BAS16VV,115 Equivalent & Substitute Parts

Part Overview

The BAS16VV,115 is a diode array featuring three independent general-purpose rectifier diodes rated for 100 V DC reverse voltage and 200 mA average rectified current per diode. Manufactured by Nexperia USA Inc., this component is housed in a SOT-563 or SOT-666 surface mount package and is compliant with RoHS3 and REACH standards.

The BAS16VV,115 carries a product status designation of "Not For New Designs," indicating that this part is no longer recommended for new circuit development. Identification of equivalent and substitute parts is necessary to support existing designs, facilitate design transitions, and ensure continued component availability for maintenance and production requirements.

Key Parameters

Parameter	Value
Diode Configuration	3 Independent
Voltage - DC Reverse (Vr) (Max)	100 V
Current - Average Rectified (Io) per Diode	200 mA (DC)
Voltage - Forward (Vf) (Max) @ If	1.25 V @ 150 mA
Reverse Recovery Time (trr)	4 ns
Current - Reverse Leakage @ Vr	500 nA @ 80 V
Operating Temperature - Junction (Max)	150°C
Package / Case	SOT-563, SOT-666
Mounting Type	Surface Mount
Technology	Standard
RoHS Status	RoHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the BAS16VV,115 are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalents maintain identical or superior electrical specifications across all critical parameters: 100 V DC reverse voltage rating, 200 mA average rectified current per diode, 1.25 V forward voltage at 150 mA, 4 ns reverse recovery time, and 500 nA reverse leakage current at 80 V. These parts are housed in the same SOT-563 or SOT-666 surface mount packages and operate across the same temperature range. Parametric equivalents are direct functional replacements with no circuit redesign required.

Functional Substitutes provide reduced voltage ratings (80 V DC reverse) and increased current capacity (250 mA), with different package configurations (SOT-23). These parts maintain the same forward voltage characteristic (1.25 V @ 150 mA) and reverse recovery time (4 ns) but are housed in single-diode packages rather than diode arrays. Functional substitutes require circuit-level evaluation to confirm suitability for the intended application.

The key parameters determining substitution eligibility are:

Diode configuration (array vs. single diode)
Voltage - DC Reverse (Vr) rating
Current - Average Rectified (Io) capacity
Forward voltage (Vf) characteristics
Package type and form factor
Product status and availability

Parameter Comparison

Parameter	BAS16VV,115 (Main)	BAS16VV-7	BAS16VA-7	BAS16VVQ-7	BAS16E6327HTSA1	BAS16E6433HTMA1
Manufacturer	Nexperia USA Inc.	Diodes Incorporated	Diodes Incorporated	Diodes Incorporated	Infineon Technologies	Infineon Technologies
Diode Configuration	3 Independent	3 Independent	3 Independent	3 Independent	Single Diode	Single Diode
Voltage - DC Reverse (Vr) (Max)	100 V	100 V	100 V	100 V	80 V	80 V
Current - Average Rectified (Io)	200 mA	200 mA	200 mA	200 mA	250 mA	250 mA
Voltage - Forward (Vf) (Max) @ If	1.25 V @ 150 mA	1.25 V @ 150 mA	1.25 V @ 150 mA	1.25 V @ 150 mA	1.25 V @ 150 mA	1.25 V @ 150 mA
Reverse Recovery Time (trr)	4 ns	4 ns	4 ns	4 ns	4 ns	4 ns
Current - Reverse Leakage @ Vr	500 nA @ 80 V	500 nA @ 80 V	500 nA @ 80 V	500 nA @ 80 V	1 µA @ 75 V	1 µA @ 75 V
Operating Temperature - Junction	150°C (Max)	-55°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 150°C	150°C (Max)	150°C (Max)
Package / Case	SOT-563, SOT-666	SOT-563, SOT-666	SOT-563, SOT-666	SOT-563, SOT-666	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3
Packaging Type	Tape & Reel (TR)	Tape & Reel (TR)	Tape & Reel (TR)	Tape & Reel (TR)	Cut Tape (CT)	Tape & Reel (TR)
Product Status	Not For New Designs	Active	Active	Active	Last Time Buy	Last Time Buy
RoHS Status	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant	RoHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

Parametric Equivalent Selection (Recommended for Direct Replacement)

The BAS16VV-7, BAS16VA-7, and BAS16VVQ-7 manufactured by Diodes Incorporated are parametric equivalents to the BAS16VV,115. These parts maintain identical electrical specifications across all critical parameters and are housed in the same SOT-563 and SOT-666 surface mount packages. All three parts carry Active product status, ensuring long-term availability and continued manufacturing support.

BAS16VV-7 is the preferred choice for general applications, with 29,400 units in current inventory. BAS16VA-7 provides an alternative source with 6,605 units available. BAS16VVQ-7 is qualified to AEC-Q101 automotive standards and carries Automotive grade designation, making it suitable for automotive and high-reliability applications, with 980 units in inventory.

All parametric equivalents are RoHS3 compliant and REACH unaffected, maintaining regulatory compliance with the original part. Operating temperature range extends to -55°C minimum, providing superior low-temperature performance compared to the BAS16VV,115.

Functional Substitute Selection (Application-Dependent)

The BAS16E6327HTSA1 (Infineon Technologies, Cut Tape packaging, 2,400 units) and BAS16E6433HTMA1 (Infineon Technologies, Tape & Reel packaging, 883 units) are functional substitutes with reduced voltage ratings (80 V DC reverse) and increased current capacity (250 mA). These single-diode packages are suitable only for applications where the 100 V voltage rating is not required and where the circuit topology accommodates single-diode operation rather than diode array configuration.

Both functional substitutes carry Last Time Buy product status, indicating limited future availability. Selection of these parts requires explicit circuit-level evaluation to confirm voltage margin adequacy and current capacity sufficiency for the intended application.

Frequently Asked Questions (FAQ)

Q: Can BAS16VV-7, BAS16VA-7, or BAS16VVQ-7 be used as direct replacements for BAS16VV,115?

A: Yes. BAS16VV-7, BAS16VA-7, and BAS16VVQ-7 are parametric equivalents with identical electrical specifications and package configurations. No circuit redesign is required. All three parts maintain the 100 V DC reverse voltage rating, 200 mA average rectified current per diode, 1.25 V forward voltage at 150 mA, and 4 ns reverse recovery time. The primary difference is product status: all three substitute parts carry Active status, ensuring continued availability, whereas the BAS16VV,115 is designated Not For New Designs.

Q: What is the difference between BAS16VV-7, BAS16VA-7, and BAS16VVQ-7?

A: All three parts are parametric equivalents with identical electrical specifications. BAS16VV-7 and BAS16VA-7 are standard industrial-grade parts. BAS16VVQ-7 is qualified to AEC-Q101 automotive standards and carries Automotive grade designation, making it suitable for automotive applications and high-reliability environments. BAS16VV-7 has the highest inventory availability (29,400 units), followed by BAS16VA-7 (6,605 units) and BAS16VVQ-7 (980 units).

Q: Can BAS16E6327HTSA1 or BAS16E6433HTMA1 replace BAS16VV,115?

A: These parts are functional substitutes only and require circuit-level evaluation. Both are single-diode packages, whereas BAS16VV,115 is a three-diode array. Both have reduced voltage ratings (80 V DC reverse versus 100 V) and increased current capacity (250 mA versus 200 mA). Substitution is only appropriate for applications where the circuit topology accommodates single-diode operation and where the 80 V voltage rating provides adequate margin for the intended application. Both parts carry Last Time Buy status, indicating limited future availability.

Q: What is the significance of the product status designations?

A: Product status indicates the manufacturing and availability lifecycle. "Not For New Designs" (BAS16VV,115) indicates the part is no longer recommended for new circuit development and may have limited future availability. "Active" status (BAS16VV-7, BAS16VA-7, BAS16VVQ-7) indicates the part is in full production with long-term availability commitment. "Last Time Buy" status (BAS16E6327HTSA1, BAS16E6433HTMA1) indicates the manufacturer will cease production after a specified date, with limited inventory remaining.

Q: Are all substitute parts RoHS3 compliant and REACH unaffected?

A: Yes. All substitute parts listed—BAS16VV-7, BAS16VA-7, BAS16VVQ-7, BAS16E6327HTSA1, and BAS16E6433HTMA1—are RoHS3 compliant and REACH unaffected, maintaining regulatory compliance with the original BAS16VV,115 part.

Q: What is the difference between SOT-563 and SOT-666 packages?

A: Both SOT-563 and SOT-666 are surface mount packages for the BAS16 diode array. The BAS16VV,115 and all parametric equivalents are available in both package options. Package selection depends on PCB layout requirements and manufacturing equipment compatibility. Electrical specifications remain identical across both package types.

Q: What is the operating temperature range difference between BAS16VV,115 and the parametric equivalents?

A: BAS16VV,115 specifies a maximum junction temperature of 150°C without a stated minimum. Parametric equivalents (BAS16VV-7, BAS16VA-7, BAS16VVQ-7) specify an operating temperature range of -55°C to 150°C, providing explicit low-temperature performance specification. This extended range specification provides superior performance documentation for applications requiring low-temperature operation.

Q: What packaging options are available for each substitute part?

A: BAS16VV-7, BAS16VA-7, and BAS16VVQ-7 are supplied in Tape & Reel (TR) packaging. BAS16E6327HTSA1 is supplied in Cut Tape (CT) packaging. BAS16E6433HTMA1 is supplied in Tape & Reel (TR) packaging. Packaging type affects handling, storage, and automated assembly compatibility but does not affect electrical performance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message