.

Q: Which substitute part is recommended for automotive applications?

A: BC856B,215, BC856B,235, SBC856BLT1G, and SBC856BLT3G all carry AEC-Q101 automotive qualification. Among these, SBC856BLT1G and SBC856BLT3G offer the highest power dissipation (300 mW) and are recommended for automotive designs requiring enhanced thermal performance and reliability documentation.

Q: Can I use BC856A RFG as a direct replacement?

A: BC856A RFG is functionally equivalent but with reduced DC current gain (125 versus 220). Direct replacement is possible only if circuit design accommodates lower current gain. Applications requiring specific hFE 220 performance must use BC856B variants or equivalent parts with matching gain specification.

Q: What is the significance of the package designation differences (SOT-23 versus SOT-23-3)?

A: SOT-23 and SOT-23-3 refer to the same physical package (TO-236-3, SC-59) with three leads. The designation variation reflects different manufacturer nomenclature but represents identical mechanical and electrical compatibility. All identified parts are mechanically interchangeable in SOT-23-3 footprints.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All identified substitute parts carry RoHS3 compliance certification. All parts also maintain unlimited moisture sensitivity rating (MSL 1), indicating no special storage or handling requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message