BAP65-02,135 Equivalent & Substitute Parts

Part Overview

The BAP65-02,135 is an RF PIN diode manufactured by NXP USA Inc., designed for radio frequency applications requiring precise signal control. This single PIN diode operates at 30V peak reverse voltage with a maximum current rating of 100 mA and dissipates up to 715 mW. The component is packaged in SOD-523 (SC-79) form factor and is currently in active production status.

Substitute parts become necessary when the BAP65-02,135 experiences supply constraints, extended lead times, or when alternative packaging formats are required for manufacturing flexibility while maintaining electrical and mechanical compatibility.

Substiute Parts

BAP65-02,135

NXP USA Inc.In Stock: 60460BAP65-02,135 Datasheet

Current PartRFQ

BAP65-02,115

NXP SemiconductorsIn Stock: 2313BAP65-02,115 Datasheet

Parametric EquivalentRFQ

BAP51-02-TP

Micro Commercial CoIn Stock: 5995BAP51-02-TP Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the BAP65-02,135 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Diode Type: PIN - Single
• Voltage - Peak Reverse (Max): 30V minimum
• Current - Max: 100 mA minimum
• Power Dissipation (Max): 715 mW minimum
• Package / Case: SC-79, SOD-523
• Operating Temperature Range: -65°C ~ 150°C (TJ)

Acceptable Variations:

• Packaging format (Tape & Reel, Cut Tape, or Digi-Reel)
• Manufacturer identity
• Product status (Active or Obsolete)

Non-Substitutable Parameters:

• Diode configuration (must remain single PIN)
• Package form factor (must remain SOD-523)
• Thermal operating range (must encompass -65°C to 150°C)

Parameter Comparison

Engineering Selection Recommendations

BAP65-02,115 (Parametric Equivalent): This part is a direct parametric equivalent to the BAP65-02,135. Both components share identical electrical specifications across all critical parameters: 30V peak reverse voltage, 100 mA maximum current, 0.375pF capacitance, 350mOhm resistance, and 715 mW power dissipation. The only difference is packaging format (Cut Tape & Digi-Reel versus Tape & Reel). Both parts are Active status and ROHS3 compliant. Selection of BAP65-02,115 is appropriate when Cut Tape or Digi-Reel packaging is compatible with manufacturing processes.

BAP51-02-TP (MFR Recommended): This part exhibits deviations from the primary electrical specifications. The BAP51-02-TP operates at 60V peak reverse voltage (double the BAP65-02,135) and supports only 50 mA maximum current (half the BAP65-02,135). Resistance characteristics differ significantly at 2.5Ohm versus 350mOhm. The product status is Obsolete. This part should be selected only when circuit design specifically requires higher voltage rating and reduced current capacity, and when obsolete component sourcing is acceptable.

Frequently Asked Questions (FAQ)

Q: Can BAP65-02,115 be used as a direct replacement for BAP65-02,135?

A: Yes. BAP65-02,115 is a parametric equivalent with identical electrical specifications. The difference is packaging format only. Both are Active status, ROHS3 compliant, and operate within the same temperature range. Selection depends on manufacturing compatibility with Cut Tape & Digi-Reel packaging.

Q: Is BAP51-02-TP a suitable substitute for BAP65-02,135?

A: BAP51-02-TP is not a direct equivalent. It operates at 60V peak reverse voltage versus 30V, supports 50 mA maximum current versus 100 mA, and exhibits different resistance characteristics. Additionally, BAP51-02-TP is Obsolete status. This part is suitable only when circuit requirements specifically demand higher voltage rating and reduced current capacity.

Q: What packaging formats are available for these parts?

A: BAP65-02,135 is supplied in Tape & Reel (TR) format. BAP65-02,115 and BAP51-02-TP are available in Cut Tape (CT) and Digi-Reel® formats. All three parts use the same SOD-523 (SC-79) physical package.

Q: Are all three parts RoHS compliant?

A: Yes. BAP65-02,135, BAP65-02,115, and BAP51-02-TP are all ROHS3 compliant with MSL rating of 1 (Unlimited).

Q: What is the difference between Active and Obsolete product status?

A: Active status indicates the part is in current production with ongoing manufacturer support. Obsolete status indicates the part is no longer manufactured. BAP65-02,135 and BAP65-02,115 are Active. BAP51-02-TP is Obsolete and may have limited availability.