BAS69-07P6FILM Equivalent & Substitute Parts

Part Overview

The BAS69-07P6FILM is a Schottky diode array manufactured by STMicroelectronics, configured as 2 independent diodes rated for 15 V DC reverse voltage and 10 mA average rectified current per diode. The device is housed in a SOT-666 surface mount package and is classified as Obsolete product status.

Due to its obsolete classification, sourcing original BAS69-07P6FILM units may present supply chain challenges. Equivalent substitute parts with compatible electrical and mechanical specifications are available to maintain design continuity and ensure circuit functionality.

Substiute Parts

BAS69-07P6FILM

STMicroelectronicsIn Stock: 862BAS69-07P6FILM Datasheet

Current PartRFQ

BAT74V,115

Nexperia USA Inc.In Stock: 4888BAT74V,115 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BAS69-07P6FILM is determined by the following critical parameters:

Configuration Match: Both the main part and substitute must feature 2 independent diode configuration to maintain circuit topology compatibility.

Technology Match: Schottky technology must be preserved to ensure consistent forward voltage characteristics and switching behavior.

Package Compatibility: SOT-666 surface mount package ensures mechanical and electrical pin compatibility with existing PCB layouts.

Electrical Ratings: Substitute parts must support the application's voltage and current requirements. The BAS69-07P6FILM operates at 15 V maximum reverse voltage and 10 mA per diode. Substitute parts with equal or higher ratings in both parameters are electrically compatible.

Compliance Certifications: RoHS3 compliance and MSL Level 1 rating must be maintained for manufacturing and environmental standards adherence.

The BAT74V,115 meets all substitution criteria through matching configuration, technology, package type, and compliance requirements, while providing enhanced electrical ratings.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: BAT74V,115

The BAT74V,115 manufactured by Nexperia USA Inc. is the qualified substitute for the BAS69-07P6FILM. This part maintains identical diode configuration (2 independent), technology (Schottky), and package format (SOT-666), ensuring direct functional and mechanical compatibility.

The BAT74V,115 provides superior electrical ratings with 30 V maximum reverse voltage and 200 mA per diode current capacity, both exceeding the BAS69-07P6FILM specifications. These enhanced ratings ensure the substitute operates within safe margins for applications originally designed for the main part.

Both parts maintain ROHS3 compliance and MSL Level 1 rating, satisfying manufacturing and environmental requirements. The BAT74V,115 carries "Not For New Designs" status, indicating availability for replacement and legacy support applications.

The primary consideration is the reduced maximum junction operating temperature of the BAT74V,115 (125°C versus 150°C for the BAS69-07P6FILM). Applications operating near the upper thermal limits of the original part require thermal analysis to confirm the substitute's suitability.

Frequently Asked Questions (FAQ)

Q: Can the BAT74V,115 directly replace the BAS69-07P6FILM in existing designs?

A: Yes. Both parts share identical diode configuration (2 independent), Schottky technology, and SOT-666 package format. Pin-to-pin compatibility is maintained, allowing direct PCB substitution without layout modifications.

Q: What are the key electrical differences between these parts?

A: The BAT74V,115 provides higher voltage and current ratings. The BAS69-07P6FILM is rated 15 V / 10 mA per diode, while the BAT74V,115 is rated 30 V / 200 mA per diode. Both ratings are compatible with applications designed for the original part, as the substitute operates within or below the original specifications.

Q: Are there any thermal considerations when substituting?

A: The BAT74V,115 has a maximum junction temperature of 125°C compared to 150°C for the BAS69-07P6FILM. Applications operating at elevated temperatures near the original part's thermal limits require verification that the substitute's lower maximum temperature does not compromise circuit performance.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the BAS69-07P6FILM and BAT74V,115 are ROHS3 compliant and carry MSL Level 1 (Unlimited) moisture sensitivity rating, meeting identical environmental and manufacturing standards.

Q: Why is the BAS69-07P6FILM classified as Obsolete?

A: Obsolete classification indicates the part is no longer manufactured or supported by STMicroelectronics. The BAT74V,115 substitute ensures continued availability for replacement and legacy system support.

Q: What is the difference between SOT-563 and SOT-666 packages?

A: Both packages are surface mount formats compatible with the BAS69-07P6FILM and BAT74V,115. The supplier device package for both parts is SOT-666, which is the standard package format for these diode arrays.

Q: Can the BAT74V,115 be used in new designs?

A: The BAT74V,115 carries "Not For New Designs" status, indicating it is intended for replacement and legacy applications. For new designs, consultation with the manufacturer regarding current-generation alternatives is recommended.