BA885E6327HTSA1 Equivalent & Substitute Parts

Part Overview

The BA885E6327HTSA1 is an RF Diode PIN - Single rated for 50V peak reverse voltage with a maximum current of 50 mA, housed in a SOT-23-3 package. This component is classified as Obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement continuity. The part operates at a maximum junction temperature of 150°C and exhibits capacitance of 0.6pF at 10V, 1MHz with resistance of 7Ohm at 10mA, 100MHz.

Substiute Parts

BA885E6327HTSA1

Infineon TechnologiesIn Stock: 1153BA885E6327HTSA1 Datasheet

Current PartRFQ

SMP1340-007LF

Skyworks Solutions Inc.In Stock: 5342SMP1340-007LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the BA885E6327HTSA1 is determined by strict equivalence across the following electrical and mechanical parameters:

• Diode Type: PIN - Single configuration required
• Voltage Rating: 50V peak reverse voltage minimum
• Package: SOT-23-3 (TO-236-3, SC-59) physical compatibility
• Capacitance & Resistance: Operating characteristics at specified frequency and bias conditions
• Temperature Range: Operating temperature capability of 150°C or higher

The SMP1340-007LF meets these substitution criteria as an Active product with identical voltage rating, package form factor, and diode topology. The substitute demonstrates improved electrical performance characteristics while maintaining mechanical and thermal compatibility.

Parameter Comparison

Engineering Selection Recommendations

The SMP1340-007LF is the designated manufacturer-recommended substitute for the BA885E6327HTSA1. Selection is based on the following factors:

• Product Status: The BA885E6327HTSA1 is Obsolete; the SMP1340-007LF is Active and currently manufactured by Skyworks Solutions Inc.
• Electrical Equivalence: Both devices maintain 50V peak reverse voltage rating and SOT-23-3 package compatibility, satisfying core RF diode PIN application requirements.
• Compliance: The SMP1340-007LF carries ROHS3 Compliant and REACH Unaffected certifications, meeting current regulatory standards.
• Performance Enhancement: The substitute demonstrates improved electrical characteristics with lower capacitance (0.3pF vs 0.6pF) and lower resistance (1.2Ohm vs 7Ohm), providing superior RF performance in equivalent applications.
• Thermal & Moisture: Both parts maintain MSL 1 (Unlimited) rating and support 150°C maximum operating temperature, ensuring thermal and environmental compatibility.

Frequently Asked Questions (FAQ)

Q: Can the SMP1340-007LF directly replace the BA885E6327HTSA1 in existing designs?

A: Yes. Both devices share identical voltage rating (50V), diode type (PIN - Single), and package form factor (SOT-23-3). The substitute exhibits improved electrical performance characteristics and is actively manufactured.

Q: What are the key differences between these two parts?

A: The SMP1340-007LF demonstrates lower capacitance and resistance values at specified bias conditions, higher power dissipation rating (250 mW), and extended operating temperature range (-65°C to 150°C vs 150°C maximum). The substitute is ROHS3 Compliant and currently in Active production status.

Q: Are there any package compatibility concerns?

A: No. Both parts use the SOT-23-3 package designation (TO-236-3, SC-59). Physical footprint and pin configuration are identical, requiring no PCB layout modifications.

Q: What is the moisture sensitivity level for both parts?

A: Both the BA885E6327HTSA1 and SMP1340-007LF carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage or handling.

Q: Does the SMP1340-007LF meet current regulatory requirements?

A: Yes. The substitute is ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory standards applicable to electronic components.