BAS116L2-TP Equivalent & Substitute Parts

Part Overview

The BAS116L2-TP is a general-purpose rectifier diode manufactured by Micro Commercial Co, rated for 85 V DC reverse voltage and 215 mA average rectified current in a surface mount DFN1006-2C package. This component is classified as obsolete, which necessitates identification of active equivalent parts for ongoing design and procurement requirements. The BAS116L2-TP maintains full electrical and thermal compatibility with its active substitute, differing only in packaging configuration and product lifecycle status.

Substiute Parts

BAS116L2-TP

Micro Commercial CoIn Stock: 1012BAS116L2-TP Datasheet

Current PartRFQ

BAS116L2B-TP

Micro Commercial CoIn Stock: 90261BAS116L2B-TP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The BAS116L2-TP and BAS116L2B-TP are functionally equivalent rectifier diodes sharing the same base product number (BAS116) and identical electrical specifications. Substitution is valid based on the following matching parameters:

• Voltage - DC Reverse (Vr) (Max): 85 V
• Current - Average Rectified (Io): 215 mA
• Voltage - Forward (Vf) (Max) @ If: 1.25 V @ 150 mA
• Reverse Recovery Time (trr): 3 µs
• Current - Reverse Leakage @ Vr: 5 nA @ 75 V
• Capacitance @ Vr, F: 2 pF @ 0V, 1MHz
• Operating Temperature - Junction: -65°C to 150°C
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The primary distinction between these parts is the supplier device package designation (DFN1006-2C versus DFN1006-2L) and packaging format (tape & reel availability for the substitute).

Parameter Comparison

Engineering Selection Recommendations

The BAS116L2B-TP is the direct active substitute for the obsolete BAS116L2-TP. Selection of the BAS116L2B-TP is appropriate for new designs and procurement of replacement inventory due to its active product status and continuous availability. Both parts maintain identical electrical performance across all specified parameters, including voltage ratings, current capacity, forward voltage characteristics, and reverse recovery behavior.

The BAS116L2B-TP is available in tape & reel packaging format, which provides advantages for automated assembly operations compared to the original part's packaging configuration. Both parts satisfy ROHS3 compliance requirements and carry unlimited moisture sensitivity classification (MSL 1), eliminating special handling or storage constraints.

The substitute part shares the same base product number (BAS116) and manufacturer, ensuring design continuity and supply chain consistency. No circuit redesign or board layout modification is required for substitution.

Frequently Asked Questions (FAQ)

Q: Can BAS116L2B-TP be used as a direct replacement for BAS116L2-TP in existing designs?

A: Yes. The BAS116L2B-TP is electrically and thermally identical to the BAS116L2-TP across all specified parameters. No circuit modifications are required. The substitute part operates within the same voltage, current, and temperature ranges.

Q: What is the difference between the DFN1006-2C and DFN1006-2L package designations?

A: Both designations refer to equivalent 0402 (1006 Metric) surface mount packages. The primary difference is the supplier device package format and tape & reel availability for the BAS116L2B-TP variant.

Q: Why is the BAS116L2-TP listed as obsolete?

A: The BAS116L2-TP has been superseded by the BAS116L2B-TP in the manufacturer's product portfolio. The active substitute maintains full functional equivalence and is recommended for all new procurement and design applications.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts are ROHS3 compliant and carry identical moisture sensitivity classification (MSL 1). Both are subject to the same export control classification (EAR99) and tariff codes (HTSUS 8541.10.0070).

Q: What is the inventory status of these parts?

A: The BAS116L2-TP has 959 pieces in stock as new original inventory. The BAS116L2B-TP has 90,200 pieces in stock as new original inventory, providing significantly greater availability for procurement.

Q: Can these parts be used interchangeably in automated assembly processes?

A: Yes. Both parts are surface mount components with identical electrical specifications. The BAS116L2B-TP is available in tape & reel format, which is optimized for automated pick-and-place assembly operations.