BC69-25PASX Equivalent & Substitute Parts

Part Overview

The BC69-25PASX is an active PNP bipolar junction transistor manufactured by Nexperia USA Inc., designed for surface mount applications in the DFN2020D-3 package. This component operates at maximum ratings of 20 V collector-emitter breakdown voltage and 2 A maximum collector current, with a transition frequency of 140 MHz and maximum power dissipation of 420 mW. The part is supplied in Tape & Reel packaging and maintains ROHS3 compliance with MSL Level 1 (unlimited moisture sensitivity). Equivalent substitute parts are available to address inventory requirements, packaging format preferences, or supply chain considerations while maintaining identical electrical and mechanical specifications.

Substiute Parts

BC69-25PASX

Nexperia USA Inc.In Stock: 3690BC69-25PASX Datasheet

Current PartRFQ

BC69-16PASX

NXP USA Inc.In Stock: 72856BC69-16PASX Datasheet

Parametric EquivalentRFQ

BC69PASX

NXP USA Inc.In Stock: 101036BC69PASX Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BC69-25PASX are qualified based on electrical and mechanical parameter equivalence. The substitution criteria are defined by the following parameters:

Electrical Parameters (Must Match):

• Transistor Type: PNP
• Maximum Collector Current (Ic): 2 A
• Maximum Collector-Emitter Breakdown Voltage: 20 V
• Vce Saturation: 600 mV @ 200 mA, 2 A
• Maximum Collector Cutoff Current (ICBO): 100 nA
• Minimum DC Current Gain (hFE): 85 @ 500 mA, 1 V
• Maximum Power Dissipation: 420 mW
• Transition Frequency: 140 MHz
• Maximum Operating Temperature: 150 °C

Mechanical Parameters (Must Match):

• Package / Case: 3-UDFN Exposed Pad
• Supplier Device Package: DFN2020D-3
• Mounting Type: Surface Mount

Compliance Parameters (Must Match):

• Product Status: Active
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute parts BC69-16PASX and BC69PASX meet all electrical and mechanical equivalence criteria. Differences in packaging format (Tape & Reel versus Bulk) and HTSUS classification do not affect functional substitution.

Parameter Comparison

Engineering Selection Recommendations

All three parts—BC69-25PASX, BC69-16PASX, and BC69PASX—are active products manufactured by Nexperia/NXP USA Inc. and are electrically and mechanically equivalent. Selection between these parts is determined by packaging and inventory requirements rather than functional performance.

BC69-25PASX is supplied in Tape & Reel format and is suitable for automated assembly processes requiring continuous reel feeding. This packaging format is standard for high-volume production environments.

BC69-16PASX and BC69PASX are supplied in Bulk packaging format. These parts are suitable for applications where reel packaging is not required or where bulk quantities are preferred for manual assembly, prototyping, or lower-volume production runs.

All parts maintain active product status and are compliant with applicable regulatory requirements. The choice between substitute parts should be based on production methodology, assembly equipment compatibility, and supply chain logistics rather than electrical performance criteria.

Frequently Asked Questions (FAQ)

Q: Can BC69-16PASX or BC69PASX be used as direct replacements for BC69-25PASX in production?

A: Yes. Both BC69-16PASX and BC69PASX are electrically and mechanically equivalent to BC69-25PASX. All three parts share identical electrical specifications, including collector current rating (2 A), breakdown voltage (20 V), saturation voltage (600 mV), current gain (85 minimum), power dissipation (420 mW), and transition frequency (140 MHz). All three use the same DFN2020D-3 package. The primary difference is packaging format: BC69-25PASX is supplied in Tape & Reel, while BC69-16PASX and BC69PASX are supplied in Bulk.

Q: What is the difference between Tape & Reel and Bulk packaging?

A: Tape & Reel packaging supplies components on a continuous reel suitable for automated pick-and-place assembly equipment. Bulk packaging supplies components in quantities without reel formatting, typically used for manual assembly, prototyping, or lower-volume production. Both packaging formats contain identical components with identical electrical performance.

Q: Are there any compatibility issues when substituting between these parts?

A: No compatibility issues exist. All three parts are pin-compatible, use the same DFN2020D-3 package footprint, and have identical electrical characteristics. Substitution is limited only by packaging format compatibility with your assembly process.

Q: Do all three parts meet the same compliance standards?

A: BC69-25PASX is specified as ROHS3 compliant with MSL Level 1. BC69-16PASX and BC69PASX do not have these specifications explicitly provided in the available data. Compliance verification should be obtained from the manufacturer if regulatory certification is required for your application.

Q: What is the base product number for these parts?

A: The base product number is BC69. The suffixes (-25PASX, -16PASX, PASX) indicate packaging and variant designations but do not affect electrical equivalence.

Q: Can these parts be used interchangeably in the same circuit design?

A: Yes. All three parts have identical electrical ratings and performance characteristics. Circuit designs using BC69-25PASX will function identically with BC69-16PASX or BC69PASX without modification to schematic or PCB layout.