BA 892 L6327 Equivalent & Substitute Parts

Part Overview

The BA 892 L6327 is an RF Diode Standard - Single manufactured by Infineon Technologies, rated for 35V peak reverse voltage and 100 mA maximum current in an SC-80 package. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production requirements. The part operates at a maximum junction temperature of 150°C and exhibits 1.1 pF capacitance at 3V, 1MHz and 500 mOhm resistance at 10 mA, 100 MHz.

Substiute Parts

BA 892 L6327

Infineon TechnologiesIn Stock: 1020BA 892 L6327 Datasheet

Current PartRFQ

MADP-007455-12790T

MACOM Technology SolutionsIn Stock: 2218MADP-007455-12790T Datasheet

MFR RecommendedRFQ

MADP-008120-12790T

MACOM Technology SolutionsIn Stock: 19157MADP-008120-12790T Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the BA 892 L6327 is based on the following electrical and mechanical criteria:

Allowed Substitution Parameters:

• Voltage - Peak Reverse (Max): Equal to or greater than 35V
• Current - Max: Equal to or greater than 100 mA
• Package / Case: SC-79 or SC-80 compatible footprints
• Operating Temperature: Equal to or greater than 150°C
• Diode Type: PIN or Standard configuration acceptable for RF applications
• Moisture Sensitivity Level: MSL 1 or equivalent

The substitute parts MADP-007455-12790T and MADP-008120-12790T, both manufactured by MACOM Technology Solutions, meet these criteria with enhanced electrical performance characteristics and active product status.

Parameter Comparison

Engineering Selection Recommendations

Both MADP-007455-12790T and MADP-008120-12790T are suitable substitutes for the obsolete BA 892 L6327. Selection between these two MACOM alternatives depends on application-specific RF performance requirements:

MADP-007455-12790T provides 0.35 pF capacitance at 50V, 1 MHz and 3 Ohm resistance at 10 mA, 100 MHz, suitable for standard RF switching applications.

MADP-008120-12790T provides 0.15 pF capacitance at 10V, 1.8 GHz and 2.5 Ohm resistance at 10 mA, 1.8 GHz, optimized for higher frequency RF applications.

Both parts are RoHS3 compliant and carry active product status with substantial inventory availability. The SC-79 package used by both substitutes is mechanically compatible with SC-80 footprints in most RF circuit designs. Operating temperature ratings of 175°C exceed the original 150°C specification, providing thermal margin.

Frequently Asked Questions (FAQ)

Q: Can MADP-007455-12790T or MADP-008120-12790T be used as direct replacements for BA 892 L6327?

A: Both parts meet the minimum electrical requirements (voltage, current, temperature) and package compatibility criteria. The SC-79 package is mechanically compatible with SC-80 footprints. Verification of RF performance characteristics at your specific operating frequency is necessary to confirm suitability for your application.

Q: What is the primary difference between the two MACOM substitute parts?

A: MADP-007455-12790T is optimized for 100 MHz operation with 3 Ohm resistance, while MADP-008120-12790T is optimized for 1.8 GHz operation with 2.5 Ohm resistance and lower capacitance. Select based on your circuit's operating frequency.

Q: Are the substitute parts RoHS compliant?

A: Yes, both MADP-007455-12790T and MADP-008120-12790T are RoHS3 compliant. The original BA 892 L6327 is REACH unaffected.

Q: What is the inventory status of these substitute parts?

A: MADP-007455-12790T has 2,188 pieces in stock. MADP-008120-12790T has 19,053 pieces in stock. Both are classified as new original components.

Q: Do the substitute parts require any circuit modifications?

A: The SC-79 package dimensions differ slightly from SC-80. PCB layout verification is required to confirm footprint compatibility. Electrical parameter differences (lower capacitance, lower resistance) may require circuit tuning in RF applications.