BAS70DW-06-7 Equivalent & Substitute Parts

Part Overview

The BAS70DW-06-7 is a Schottky diode array manufactured by Diodes Incorporated, configured as a 2 Pair Common Anode device in a 6-TSSOP (SOT-363) surface mount package. This component is designed for applications requiring low forward voltage drop and fast switching characteristics typical of Schottky rectifier technology.

The BAS70DW-06-7 is currently discontinued at DiGi Electronics. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this diode array configuration.

Substiute Parts

BAS70DW-06-7

Diodes IncorporatedIn Stock: 9425BAS70DW-06-7 Datasheet

Current PartRFQ

BAS70DW-06-7

Diodes IncorporatedIn Stock: 9425BAS70DW-06-7 Datasheet

Parametric EquivalentRFQ

BAS70DW-06-7-F

Diodes IncorporatedIn Stock: 4145BAS70DW-06-7-F Datasheet

Parametric EquivalentRFQ

BAS70DW-06-TP

Micro Commercial CoIn Stock: 4052BAS70DW-06-TP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BAS70DW-06-7 is determined by strict adherence to the following electrical and mechanical parameters:

Critical Substitution Parameters:

• Diode Configuration: 2 Pair Common Anode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 70 V
• Current - Average Rectified (Io) (per Diode): 70 mA (DC)
• Voltage - Forward (Vf) (Max) @ If: 1 V @ 15 mA
• Reverse Recovery Time (trr): 5 ns
• Current - Reverse Leakage @ Vr: 100 nA @ 50 V
• Operating Temperature - Junction: -55°C ~ 125°C
• Package / Case: 6-TSSOP, SC-88, SOT-363

All identified substitute parts match these parameters exactly. Variations in packaging format (bulk versus Tape & Reel), manufacturer identity, and compliance certifications do not affect electrical or mechanical compatibility when these core parameters remain constant.

Parameter Comparison

Engineering Selection Recommendations

BAS70DW-06-7-F (Diodes Incorporated)

This part is a direct parametric equivalent to the BAS70DW-06-7 with identical electrical specifications and package configuration. The BAS70DW-06-7-F carries Active product status and is available in Tape & Reel packaging format. This part includes AEC-Q101 automotive qualification and ROHS3 compliance, providing enhanced regulatory alignment for applications requiring automotive-grade components or RoHS compliance.

BAS70DW-06-TP (Micro Commercial Co)

This part is a direct parametric equivalent to the BAS70DW-06-7 with identical electrical specifications and package configuration. The BAS70DW-06-TP carries Active product status and is available in Tape & Reel packaging format. This part includes ROHS3 compliance, providing regulatory alignment for applications requiring RoHS compliance.

Both substitute parts maintain full electrical and mechanical compatibility with the original BAS70DW-06-7 design. Selection between alternatives depends on procurement requirements, packaging format preferences, and compliance certifications applicable to the end application.

Frequently Asked Questions (FAQ)

Q: Can BAS70DW-06-7-F be used as a direct replacement for BAS70DW-06-7?

A: Yes. The BAS70DW-06-7-F is a parametric equivalent with identical electrical characteristics, diode configuration, and package type. The primary difference is packaging format (Tape & Reel versus bulk) and product status (Active versus Discontinued). Both parts are electrically interchangeable.

Q: What is the difference between BAS70DW-06-7-F and BAS70DW-06-TP?

A: Both parts are parametric equivalents with identical electrical specifications and package configuration. The primary differences are manufacturer (Diodes Incorporated versus Micro Commercial Co) and packaging format (both Tape & Reel). Selection depends on supplier availability and procurement preferences.

Q: Does the Tape & Reel packaging format affect circuit performance?

A: No. Tape & Reel is a packaging and delivery format for automated assembly processes. It does not affect electrical performance, thermal characteristics, or mechanical compatibility. The component itself remains identical.

Q: Are there RoHS compliance differences between these parts?

A: Yes. The original BAS70DW-06-7 is RoHS non-compliant. Both substitute parts (BAS70DW-06-7-F and BAS70DW-06-TP) are ROHS3 compliant. Applications requiring RoHS compliance must use one of the substitute parts.

Q: Is the BAS70DW-06-7-F automotive qualified?

A: Yes. The BAS70DW-06-7-F includes AEC-Q101 automotive qualification. The BAS70DW-06-TP does not carry automotive qualification. Applications requiring automotive-grade components should specify BAS70DW-06-7-F.

Q: Can these parts be used interchangeably in existing PCB designs?

A: Yes. All three parts use the identical 6-TSSOP (SOT-363) package with the same pinout and mechanical footprint. No PCB layout modifications are required for substitution.

Q: What is the inventory status of these substitute parts?

A: BAS70DW-06-7-F has 4050 pieces in stock. BAS70DW-06-TP has 4013 pieces in stock. Both parts are currently available from inventory.