BC807-16-QR Equivalent & Substitute Parts

Part Overview

The BC807-16-QR is an active PNP bipolar junction transistor manufactured by Nexperia USA Inc., designed for surface mount applications in TO-236AB packaging. This component operates at 45 V collector-emitter breakdown voltage with a maximum collector current of 500 mA and is qualified to AEC-Q101 automotive standards. The part is ROHS3 compliant with unlimited moisture sensitivity rating (MSL 1).

Substitute parts are necessary when the primary part number becomes unavailable, when alternative packaging formats are required, or when different qualification grades meet application requirements while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Collector Current (Max)	500	mA
Collector-Emitter Breakdown Voltage (Max)	45	V
Vce Saturation (Max) @ Ib, Ic	700 mV @ 50 mA, 500 mA	—
DC Current Gain (hFE Min) @ Ic, Vce	100 @ 100 mA, 1 V	—
Power Dissipation (Max)	250	mW
Transition Frequency	80	MHz
Operating Temperature (Max)	150	°C
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the BC807-16-QR is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Must Match):

Transistor type: PNP
Collector current maximum: 500 mA
Collector-emitter breakdown voltage: 45 V
DC current gain (hFE minimum): 100 @ 100 mA, 1 V
Power dissipation maximum: 250 mW
Transition frequency: 80 MHz
Operating temperature maximum: 150 °C

Mechanical Parameters (Must Match):

Package / Case: TO-236-3, SC-59, SOT-23-3
Mounting type: Surface Mount
Supplier device package: TO-236AB

Compliance Parameters:

RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts are grouped into two categories based on qualification grade:

Category 1: AEC-Q101 Qualified (Automotive Grade) Parts meeting AEC-Q101 automotive qualification standard with identical electrical and mechanical specifications.

Category 2: AEC-Q100 Qualified (Automotive Grade) Parts meeting AEC-Q100 automotive qualification standard with identical electrical and mechanical specifications. These parts differ only in qualification level, not in electrical performance.

Category 3: Alternative Base Product (BCX17 Series) Parts based on the BCX17 product line with identical electrical specifications and packaging. Vce saturation specification differs (620 mV vs. 700 mV), representing improved performance characteristics while maintaining all other parameters.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) mA	Vce(br) V	Vce Sat (Max) mV	hFE (Min)	Power mW	Freq MHz	Package	Qualification	Inventory Pcs
BC807-16-QR	Nexperia USA Inc.	500	45	700	100	250	80	TO-236AB	AEC-Q101	686
BC807,215	Nexperia USA Inc.	500	45	700	100	250	80	TO-236AB	AEC-Q101	2810
BC807-16,215	Nexperia USA Inc.	500	45	700	100	250	80	TO-236AB	AEC-Q101	28968
BC807-16,235	Nexperia USA Inc.	500	45	700	100	250	80	TO-236AB	AEC-Q101	11052
BC807-16LR	Nexperia USA Inc.	500	45	700	100	250	80	TO-236AB	AEC-Q101	3898
BC807-16LVL	Nexperia USA Inc.	500	45	700	100	250	80	TO-236AB	AEC-Q101	10744
BC807-16LZ	Nexperia USA Inc.	500	45	700	100	250	80	TO-236AB	AEC-Q101	31103
BC807K-16R	Nexperia USA Inc.	500	45	700	100	250	80	TO-236AB	AEC-Q100	6614
BC807K-16VL	Nexperia USA Inc.	500	45	700	100	250	80	TO-236AB	AEC-Q100	1124
BCX17,215	Nexperia USA Inc.	500	45	620	100	250	80	TO-236AB	AEC-Q101	3300
BCX17,235	NXP USA Inc.	500	45	620	100	250	80	SOT-23	AEC-Q101	134745

Engineering Selection Recommendations

Primary Substitutes (AEC-Q101 Qualified, Identical Specifications):

BC807-16LZ, BC807-16,215, and BC807-16,235 are direct electrical and mechanical equivalents to the BC807-16-QR. These parts maintain identical electrical performance and automotive qualification status. Selection among these options is based on inventory availability and packaging format requirements. BC807-16LZ offers the highest inventory level at 31,103 pieces.

Secondary Substitutes (AEC-Q100 Qualified):

BC807K-16R and BC807K-16VL are qualified to AEC-Q100 automotive standard rather than AEC-Q101. These parts maintain identical electrical specifications and packaging. AEC-Q100 qualification is suitable for applications where the lower qualification grade meets reliability requirements.

Alternative Product Line (BCX17 Series):

BCX17,215 and BCX17,235 are based on the BCX17 product line and provide improved saturation voltage performance (620 mV maximum versus 700 mV). Both maintain AEC-Q101 qualification and identical electrical parameters across all other specifications. BCX17,235 is available in bulk packaging with significantly higher inventory (134,745 pieces) compared to tape and reel format.

Compliance Verification:

All substitute parts maintain ROHS3 compliance, unlimited moisture sensitivity rating (MSL 1), and REACH unaffected status, matching the primary part's environmental and regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can BC807-16LZ be used as a direct replacement for BC807-16-QR?

A: Yes. BC807-16LZ is electrically and mechanically equivalent to BC807-16-QR. Both parts are PNP transistors with 500 mA maximum collector current, 45 V breakdown voltage, 700 mV maximum saturation voltage, and AEC-Q101 automotive qualification. Both are packaged in TO-236AB surface mount format.

Q: What is the difference between BC807-16-QR and BC807K-16R?

A: The primary difference is automotive qualification grade. BC807-16-QR is qualified to AEC-Q101, while BC807K-16R is qualified to AEC-Q100. Electrical specifications and packaging are identical. AEC-Q100 qualification is appropriate for applications where this lower qualification level satisfies reliability requirements.

Q: Why does BCX17,215 show a lower saturation voltage (620 mV) compared to BC807-16-QR (700 mV)?

A: BCX17,215 represents an alternative product line with improved saturation voltage performance. The lower maximum saturation voltage indicates superior switching characteristics. All other electrical parameters, including collector current, breakdown voltage, current gain, power dissipation, and frequency response, remain identical. This part is suitable for applications where lower saturation voltage provides performance benefits.

Q: Is BCX17,235 compatible with BC807-16-QR in terms of electrical performance?

A: Yes. BCX17,235 maintains identical electrical specifications to BC807-16-QR across all parameters except saturation voltage, which is improved at 620 mV maximum. The primary difference is packaging format: BCX17,235 is supplied in bulk packaging rather than tape and reel format. Both are AEC-Q101 qualified.

Q: What packaging formats are available for BC807-16-QR substitutes?

A: Most substitute parts are supplied in tape and reel (TR) format with TO-236AB supplier device package designation. BCX17,235 is supplied in bulk packaging with SOT-23 package designation. All parts use the same physical TO-236-3 / SC-59 / SOT-23-3 case outline suitable for surface mount assembly.

Q: Are all substitute parts suitable for automotive applications?

A: Yes. All listed substitute parts carry either AEC-Q101 or AEC-Q100 automotive qualification. Both qualification levels are automotive-grade standards. Selection between them depends on specific application reliability requirements and design specifications.

Q: What inventory considerations should guide part selection?

A: BC807-16LZ offers the highest inventory availability at 31,103 pieces in tape and reel format. BCX17,235 provides the largest inventory at 134,745 pieces but in bulk packaging. BC807-16,215 offers 28,968 pieces in tape and reel format. Inventory levels should be evaluated against procurement lead time and supply chain requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message