Equivalent & Substitute Parts: BA4560N-BZ

Part Overview

The Rohm Semiconductor BA4560N-BZ is a general purpose dual operational amplifier categorized under Linear, Amplifiers. It features a 2-circuit configuration in an 8-SIP through-hole package, with a gain bandwidth product of 10 MHz and a typical slew rate of 4V/µs. Given its status as Obsolete, design engineers must identify suitable substitute parts for ongoing designs, repairs, or maintenance that require equivalent electrical and mechanical performance.

Substiute Parts

BA4560N-BZ

Rohm SemiconductorIn Stock: 965BA4560N-BZ Datasheet

Current PartRFQ

BA4560F-E2

Rohm SemiconductorIn Stock: 156546BA4560F-E2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for BA4560N-BZ is determined by matching the following key electrical and mechanical parameters: amplifier type, number of circuits, slew rate, gain bandwidth product, input bias current, input offset voltage, maximum output current per channel, supply voltage range, operating temperature range, mounting type, and package/case specification. Only substitute parts that satisfy all these critical parameters while remaining within the same component category—Linear, Amplifiers—are considered.

Parameter Comparison

Engineering Selection Recommendations

BA4560N-BZ is designated as Obsolete. Substitute part BA4560F-E2 is Active and ROHS3 Compliant, matching all core electrical parameters and compliance requirements. Selection between parts should be based on availability, product status, and mounting technology compatibility as provided in the datasheet and inventory information.

Frequently Asked Questions (FAQ)

Q1: What criteria are used to accept BA4560F-E2 as a valid substitute for BA4560N-BZ?
A1: Criteria include identical amplifier type, number of circuits, slew rate, gain bandwidth product, input bias current, input offset voltage, output current per channel, supply voltage range, operating temperature, and RoHS compliance.

Q2: Are there any differences in the package or mounting type between BA4560N-BZ and BA4560F-E2?
A2: Yes. BA4560N-BZ uses a through-hole 8-SIP package, while BA4560F-E2 is offered in a surface mount 8-SOIC (4.40mm width) package.

Q3: Does the electrical performance differ between the two parts for the parameters described?
A3: No. All listed electrical parameters are equivalent between BA4560N-BZ and BA4560F-E2.

Q4: What should be considered regarding compliance and inventory?
A4: Both parts are ROHS3 Compliant. BA4560N-BZ is obsolete, while BA4560F-E2 is active with significant inventory available.

Q5: Can BA4560F-E2 be used in place of BA4560N-BZ in existing PCBs without modification?
A5: BA4560F-E2 requires a surface mount footprint (8-SOIC), which differs from the through-hole 8-SIP footprint of BA4560N-BZ. Compatibility must be assessed based on the PCB mounting technology and layout.