BAP64-06W,115 Equivalent & Substitute Parts

Part Overview

The BAP64-06W,115 is an RF Diode PIN in SC-70/SOT-323 package manufactured by NXP USA Inc. This component is a 1 Pair Common Anode PIN diode rated for 100V peak reverse voltage and 240 mW power dissipation. The part is currently obsolete, making equivalent substitutes necessary for new designs or production continuity. Substitute parts must maintain functional compatibility across RF switching and attenuation applications while meeting the same package and electrical performance requirements.

Substiute Parts

BAP64-06W,115

NXP USA Inc.In Stock: 794BAP64-06W,115 Datasheet

Current PartRFQ

BAR6306WH6327XTSA1

Infineon TechnologiesIn Stock: 823BAR6306WH6327XTSA1 Datasheet

MFR RecommendedRFQ

BAR6406WH6327XTSA1

Infineon TechnologiesIn Stock: 4132BAR6406WH6327XTSA1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the BAP64-06W,115 is determined by the following critical parameters:

• Package Compatibility: All substitutes must use SC-70/SOT-323 package to ensure PCB layout and assembly compatibility
• Diode Configuration: PIN diode with 1 Pair Common Anode topology must be maintained
• Maximum Current Rating: Minimum 100 mA to support the original application
• Power Dissipation: Substitute must equal or exceed 240 mW
• Voltage Rating: Peak reverse voltage must be sufficient for the application circuit
• Electrical Characteristics: Capacitance and resistance values must fall within acceptable ranges for RF switching performance
• Compliance: RoHS3 compliance and MSL 1 rating required

Two substitute parts are identified based on these criteria, each offering different voltage ratings while maintaining core electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

BAR6306WH6327XTSA1 (50V Rating): This substitute is suitable for applications where the circuit peak reverse voltage does not exceed 50V. It offers lower voltage headroom than the original BAP64-06W,115 and should be selected only when the application design margin permits. Both parts are RoHS3 compliant with MSL 1 rating and active product status ensures long-term availability.

BAR6406WH6327XTSA1 (150V Rating): This substitute provides 150V peak reverse voltage capability, exceeding the original 100V specification. It maintains identical capacitance and resistance characteristics to the BAP64-06W,115 at the same measurement conditions, making it the preferred direct replacement for applications requiring equivalent or higher voltage performance. Active product status and full compliance certifications support production continuity.

Both substitutes meet or exceed the 240 mW power dissipation requirement with 250 mW ratings and maintain the SC-70/SOT-323 package footprint for direct PCB compatibility.

Frequently Asked Questions (FAQ)

Q: Can BAR6306WH6327XTSA1 be used as a direct replacement for BAP64-06W,115?

A: BAR6306WH6327XTSA1 is electrically compatible only in applications where the circuit peak reverse voltage does not exceed 50V. The original BAP64-06W,115 is rated for 100V, so this substitute introduces voltage derating. Verify circuit requirements before selection.

Q: Is BAR6406WH6327XTSA1 a direct replacement?

A: Yes. BAR6406WH6327XTSA1 matches the 100V peak reverse voltage rating and maintains identical capacitance (0.35pF @ 20V, 1MHz) and resistance (1.35Ohm @ 100mA, 100MHz) characteristics. The SC-70/SOT-323 package is identical, supporting direct PCB substitution.

Q: Are there temperature range differences?

A: The original BAP64-06W,115 specifies -65°C to 150°C operating range. Both Infineon substitutes specify 150°C maximum. Verify lower temperature performance requirements for your application, as the substitutes may have different minimum operating temperatures.

Q: Do all parts meet compliance requirements?

A: All three parts are RoHS3 compliant, REACH unaffected, and carry MSL 1 (Unlimited) moisture sensitivity rating. Compliance certifications are equivalent across all options.

Q: What is the inventory status?

A: BAP64-06W,115 is obsolete with 711 pcs in stock. BAR6306WH6327XTSA1 has 804 pcs available. BAR6406WH6327XTSA1 has 4100 pcs available, providing the highest supply continuity.