BAS85-L0 L1 Equivalent & Substitute Parts

Part Overview

The BAS85-L0 L1 is a Schottky diode rated for 30 V DC reverse voltage and 200 mA average rectified current, manufactured by Taiwan Semiconductor Corporation in a Mini MELF surface mount package. This component is classified as obsolete, making identification of active equivalent and substitute parts essential for ongoing design support and procurement continuity. Equivalent parts maintain identical electrical performance characteristics while substitute parts provide functional compatibility within the specified parameter range.

Substiute Parts

BAS85-L0 L1

Taiwan Semiconductor CorporationIn Stock: 1080BAS85-L0 L1 Datasheet

Current PartRFQ

BAS85,115

Nexperia USA Inc.In Stock: 235206BAS85,115 Datasheet

Parametric EquivalentRFQ

BAS85,135

Nexperia USA Inc.In Stock: 4485BAS85,135 Datasheet

Parametric EquivalentRFQ

BAS85-GS08

Vishay General Semiconductor - Diodes DivisionIn Stock: 16160BAS85-GS08 Datasheet

Parametric EquivalentRFQ

BAS85-M-18

Vishay General Semiconductor - Diodes DivisionIn Stock: 1168BAS85-M-18 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BAS85-L0 L1 is determined by equivalence across the following critical parameters:

Electrical Performance Criteria:

• Voltage - DC Reverse (Vr) (Max): 30 V
• Current - Average Rectified (Io): 200 mA
• Voltage - Forward (Vf) (Max) @ If: 800 mV @ 100 mA
• Technology: Schottky
• Speed Classification: Small Signal ≤ 200mA (Io), Any Speed

Physical & Environmental Criteria:

• Package / Case: DO-213AC, MINI-MELF, SOD-80
• Mounting Type: Surface Mount
• Operating Temperature - Junction (Max): 125°C
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All identified substitute parts maintain these core parameters. Variations in reverse leakage current (within 2 to 2.3 µA @ 25 V) and packaging format (Cut Tape, Tape & Reel, or LLDS) do not affect functional substitution. The BAS85-GS08 and BAS85-M-18 variants from Vishay maintain identical electrical specifications including reverse recovery time of 5 ns. The BAS85,115 and BAS85,135 variants from Nexperia USA Inc. provide equivalent performance with reverse leakage current of 2.3 µA @ 25 V.

Parameter Comparison

Engineering Selection Recommendations

Active Substitute Selection:

All four identified substitute parts are classified as active products and provide direct functional equivalence to the obsolete BAS85-L0 L1. Selection among these alternatives is based on procurement requirements and application constraints:

Nexperia USA Inc. Options:

• BAS85,115 (Cut Tape & Digi-Reel® packaging): Suitable for applications requiring flexible packaging formats with high inventory availability (235,100 pcs).
• BAS85,135 (Tape & Reel packaging): Appropriate for high-volume production environments with standard reel-based assembly processes (4,390 pcs available).

Vishay General Semiconductor Options:

• BAS85-GS08 (Cut Tape & Digi-Reel® packaging): Maintains identical reverse recovery time specification of 5 ns and reverse leakage current of 2 µA @ 25 V, matching the original part characteristics (16,100 pcs available).
• BAS85-M-18 (Tape & Reel packaging): Qualified to AEC-Q101 automotive standard with automotive-grade designation. Suitable for automotive and mission-critical applications requiring automotive qualification (1,156 pcs available).

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and identical electrical performance within the specified parameter range. Selection should prioritize inventory availability, packaging format compatibility with assembly equipment, and application-specific requirements such as automotive qualification.

Frequently Asked Questions (FAQ)

Q: Can BAS85,115 and BAS85,135 be used interchangeably with BAS85-L0 L1?

A: Yes. Both parts are manufactured by Nexperia USA Inc. and maintain identical electrical specifications: 30 V reverse voltage, 200 mA average rectified current, and 800 mV forward voltage at 100 mA. The difference between these two variants is packaging format: BAS85,115 is supplied in Cut Tape & Digi-Reel® format, while BAS85,135 is supplied in Tape & Reel format. Selection depends on assembly process requirements.

Q: What is the difference between BAS85-GS08 and BAS85-M-18?

A: Both are manufactured by Vishay General Semiconductor and provide identical electrical performance. BAS85-GS08 is supplied in Cut Tape & Digi-Reel® packaging, while BAS85-M-18 is supplied in Tape & Reel packaging. Additionally, BAS85-M-18 carries automotive-grade designation and AEC-Q101 qualification, making it suitable for automotive applications. BAS85-GS08 is appropriate for general industrial applications.

Q: Are there differences in reverse leakage current between substitute options?

A: Yes. BAS85-L0 L1, BAS85-GS08, and BAS85-M-18 specify reverse leakage current of 2 µA @ 25 V. BAS85,115 and BAS85,135 specify 2.3 µA @ 25 V. This variation remains within acceptable tolerance for Schottky diode applications and does not affect functional substitution.

Q: Is reverse recovery time specified for all substitute parts?

A: No. BAS85-L0 L1, BAS85-GS08, and BAS85-M-18 specify reverse recovery time of 5 ns. BAS85,115 and BAS85,135 do not provide reverse recovery time specifications in the available data. For applications requiring specific reverse recovery time performance, BAS85-GS08 or BAS85-M-18 are recommended.

Q: Which substitute part is recommended for automotive applications?

A: BAS85-M-18 is the appropriate selection for automotive applications. This part carries automotive-grade designation and AEC-Q101 qualification, meeting automotive industry standards and reliability requirements.

Q: Can these substitute parts be used in the same PCB footprint as BAS85-L0 L1?

A: Yes. All substitute parts use identical package designation: DO-213AC, MINI-MELF, SOD-80. PCB footprints designed for BAS85-L0 L1 accommodate all identified substitute parts without modification.

Q: What is the inventory status of each substitute part?

A: BAS85,115 has the highest inventory availability at 235,100 pcs. BAS85-GS08 has 16,100 pcs available. BAS85,135 has 4,390 pcs available. BAS85-M-18 has the lowest availability at 1,156 pcs. Procurement decisions should account for lead time and volume requirements.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All identified substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental and regulatory compliance profile of the original BAS85-L0 L1.