BBA5000004 Equivalent & Substitute Parts Reference

Part Overview

The BBA5000004 is a 150 MHz XO (Standard) LVPECL oscillator manufactured by TXC CORPORATION. This crystal-based oscillator operates at 3.3V with Enable/Disable functionality, housed in a 6-SMD, No Lead surface mount package. The device is designed for applications requiring stable, low-voltage positive emitter-coupled logic output at 150 MHz.

The BBA5000004 maintains Active product status with 956 pieces currently in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when supply chain optimization is required.

Substiute Parts

BBA5000004

TXC CORPORATIONIn Stock: 997BBA5000004 Datasheet

Current PartRFQ

SXO75P3A481-150.000M

Suntsu Electronics, Inc.In Stock: 2091SXO75P3A481-150.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BBA5000004 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Frequency: 150 MHz
• Output Type: LVPECL
• Supply Voltage: 3.3V
• Function: Enable/Disable
• Frequency Stability: ±50ppm
• Operating Temperature Range: -40°C ~ 85°C
• Package / Case: 6-SMD, No Lead
• Mounting Type: Surface Mount
• Base Resonator: Crystal

The substitute part SXO75P3A481-150.000M from Suntsu Electronics, Inc. meets all mandatory matching parameters and is classified as a direct equivalent for the BBA5000004.

Parameter Comparison

Engineering Selection Recommendations

Both the BBA5000004 and SXO75P3A481-150.000M are Active status products with full regulatory compliance. The BBA5000004 carries RoHS Compliant certification, while the SXO75P3A481-150.000M carries ROHS3 Compliant certification. Both parts are classified under ECCN EAR99 and HTSUS 8542.39.0001.

The SXO75P3A481-150.000M provides an equivalent alternative with documented maximum supply current of 80mA. The seated height difference of 0.008" (0.20mm) between the two parts is within typical PCB design tolerances for surface mount applications.

Selection between these parts should be based on availability, supply chain requirements, and design validation status within your organization.

Frequently Asked Questions (FAQ)

Q: Can the SXO75P3A481-150.000M be used as a direct replacement for the BBA5000004?

A: Yes. Both parts share identical frequency (150 MHz), output type (LVPECL), supply voltage (3.3V), function (Enable/Disable), frequency stability (±50ppm), operating temperature range (-40°C ~ 85°C), and package specifications (6-SMD, No Lead, 7.00mm x 5.00mm). The seated height difference of 0.20mm is within standard PCB design tolerances.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by matching frequency, output type, supply voltage, enable/disable function, frequency stability, operating temperature range, package type, and physical dimensions. All these parameters must be identical between the main part and substitute.

Q: Are there any compliance differences between these parts?

A: Both parts are RoHS compliant. The BBA5000004 carries RoHS Compliant certification, while the SXO75P3A481-150.000M carries ROHS3 Compliant certification. Both are classified as EAR99 and fall under HTSUS code 8542.39.0001.

Q: What is the difference in seated height between these oscillators?

A: The BBA5000004 has a maximum seated height of 0.059" (1.50mm), while the SXO75P3A481-150.000M has a maximum seated height of 0.067" (1.70mm). The difference of 0.008" (0.20mm) is within typical PCB design clearance specifications for surface mount components.

Q: Is supply current information available for both parts?

A: The SXO75P3A481-150.000M specifies a maximum supply current of 80mA. Supply current specifications for the BBA5000004 are not provided in the available documentation.