BAS70-06Q-7-F Equivalent & Substitute Parts

Part Overview

The BAS70-06Q-7-F is a Schottky diode array manufactured by Diodes Incorporated, configured as a 1 Pair Common Anode arrangement in a surface mount SOT-23-3 package. This component is designed for applications requiring low forward voltage drop and fast switching characteristics typical of Schottky rectifier technology. The part maintains Active product status and carries automotive-grade qualification under AEC-Q101 standards. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity while maintaining identical functional performance and compliance certifications.

Substiute Parts

BAS70-06Q-7-F

Diodes IncorporatedIn Stock: 3954BAS70-06Q-7-F Datasheet

Current PartRFQ

BAS70-06Q-13-F

Diodes IncorporatedIn Stock: 747BAS70-06Q-13-F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BAS70-06Q-7-F are identified based on strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key parameters that must remain identical:

• Diode Configuration: 1 Pair Common Anode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 70 V
• Current - Average Rectified (Io) (per Diode): 70 mA (DC)
• Voltage - Forward (Vf) (Max) @ If: 1 V @ 15 mA
• Reverse Recovery Time (trr): 2.5 ns
• Current - Reverse Leakage @ Vr: 100 nA @ 50 V
• Operating Temperature - Junction: -55°C ~ 125°C
• Grade: Automotive
• Qualification: AEC-Q101
• Package / Case: TO-236-3, SC-59, SOT-23-3
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes. The BAS70-06Q-13-F is identified as a parametric equivalent substitute based on complete alignment with all specified parameters.

Parameter Comparison

Engineering Selection Recommendations

The BAS70-06Q-7-F and BAS70-06Q-13-F are direct parametric equivalents suitable for interchangeable use in circuit designs. Both components carry identical electrical specifications, mechanical packaging, and compliance certifications. Selection between these parts may be based on inventory availability and supply chain considerations. The BAS70-06Q-7-F currently maintains higher inventory levels (3917 Pcs) compared to the BAS70-06Q-13-F (687 Pcs). Both parts maintain Active product status and satisfy automotive-grade requirements with AEC-Q101 qualification. Both components are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

Frequently Asked Questions (FAQ)

Q: Can the BAS70-06Q-13-F be used as a direct replacement for the BAS70-06Q-7-F?

A: Yes. The BAS70-06Q-13-F is a parametric equivalent with identical electrical characteristics, package configuration, and compliance certifications. Direct substitution is supported without circuit modification.

Q: Are there any differences in the SOT-23-3 package between these parts?

A: No. Both parts use the identical TO-236-3, SC-59, SOT-23-3 surface mount package with matching pin configurations and mechanical dimensions.

Q: Do both parts meet automotive qualification standards?

A: Yes. Both the BAS70-06Q-7-F and BAS70-06Q-13-F carry automotive-grade classification and AEC-Q101 qualification, meeting automotive industry reliability and quality standards.

Q: What is the difference between the part numbers BAS70-06Q-7-F and BAS70-06Q-13-F?

A: The part numbers differ in their manufacturing date code or tape reel configuration designations (the "-7-F" and "-13-F" suffixes), but all electrical and mechanical specifications remain identical. Both are manufactured by Diodes Incorporated under the BAS70 base product number.

Q: Are there any temperature or voltage rating differences?

A: No. Both parts operate across the identical temperature range (-55°C ~ 125°C) and maintain the same maximum reverse voltage (70 V) and forward voltage characteristics (1 V @ 15 mA).

Q: Can these parts be used in high-frequency switching applications?

A: Yes. Both parts feature a reverse recovery time of 2.5 ns, supporting small signal switching applications with frequencies typical of Schottky diode performance in this current class.

Q: Are moisture sensitivity considerations the same for both parts?

A: Yes. Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage, handling, or reflow processing.