BAS16TW-TP Equivalent & Substitute Parts

Part Overview

The BAS16TW-TP is a diode array featuring three independent general-purpose rectifier diodes rated for 75 V DC reverse voltage and 150 mA average rectified current per diode. Manufactured by Micro Commercial Co, this surface mount component is housed in a 6-TSSOP (SOT-363) package and is currently in active production status with RoHS3 compliance. Substitute parts are identified to address inventory availability, extended lead times, or specific application requirements while maintaining electrical and mechanical compatibility within defined parameter tolerances.

Substiute Parts

BAS16TW-TP

Micro Commercial CoIn Stock: 756BAS16TW-TP Datasheet

Current PartRFQ

MMBD4148TW-TP

Micro Commercial CoIn Stock: 8316MMBD4148TW-TP Datasheet

Parametric EquivalentRFQ

BAS16TW-7-F

Diodes IncorporatedIn Stock: 155131BAS16TW-7-F Datasheet

SimilarRFQ

MMBD4148TW-7-F

Diodes IncorporatedIn Stock: 20218MMBD4148TW-7-F Datasheet

SimilarRFQ

MMBD4448HTW-7-F

Diodes IncorporatedIn Stock: 155429MMBD4448HTW-7-F Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the BAS16TW-TP are classified into two categories based on electrical parameter alignment:

Parametric Equivalents maintain identical electrical specifications across all critical parameters: 75 V reverse voltage, 150 mA average rectified current, 1.25 V forward voltage at 150 mA, 4 ns reverse recovery time, and 1 µA reverse leakage current at rated voltage. These parts are direct functional replacements with no performance trade-offs.

Similar Parts share the same package, mounting type, and diode configuration but differ in one or more electrical ratings. These parts are suitable for applications where the specified parameter differences do not conflict with circuit requirements. Substitution requires verification that the application can tolerate the parameter variance.

The following parameters determine substitution eligibility:

• Diode Configuration (must be 3 Independent)
• Package / Case (must be 6-TSSOP, SC-88, SOT-363)
• Mounting Type (must be Surface Mount)
• Voltage - DC Reverse (Vr) (Max) (must be ≥ 75 V)
• Current - Average Rectified (Io) (per Diode) (must be ≥ 150 mA)
• RoHS Status (must be ROHS3 Compliant)

Parameter Comparison

Engineering Selection Recommendations

MMBD4148TW-TP is the primary parametric equivalent for the BAS16TW-TP. All electrical specifications are identical with the exception of the operating temperature range, which is narrower (-55°C to 150°C versus -65°C to 150°C). This part is suitable for applications where the lower temperature limit of -55°C is acceptable. Both parts are manufactured by Micro Commercial Co and carry identical RoHS3 compliance and MSL ratings.

BAS16TW-7-F and MMBD4148TW-7-F are functionally equivalent to the BAS16TW-TP with identical electrical parameters and operating temperature ranges. These parts are manufactured by Diodes Incorporated and provide alternative sourcing from a different manufacturer while maintaining full electrical and mechanical compatibility.

MMBD4448HTW-7-F is a similar part with enhanced current rating (250 mA versus 150 mA) and slightly higher reverse voltage (80 V versus 75 V). The reverse leakage current is significantly lower (100 nA at 70 V versus 1 µA at 75 V). This part is suitable for applications requiring higher current capacity or lower leakage characteristics. The technology classification differs (Fast Recovery versus Standard), indicating faster switching behavior. All parts maintain RoHS3 compliance and identical package specifications.

Frequently Asked Questions (FAQ)

Q: Can MMBD4148TW-TP be used as a direct replacement for BAS16TW-TP?

A: Yes. MMBD4148TW-TP is a parametric equivalent with identical electrical specifications. The only difference is the operating temperature range, which is -55°C to 150°C compared to -65°C to 150°C for the BAS16TW-TP. Use this part only if your application does not require operation below -55°C.

Q: What is the difference between BAS16TW-7-F and BAS16TW-TP?

A: Both parts have identical electrical specifications and operating temperature ranges. The primary difference is the manufacturer: BAS16TW-TP is manufactured by Micro Commercial Co, while BAS16TW-7-F is manufactured by Diodes Incorporated. Both are RoHS3 compliant and use the same SOT-363 package.

Q: When should MMBD4448HTW-7-F be selected instead of BAS16TW-TP?

A: MMBD4448HTW-7-F should be selected when the application requires higher current capacity (250 mA per diode versus 150 mA) or lower reverse leakage current (100 nA versus 1 µA). The higher reverse voltage rating (80 V versus 75 V) provides additional margin in high-voltage applications. This part uses Fast Recovery technology, suitable for switching applications with faster recovery requirements.

Q: Are all substitute parts available in the same packaging format?

A: Yes. All listed substitute parts use the 6-TSSOP, SC-88, SOT-363 package in Tape & Reel (TR) format. They are all surface mount components with identical pin configurations and PCB footprints.

Q: Do all substitute parts meet RoHS3 compliance?

A: Yes. All substitute parts listed are RoHS3 compliant with MSL rating of 1 (Unlimited moisture sensitivity level). They are suitable for applications requiring environmental compliance certification.

Q: What is the significance of the reverse recovery time parameter?

A: Reverse recovery time (trr) of 4 ns indicates the speed at which the diode transitions from forward conduction to reverse blocking. All listed parts share this specification, ensuring consistent switching performance in rectification and signal conditioning circuits.