BC807-16HVL Equivalent & Substitute Parts

Part Overview

The BC807-16HVL is an active PNP bipolar junction transistor manufactured by Nexperia USA Inc., designed for surface mount applications in the TO-236AB package. This component operates at a maximum collector current of 500 mA with a collector-emitter breakdown voltage of 45 V and a transition frequency of 80 MHz. The device is qualified to AEC-Q101 automotive standards and carries ROHS3 compliance. Substitute parts are identified based on matching electrical characteristics, mechanical compatibility, and operational parameters that permit direct circuit substitution without design modification.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) Max	500	mA
Voltage - Collector Emitter Breakdown (Max)	45	V
Vce Saturation (Max) @ Ib, Ic	700 mV @ 50 mA, 500 mA	—
Current - Collector Cutoff (Max)	100	nA
DC Current Gain (hFE) Min @ Ic, Vce	100 @ 100 mA, 1 V	—
Power - Max	320	mW
Frequency - Transition	80	MHz
Operating Temperature (TJ)	175	°C
Mounting Type	Surface Mount	—
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Supplier Device Package	TO-236AB	—
RoHS Status	ROHS3 Compliant	—
Grade	Automotive	—
Qualification	AEC-Q101	—

Substitute Part Grouping Explanation

Substitute parts for the BC807-16HVL are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalents share identical or functionally equivalent electrical specifications across all critical parameters: collector current (500 mA), collector-emitter breakdown voltage (45 V), saturation voltage characteristics, cutoff current, DC current gain, power dissipation capability, and package form factor (TO-236AB / SOT-23-3). These parts differ only in packaging format (Tape & Reel versus Cut Tape) or minor device qualification variants.

Similar Substitutes maintain compatibility in core electrical parameters (transistor type, collector current, collector-emitter breakdown voltage, saturation voltage, package form factor) but exhibit variations in one or more secondary parameters including transition frequency, power dissipation rating, DC current gain, operating temperature range, or cutoff current specification. These parts are suitable for applications where the specified parameter variation does not impact circuit performance.

The following key parameters determine substitution eligibility:

Transistor Type: PNP
Current - Collector (Ic) Max: 500 mA
Voltage - Collector Emitter Breakdown (Max): 45 V or higher
Package / Case: TO-236-3, SC-59, SOT-23-3
Vce Saturation characteristics at specified bias conditions
Mounting Type: Surface Mount

Parameter Comparison

Part Number	Manufacturer	Ic (Max) mA	Vce(BR) V	Vce Sat @ Ib, Ic	hFE Min @ Ic, Vce	Power Max mW	Freq Trans MHz	Package	Packaging Type	Grade
BC807-16HVL	Nexperia USA Inc.	500	45	700 mV @ 50 mA, 500 mA	100 @ 100 mA, 1 V	320	80	TO-236AB	Tape & Reel	Automotive
BC807-16H-QR	Nexperia USA Inc.	500	45	700 mV @ 50 mA, 500 mA	100 @ 100 mA, 1 V	320	80	TO-236AB	Cut Tape & Digi-Reel	Automotive
BC807-16HR	Nexperia USA Inc.	500	45	700 mV @ 50 mA, 500 mA	100 @ 100 mA, 1 V	320	80	TO-236AB	Tape & Reel	Automotive
50A02CH-TL-E	onsemi	500	50	120 mV @ 10 mA, 100 mA	200 @ 10 mA, 2 V	700	690	TO-236-3	Tape & Reel	—
BC807-16 RFG	Taiwan Semiconductor Corporation	500	45	700 mV @ 50 mA, 500 mA	100 @ 100 mA, 1 V	300	100	SOT-23	Tape & Reel	—
BC807-16LT3G	onsemi	500	45	700 mV @ 50 mA, 500 mA	100 @ 100 mA, 1 V	300	100	SOT-23-3	Tape & Reel	—
BC807-25 RFG	Taiwan Semiconductor Corporation	500	45	700 mV @ 50 mA, 500 mA	160 @ 100 mA, 1 V	300	100	SOT-23	Tape & Reel	—
BC807-25LT1G	onsemi	500	45	700 mV @ 50 mA, 500 mA	160 @ 100 mA, 1 V	300	100	SOT-23-3	Cut Tape & Digi-Reel	—
BC807-40 RFG	Taiwan Semiconductor Corporation	500	45	700 mV @ 50 mA, 500 mA	250 @ 100 mA, 1 V	300	100	SOT-23	Cut Tape & Digi-Reel	—
SBC807-25LT3G	onsemi	500	45	700 mV @ 50 mA, 500 mA	160 @ 100 mA, 1 V	300	100	SOT-23-3	Tape & Reel	Automotive

Engineering Selection Recommendations

Parametric Equivalent Selection (Direct Substitution)

The BC807-16H-QR and BC807-16HR are parametric equivalents of the BC807-16HVL, manufactured by Nexperia USA Inc. Both parts maintain identical electrical specifications across all critical parameters and are qualified to AEC-Q101 automotive standards with ROHS3 compliance. The BC807-16H-QR is supplied in Cut Tape & Digi-Reel packaging, while the BC807-16HR is supplied in Tape & Reel format. Selection between these equivalents is determined by packaging and supply chain requirements rather than electrical performance.

Similar Substitute Selection (Application-Dependent)

Similar substitutes including BC807-16 RFG, BC807-16LT3G, BC807-25 RFG, BC807-25LT1G, BC807-40 RFG, and SBC807-25LT3G are suitable for applications where the following parameter variations do not impact circuit operation:

Transition frequency increase from 80 MHz to 100 MHz
Power dissipation reduction from 320 mW to 300 mW
DC current gain variation (hFE ranging from 100 to 250 at specified bias conditions)

The SBC807-25LT3G provides automotive-grade qualification (AEC-Q101) and ROHS3 compliance equivalent to the main part, with the noted electrical parameter variations.

The 50A02CH-TL-E (onsemi) exhibits significant parameter differences including higher transition frequency (690 MHz), increased power dissipation (700 mW), higher collector-emitter breakdown voltage (50 V), and different saturation voltage characteristics. This part is suitable only for applications where these enhanced specifications provide design margin or where the higher performance characteristics are beneficial.

Frequently Asked Questions (FAQ)

Q: Can BC807-16H-QR be used as a direct replacement for BC807-16HVL?

A: Yes. The BC807-16H-QR is a parametric equivalent with identical electrical specifications and automotive-grade AEC-Q101 qualification. The only difference is packaging format (Cut Tape & Digi-Reel versus Tape & Reel). Circuit performance is unaffected by this substitution.

Q: What is the difference between BC807-16 RFG and BC807-16HVL?

A: The BC807-16 RFG differs in three parameters: transition frequency (100 MHz versus 80 MHz), power dissipation (300 mW versus 320 mW), and manufacturer (Taiwan Semiconductor Corporation versus Nexperia USA Inc.). The BC807-16 RFG does not carry automotive-grade qualification. Substitution is valid for non-automotive applications where the higher transition frequency does not introduce stability issues.

Q: Are BC807-25 variants interchangeable with BC807-16 variants?

A: BC807-25 variants have higher DC current gain (hFE minimum of 160 versus 100 at specified bias conditions) and lower power dissipation (300 mW versus 320 mW). They are electrically compatible for most applications but exhibit different gain characteristics. Substitution is valid where circuit design does not depend on specific gain values or where higher gain provides acceptable performance margin.

Q: What does the packaging designation "TO-236AB" mean?

A: TO-236AB is the supplier device package designation for the SOT-23-3 surface mount package, also known as SC-59. All listed substitute parts use this same physical package form factor, ensuring mechanical compatibility with existing printed circuit board layouts.

Q: Is the 50A02CH-TL-E suitable as a substitute for BC807-16HVL?

A: The 50A02CH-TL-E is a similar substitute with compatible collector current (500 mA) and package form factor (TO-236-3). However, it exhibits significant differences in transition frequency (690 MHz versus 80 MHz), power dissipation (700 mW versus 320 mW), and saturation voltage characteristics. Substitution is valid only for applications where these enhanced specifications do not introduce circuit instability or where the higher performance characteristics are required.

Q: Does SBC807-25LT3G provide automotive qualification equivalent to BC807-16HVL?

A: Yes. The SBC807-25LT3G carries AEC-Q101 automotive qualification and ROHS3 compliance equivalent to the BC807-16HVL. It differs in DC current gain (160 versus 100), transition frequency (100 MHz versus 80 MHz), and power dissipation (300 mW versus 320 mW). These parameter variations are acceptable for automotive applications where circuit design accommodates the higher gain and frequency characteristics.

Q: What is the significance of the "H" designation in BC807-16H variants?

A: The "H" designation indicates a specific gain group classification within the BC807 series. BC807-16H parts have a minimum DC current gain (hFE) of 100 at specified bias conditions. This designation is maintained across parametric equivalents (BC807-16H-QR, BC807-16HR) to ensure consistent gain characteristics.

Q: Can I substitute BC807-40 RFG for BC807-16HVL in a high-gain application?

A: Yes, with design consideration. The BC807-40 RFG has a higher DC current gain (hFE minimum of 250 versus 100) and identical collector current and breakdown voltage ratings. Substitution is valid where the higher gain does not cause circuit instability or excessive base current draw. Verify that base drive circuitry can accommodate the lower base current requirement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message