BAS16T-7-G Equivalent & Substitute Parts

Part Overview

The BAS16T-7-G is a general-purpose diode manufactured by Diodes Incorporated, packaged in SOT23-3 configuration. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing design requirements and procurement needs. The BAS16T-7-G maintains ROHS3 compliance and unlimited moisture sensitivity rating, making it suitable for standard industrial and commercial applications where general-purpose rectification is required.

Substiute Parts

BAS16T-7-G

Diodes IncorporatedIn Stock: 954BAS16T-7-G Datasheet

Current PartRFQ

BAS16T-7-F

Diodes IncorporatedIn Stock: 15445BAS16T-7-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BAS16T-7-G is determined by alignment with the following critical parameters:

Manufacturer Consistency: Both the main part and substitute parts originate from Diodes Incorporated, ensuring design continuity and supply chain reliability.

Base Product Series: All parts share the BAS16 base product number, confirming functional equivalence within the manufacturer's product line.

Compliance Requirements: Substitute parts maintain identical ROHS3 compliance, REACH unaffected status, and EAR99 ECCN classification, ensuring regulatory compatibility across procurement and deployment environments.

Moisture Sensitivity: MSL rating of 1 (Unlimited) is preserved across all parts, eliminating moisture-related handling and storage constraints.

Electrical Specifications: Substitute parts operate within the same voltage and current classifications as general-purpose small-signal diodes, supporting equivalent circuit functionality.

The BAS16T-7-F is identified as a direct substitute based on these parameters, with the primary distinction being packaging format and active product status.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: BAS16T-7-F

The BAS16T-7-F is the direct equivalent for the obsolete BAS16T-7-G. Selection of this substitute is supported by:

Product Status Alignment: The BAS16T-7-F maintains active product status with Diodes Incorporated, ensuring long-term availability and supply chain continuity.

Regulatory Compliance: Both parts maintain identical ROHS3 compliance, REACH unaffected designation, and EAR99 ECCN classification, eliminating compliance re-qualification requirements.

Manufacturer Consistency: Sourcing from the same manufacturer preserves design validation and quality assurance protocols established for the BAS16 product line.

Moisture Handling: Unlimited MSL rating (1) on the substitute part eliminates moisture-sensitive device handling procedures, reducing procurement and assembly complexity.

For applications requiring the BAS16T-7-G, transition to BAS16T-7-F is supported by equivalent electrical performance within the general-purpose small-signal diode classification and full regulatory compliance alignment.

Frequently Asked Questions (FAQ)

Q: What is the primary reason for substituting the BAS16T-7-G?

A: The BAS16T-7-G is classified as obsolete. The BAS16T-7-F is the active equivalent from Diodes Incorporated, ensuring continued availability and supply chain reliability.

Q: Are the BAS16T-7-G and BAS16T-7-F electrically equivalent?

A: Both parts share the BAS16 base product number and are classified as general-purpose small-signal diodes. The BAS16T-7-F provides specified electrical parameters (85 V reverse voltage, 75 mA average rectified current, 4 ns reverse recovery time) consistent with this classification.

Q: What is the packaging difference between these parts?

A: The BAS16T-7-G uses SOT23-3 packaging. The BAS16T-7-F uses SOT-523 packaging in Tape & Reel format. Both are surface-mount packages suitable for automated assembly.

Q: Do compliance requirements change with substitution?

A: No. Both parts maintain ROHS3 compliance, REACH unaffected status, and EAR99 ECCN classification. No regulatory re-qualification is required.

Q: Is moisture sensitivity a concern with the substitute part?

A: No. The BAS16T-7-F maintains MSL rating 1 (Unlimited), identical to the original part. Standard handling procedures apply without moisture-sensitive device precautions.

Q: Can the BAS16T-7-F be used as a direct pin-for-pin replacement?

A: Package compatibility must be evaluated. The BAS16T-7-F uses SOT-523 packaging while the original uses SOT23-3. PCB layout and footprint modifications may be required.

Q: What inventory status should be considered for procurement?

A: The BAS16T-7-F has 15,427 pieces in stock as new original inventory, providing immediate availability for production requirements.