BAS70DW-06-TP Equivalent & Substitute Parts

Part Overview

The BAS70DW-06-TP is a Schottky diode array manufactured by Micro Commercial Co, configured as a 2 Pair Common Anode device rated for 70 V DC reverse voltage and 70 mA average rectified current per diode. The component is packaged in a 6-TSSOP (SC-88, SOT-363) surface mount configuration and is currently Active in product status with ROHS3 compliance.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across manufacturers. This reference page identifies alternative sources for the BAS70DW-06-TP to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

BAS70DW-06-TP

Micro Commercial CoIn Stock: 4052BAS70DW-06-TP Datasheet

Current PartRFQ

BAS70DW-06-7

Diodes IncorporatedIn Stock: 9425BAS70DW-06-7 Datasheet

Parametric EquivalentRFQ

BAS70DW-06-7-F

Diodes IncorporatedIn Stock: 4145BAS70DW-06-7-F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BAS70DW-06-TP are identified based on strict electrical and mechanical parameter equivalence. The following criteria determine substitution eligibility:

Electrical Parameters (Must Match):

• Diode Configuration: 2 Pair Common Anode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 70 V
• Current - Average Rectified (Io) (per Diode): 70 mA (DC)
• Voltage - Forward (Vf) (Max) @ If: 1 V @ 15 mA
• Reverse Recovery Time (trr): 5 ns
• Current - Reverse Leakage @ Vr: 100 nA @ 50 V
• Operating Temperature - Junction: -55°C ~ 125°C

Mechanical Parameters (Must Match):

• Package / Case: 6-TSSOP, SC-88, SOT-363
• Mounting Type: Surface Mount
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All identified substitutes maintain these parameters without deviation. Differences in manufacturer, product status, compliance certifications, and packaging format (Tape & Reel vs. bulk) do not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

BAS70DW-06-7-F (Diodes Incorporated) - Primary Substitute

The BAS70DW-06-7-F is the preferred substitute for the BAS70DW-06-TP. Both parts are Active in product status, ROHS3 compliant, and packaged in Tape & Reel format. The BAS70DW-06-7-F carries Automotive grade qualification with AEC-Q101 certification, providing additional qualification for applications requiring automotive-level reliability. All electrical and mechanical parameters are identical to the main part.

BAS70DW-06-7 (Diodes Incorporated) - Secondary Substitute

The BAS70DW-06-7 maintains full electrical and mechanical equivalence to the BAS70DW-06-TP. However, this part is Discontinued at DiGi Electronics and carries RoHS non-compliant status. Selection of this part is appropriate only when RoHS compliance is not a design requirement and discontinued inventory availability is confirmed through alternative distribution channels.

Frequently Asked Questions (FAQ)

Q: Can BAS70DW-06-7-F be used as a direct replacement for BAS70DW-06-TP in production?

A: Yes. The BAS70DW-06-7-F maintains identical electrical parameters (70 V reverse voltage, 70 mA rectified current, 1 V forward voltage at 15 mA, 5 ns reverse recovery time, 100 nA reverse leakage at 50 V) and mechanical specifications (6-TSSOP SOT-363 package, surface mount, MSL 1). Both parts are Active and ROHS3 compliant. The BAS70DW-06-7-F includes Automotive grade and AEC-Q101 qualification.

Q: What is the difference between BAS70DW-06-7 and BAS70DW-06-7-F?

A: Both parts are manufactured by Diodes Incorporated and share identical electrical and mechanical parameters. The primary differences are: BAS70DW-06-7 is Discontinued at DiGi Electronics and RoHS non-compliant, while BAS70DW-06-7-F is Active, ROHS3 compliant, and carries Automotive grade with AEC-Q101 qualification. The "-F" suffix indicates the Tape & Reel packaging format.

Q: Are all substitute parts available in Tape & Reel packaging?

A: BAS70DW-06-TP and BAS70DW-06-7-F are both specified as Tape & Reel (TR) packaging. BAS70DW-06-7 does not have packaging format specified in available data. Confirm packaging format with the supplier before procurement.

Q: Does the Automotive qualification of BAS70DW-06-7-F affect compatibility with standard industrial applications?

A: No. Automotive qualification (AEC-Q101) represents an additional qualification level and does not restrict use in standard industrial applications. The part maintains all electrical and mechanical specifications required for the BAS70DW-06-TP application.

Q: What is the significance of the "-TP" and "-F" suffixes in the part numbers?

A: The "-TP" suffix in BAS70DW-06-TP indicates Tape & Reel packaging. The "-F" suffix in BAS70DW-06-7-F also indicates Tape & Reel packaging format. These suffixes denote packaging and distribution format only and do not affect electrical or mechanical performance.

Q: Can BAS70DW-06-7 be used if RoHS compliance is not required?

A: Yes. BAS70DW-06-7 maintains full electrical and mechanical equivalence to BAS70DW-06-TP. However, this part is Discontinued at DiGi Electronics. Substitution is appropriate only when discontinued inventory is available through alternative distribution channels and RoHS compliance is not a design or regulatory requirement.