BAS40DW-06-7 Equivalent & Substitute Parts

Part Overview

The BAS40DW-06-7 is a Schottky diode array manufactured by Diodes Incorporated, configured as a 2 Pair Common Anode arrangement in a 6-TSSOP (SOT-363) surface mount package. This component is rated for 40 V DC reverse voltage with 200 mA average rectified current per diode and features a maximum forward voltage of 1 V at 40 mA. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent alternatives that maintain identical electrical and mechanical specifications for seamless circuit integration.

Substiute Parts

BAS40DW-06-7

Diodes IncorporatedIn Stock: 1015BAS40DW-06-7 Datasheet

Current PartRFQ

BAS40DW-06-7-F

Diodes IncorporatedIn Stock: 81412BAS40DW-06-7-F Datasheet

DirectRFQ

BAS40DW-06-TP

Micro Commercial CoIn Stock: 6687BAS40DW-06-TP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BAS40DW-06-7 is determined by strict equivalence across all electrical and mechanical parameters. The following criteria establish valid substitutes:

Electrical Equivalence Requirements:

• Diode configuration: 2 Pair Common Anode
• Technology: Schottky
• Maximum DC reverse voltage: 40 V
• Average rectified current per diode: 200 mA
• Maximum forward voltage: 1 V @ 40 mA
• Reverse recovery time: 5 ns
• Reverse leakage current: 200 nA @ 30 V
• Operating temperature range: -55°C ~ 125°C

Mechanical Equivalence Requirements:

• Mounting type: Surface Mount
• Package designation: 6-TSSOP, SC-88, SOT-363
• Supplier device package: SOT-363

All identified substitute parts meet these criteria without exception. Packaging format (bulk versus tape & reel) does not affect electrical or mechanical compatibility and represents a logistics consideration only.

Parameter Comparison

Engineering Selection Recommendations

BAS40DW-06-7-F (Diodes Incorporated)

This part is the direct manufacturer equivalent of the BAS40DW-06-7, produced by the same manufacturer with identical electrical and mechanical specifications. The BAS40DW-06-7-F carries Active product status and ROHS3 compliance, providing superior long-term availability and regulatory alignment compared to the discontinued original part. Inventory availability is substantial at 81,400 units. Selection of this part is appropriate for applications requiring manufacturer continuity and regulatory compliance.

BAS40DW-06-TP (Micro Commercial Co)

This part provides complete electrical and mechanical equivalence to the BAS40DW-06-7 while sourced from an alternative manufacturer. The BAS40DW-06-TP maintains Active product status and ROHS3 compliance. Inventory availability is 6,635 units. This part is suitable for applications where multi-source qualification is acceptable and where alternative manufacturer sourcing provides supply chain resilience.

Both substitute parts are electrically and mechanically interchangeable with the BAS40DW-06-7 without circuit modification. Selection between alternatives should be based on supply chain requirements, manufacturer preference, and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can BAS40DW-06-7-F be used as a direct replacement for BAS40DW-06-7?

A: Yes. The BAS40DW-06-7-F is electrically and mechanically identical to the BAS40DW-06-7. Both parts share the same diode configuration, voltage rating, current rating, forward voltage characteristics, reverse recovery time, leakage current specifications, temperature range, and SOT-363 package. The primary difference is product status (Active versus Discontinued) and packaging format (Tape & Reel versus bulk).

Q: What is the difference between BAS40DW-06-7-F and BAS40DW-06-TP?

A: Both parts are electrically and mechanically equivalent. The primary differences are manufacturer (Diodes Incorporated versus Micro Commercial Co) and inventory availability. Both carry ROHS3 compliance and Active product status. Selection between these parts depends on supply chain strategy and manufacturer qualification requirements.

Q: Does packaging format (bulk versus Tape & Reel) affect circuit performance?

A: No. Packaging format is a logistics consideration only and does not affect electrical performance, mechanical compatibility, or circuit function. Both bulk and Tape & Reel formats contain identical components.

Q: Are the substitute parts RoHS compliant?

A: Yes. Both BAS40DW-06-7-F and BAS40DW-06-TP are ROHS3 compliant. The original BAS40DW-06-7 is RoHS non-compliant. Applications requiring RoHS compliance must use one of the substitute parts.

Q: Can I use BAS40DW-06-TP from Micro Commercial Co in a design originally specified for Diodes Incorporated BAS40DW-06-7?

A: Yes. The BAS40DW-06-TP meets all electrical and mechanical requirements for direct substitution. However, design documentation and supplier qualification records should be updated to reflect the manufacturer change.

Q: What are the key parameters that determine substitution eligibility?

A: Substitution eligibility is determined by equivalence in diode configuration (2 Pair Common Anode), technology (Schottky), voltage rating (40 V), current rating (200 mA per diode), forward voltage (1 V @ 40 mA), reverse recovery time (5 ns), leakage current (200 nA @ 30 V), temperature range (-55°C ~ 125°C), and package type (SOT-363). All identified substitutes meet these criteria without exception.

Q: Is the SOT-363 package the same as 6-TSSOP and SC-88?

A: Yes. SOT-363, 6-TSSOP, and SC-88 are equivalent designations for the same physical package. All substitute parts use this identical package format and are mechanically interchangeable.