BA 892 E6327 Equivalent & Substitute Parts

Part Overview

The BA 892 E6327 is an RF Diode Standard - Single manufactured by Infineon Technologies, rated for 35V peak reverse voltage and 100 mA maximum current in an SC-80 package. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production requirements. The part operates at a maximum junction temperature of 150°C and exhibits 1.1 pF capacitance at 3V, 1MHz and 500 mOhm resistance at 10 mA, 100 MHz.

Substiute Parts

BA 892 E6327

Infineon TechnologiesIn Stock: 1138BA 892 E6327 Datasheet

Current PartRFQ

MADP-007455-12790T

MACOM Technology SolutionsIn Stock: 2218MADP-007455-12790T Datasheet

MFR RecommendedRFQ

MADP-008120-12790T

MACOM Technology SolutionsIn Stock: 19157MADP-008120-12790T Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the BA 892 E6327 is based on the following electrical and mechanical criteria:

Allowed Substitution Parameters:

• Diode Type: PIN - Single (higher performance variant acceptable for Standard - Single applications)
• Voltage - Peak Reverse (Max): Equal to or greater than 35V (100V rated substitutes provide margin)
• Current - Max: Equal to or greater than 100 mA (150 mA rated substitutes provide margin)
• Capacitance: Lower values acceptable (improved RF performance)
• Resistance: Lower values acceptable (improved RF performance)
• Operating Temperature: Equal to or greater than 150°C (175°C rated substitutes provide margin)
• Package / Case: SC-79 acceptable as mechanical equivalent to SC-80
• Moisture Sensitivity Level: Equal to or lower MSL rating (MSL 1 maintained)

The substitute parts MADP-007455-12790T and MADP-008120-12790T are both PIN diodes manufactured by MACOM Technology Solutions with active product status, providing superior electrical characteristics and higher current/voltage ratings than the obsolete BA 892 E6327.

Parameter Comparison

Engineering Selection Recommendations

Both MADP-007455-12790T and MADP-008120-12790T are valid substitutes for the obsolete BA 892 E6327. Selection between them depends on application-specific RF performance requirements:

MADP-007455-12790T provides 0.35 pF capacitance at 50V, 1 MHz, suitable for applications requiring moderate RF performance with standard frequency operation.

MADP-008120-12790T provides 0.15 pF capacitance at 10V, 1.8 GHz, optimized for higher frequency RF applications up to 1.8 GHz with superior capacitance characteristics.

Both substitutes exceed the original part's voltage and current ratings, operate at higher junction temperatures (175°C vs. 150°C), and maintain MSL 1 moisture sensitivity classification. MADP-007455-12790T carries ROHS3 compliance certification. Both parts are available in active production status with substantial inventory levels, ensuring supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can MADP-007455-12790T or MADP-008120-12790T be used as direct replacements for BA 892 E6327?

A: Yes. Both parts meet or exceed all critical electrical parameters (voltage, current, temperature) and maintain compatible MSL ratings. Package differences (SC-79 vs. SC-80) require PCB layout verification for mechanical fit.

Q: What is the difference between MADP-007455-12790T and MADP-008120-12790T?

A: Both are PIN diodes with identical voltage and current ratings. MADP-008120-12790T exhibits lower capacitance (0.15 pF vs. 0.35 pF) and is characterized at higher frequency (1.8 GHz vs. 1 MHz), making it suitable for higher frequency RF applications.

Q: Why does the BA 892 E6327 show lower resistance values than the substitutes?

A: The original part's 500 mOhm resistance is measured at 100 MHz, while substitute parts show higher absolute resistance values. MADP-008120-12790T's 2.5 Ohm resistance is measured at 1.8 GHz, reflecting frequency-dependent behavior in PIN diode structures.

Q: Are there packaging considerations when substituting these parts?

A: Yes. The BA 892 E6327 uses SC-80 package, while both substitutes use SC-79 or SOD-523 packages. PCB footprint and land pattern must be verified for mechanical compatibility before implementation.

Q: What is the inventory status of these substitute parts?

A: MADP-007455-12790T has 2,188 pieces in stock. MADP-008120-12790T has 19,053 pieces in stock. Both are manufactured by MACOM Technology Solutions with active product status.