BAS 16-02V E6327 Equivalent & Substitute Parts

Part Overview

The BAS 16-02V E6327 is a general-purpose surface mount rectifier diode manufactured by Infineon Technologies, rated for 80 V DC reverse voltage and 200 mA average rectified current. This component is classified as Obsolete, which necessitates identification of equivalent and substitute parts for ongoing design support and procurement continuity. The part is packaged in SC-79/SOD-523 surface mount configuration with small signal switching characteristics suitable for general rectification and signal detection applications.

Substiute Parts

BAS 16-02V E6327

Infineon TechnologiesIn Stock: 817BAS 16-02V E6327 Datasheet

Current PartRFQ

BAS1602VH6327XTSA1

Infineon TechnologiesIn Stock: 21891BAS1602VH6327XTSA1 Datasheet

Parametric EquivalentRFQ

BAS116LT1G

onsemiIn Stock: 17387BAS116LT1G Datasheet

MFR RecommendedRFQ

BAS516,115

Nexperia USA Inc.In Stock: 405199BAS516,115 Datasheet

MFR RecommendedRFQ

BAS516,135

Nexperia USA Inc.In Stock: 5904BAS516,135 Datasheet

MFR RecommendedRFQ

BAS516,315

Nexperia USA Inc.In Stock: 18582BAS516,315 Datasheet

MFR RecommendedRFQ

BAS716,115

Nexperia USA Inc.In Stock: 126903BAS716,115 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BAS 16-02V E6327 is determined by the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

• Voltage - DC Reverse (Vr) rating must equal or exceed 80 V
• Current - Average Rectified (Io) must equal or exceed 200 mA
• Voltage - Forward (Vf) at rated current must not exceed 1.25 V
• Mounting type must be Surface Mount
• Package must be SC-79 or SOD-523 compatible footprint
• Reverse Recovery Time (trr) must be compatible with application speed requirements
• Moisture Sensitivity Level must be MSL 1 or equivalent

Substitute Categories:

Category 1: Parametric Equivalents (Identical Electrical Specifications)

• BAS1602VH6327XTSA1 (Infineon Technologies) — Identical specifications, different product status and packaging format

Category 2: Manufacturer Recommended Alternatives (Voltage Reduction, Package Change)

• BAS116LT1G (onsemi) — 75 V rating (5 V reduction), 200 mA current, different package (SOT-23-3)
• BAS716,115 (Nexperia USA Inc.) — 75 V rating (5 V reduction), 200 mA current, SOD-523 package

Category 3: Manufacturer Recommended Alternatives (Voltage and Current Increase)

• BAS516,115 (Nexperia USA Inc.) — 100 V rating (20 V increase), 250 mA current (50 mA increase), SOD-523 package
• BAS516,135 (Nexperia USA Inc.) — 100 V rating (20 V increase), 250 mA current (50 mA increase), SOD-523 package
• BAS516,315 (Nexperia USA Inc.) — 100 V rating (20 V increase), 250 mA current (50 mA increase), SOD-523 package

Parameter Comparison

Engineering Selection Recommendations

First Priority: BAS1602VH6327XTSA1 This Infineon Technologies part maintains identical electrical specifications to the BAS 16-02V E6327 with 80 V reverse voltage and 200 mA current rating. Product status is Last Time Buy, indicating controlled availability. This part is the direct parametric equivalent and requires no circuit redesign. Inventory availability is 21,782 pieces.

Second Priority: BAS516,115 / BAS516,135 / BAS516,315 These Nexperia USA Inc. parts offer enhanced specifications with 100 V reverse voltage and 250 mA current capacity while maintaining identical forward voltage characteristics. All three variants are Active status with high inventory availability (5,870 to 405,100 pieces). These parts are suitable for applications where the BAS 16-02V E6327 operates below maximum ratings. All variants carry AEC-Q101 automotive qualification and ROHS3 compliance. Selection between the three variants depends on packaging format requirements (Cut Tape, Digi-Reel, or Tape & Reel).

Third Priority: BAS716,115 This Nexperia USA Inc. part operates at 75 V reverse voltage with 200 mA current, matching the original current specification. Active product status with 126,881 pieces in inventory. Carries AEC-Q100 automotive qualification and ROHS3 compliance. Suitable for applications where 80 V rating is not critical and 75 V operation is acceptable. Maintains SOD-523 package compatibility.

Fourth Priority: BAS116LT1G This onsemi part provides 75 V reverse voltage with 200 mA current in Active status. Requires package change from SC-79/SOD-523 to SOT-23-3 (TO-236-3), necessitating PCB layout modification. Inventory availability is 17,300 pieces. ROHS3 compliant. Suitable only when PCB redesign is acceptable.

All substitute parts are REACH Unaffected and carry ECCN EAR99 classification, matching the original part's regulatory status.

Frequently Asked Questions (FAQ)

Q: Can BAS1602VH6327XTSA1 be used as a direct replacement for BAS 16-02V E6327?

A: Yes. BAS1602VH6327XTSA1 is a parametric equivalent with identical electrical specifications (80 V, 200 mA, 1.25 V forward voltage, 4 ns recovery time) and identical package (SC-79/SOD-523). No circuit modification is required. The primary difference is product status (Last Time Buy versus Obsolete) and packaging format (Cut Tape versus unspecified).

Q: What is the difference between BAS516,115, BAS516,135, and BAS516,315?

A: These three parts are electrically identical (100 V, 250 mA, 1.25 V forward voltage, 4 ns recovery time, SOD-523 package). The differences are packaging format: BAS516,115 and BAS516,315 are supplied in Cut Tape (CT) & Digi-Reel® format, while BAS516,135 is supplied in Tape & Reel (TR) format. Selection depends on procurement and assembly equipment compatibility.

Q: Can I use a 75 V rated diode (BAS716,115 or BAS116LT1G) instead of the 80 V rated BAS 16-02V E6327?

A: Substitution with 75 V parts is permissible only if the application circuit operates with reverse voltage not exceeding 75 V. The 5 V reduction in rating provides reduced safety margin. BAS716,115 maintains the SOD-523 package, while BAS116LT1G requires package change to SOT-23-3.

Q: Why would I choose a 100 V rated part (BAS516 series) over the original 80 V specification?

A: The BAS516 series (100 V, 250 mA) provides enhanced voltage and current headroom for applications with variable or uncertain operating conditions. These parts are Active status with high inventory availability and automotive qualification (AEC-Q101). The identical forward voltage (1.25 V) and recovery time (4 ns) ensure circuit performance compatibility. Higher ratings do not degrade performance in circuits designed for lower specifications.

Q: What is the impact of reverse recovery time differences between parts?

A: The BAS 16-02V E6327 and BAS516 series specify 4 ns recovery time (fast recovery). The BAS716,115 and BAS116LT1G specify 3 µs recovery time (small signal). In high-frequency switching applications, the 4 ns parts are preferred. In low-frequency rectification applications, both specifications are acceptable. Application frequency requirements determine the appropriate selection.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed carry RoHS3 compliance status. The original BAS 16-02V E6327 does not specify RoHS status, but all active alternatives meet current RoHS3 requirements.

Q: What is the significance of AEC-Q101 and AEC-Q100 qualifications?

A: AEC-Q101 (BAS516 series) and AEC-Q100 (BAS716,115) are automotive qualification standards. These certifications indicate the parts have undergone automotive-grade reliability testing. Selection of qualified parts is required for automotive applications. Non-automotive applications do not require these qualifications.

Q: Can I mix different substitute parts in the same design?

A: Yes, provided all parts meet the circuit's electrical requirements. However, using identical part numbers throughout a design simplifies procurement, inventory management, and traceability. If multiple variants are necessary, document the substitution rationale and verify compatibility with assembly and test procedures.