BA4560FVT-GE2 Equivalent & Substitute Parts Reference

Part Overview

BA4560FVT-GE2 from Rohm Semiconductor is a general-purpose, dual operational amplifier in an 8-TSSOP-B surface-mount package. It is categorized under linear amplifiers and is ROHS3 compliant. This IC is suitable for various analog signal applications due to features such as a 4V/µs slew rate and 10 MHz gain bandwidth product. The part is active and available in cut tape and Digi-Reel® packaging.
Alternative models are sometimes necessary to maintain supply, address inventory shortages, or ensure continuity if a part's product status changes or specific stock requirements must be met.

Key Parameters

Parameter	BA4560FVT-GE2 Value
Amplifier Type	General Purpose
Number of Circuits	2
Slew Rate	4V/µs
Gain Bandwidth Product	10 MHz
Current - Input Bias	50 nA
Voltage - Input Offset	500 µV
Current - Supply	4 mA
Current - Output / Channel	25 mA
Voltage - Supply Span (Min)	8 V
Voltage - Supply Span (Max)	30 V
Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173", 4.40mm Width)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected
Product Status	Active

Substitute Part Grouping Explanation

Substitute and equivalent parts for BA4560FVT-GE2 are determined strictly based on matching or exceeding the following specified parameters in the product category of linear amplifiers:

Functional amplifier type and number of circuits (general or audio, dual op-amp)
Slew rate and gain bandwidth product
Input bias current and offset voltage
Supply current and current output per channel
Supply voltage range (minimum and maximum)
Operating temperature range
Surface mount compatibility; package/case matches 8-TSSOP dimensions
Compliance parameters: RoHS, REACH, MSL

Parts grouped as substitutes meet all provided criteria in these areas, ensuring electrical, thermal, and mechanical compatibility within the listed parameter boundaries.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Amplifier Type	Number of Circuits	Slew Rate	Gain Bandwidth Product	Current - Input Bias	Voltage - Input Offset	Current - Supply	Current - Output / Channel	Voltage - Supply Span (Min)	Voltage - Supply Span (Max)	Operating Temperature	Mounting Type	Package / Case	RoHS Status	Moisture Sensitivity Level (MSL)	REACH Status	Product Status
BA4560FVT-GE2	Rohm Semiconductor	General Purpose	2	4V/µs	10 MHz	50 nA	500 µV	4 mA	25 mA	8 V	30 V	-40°C ~ 85°C	Surface Mount	8-TSSOP (0.173", 4.40mm Width)	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	Active
RC4560IPW	Texas Instruments	Audio	2	5.5V/µs	15 MHz	40 nA	500 µV	4.3mA	50 mA	4 V	32 V	-40°C ~ 85°C	Surface Mount	8-TSSOP (0.173", 4.40mm Width)	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	Last Time Buy
RC4560IPWR	Texas Instruments	Audio	2	5.5V/µs	15 MHz	40 nA	500 µV	4.3mA	50 mA	4 V	32 V	-40°C ~ 85°C	Surface Mount	8-TSSOP (0.173", 4.40mm Width)	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	Active
LM258PT	STMicroelectronics	General Purpose	2	0.6V/µs	1.1 MHz	20 nA	5 mV	700µA (x2 Channels)	40 mA	3 V	30 V	-40°C ~ 105°C	Surface Mount	8-TSSOP (0.173", 4.40mm Width)	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	Active
LM2904PT	Rohm Semiconductor	General Purpose	2	0.3V/µs	800 kHz	20 nA	1 mV	600µA	30 mA	3 V	32 V	-40°C ~ 125°C	Surface Mount	8-TSSOP (0.173", 4.40mm Width)	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	Active
LM2904AYPT	STMicroelectronics	General Purpose	2	0.6V/µs	1.1 MHz	20 nA	1 mV	700µA	40 mA	3 V	30 V	-40°C ~ 125°C	Surface Mount	8-TSSOP (0.173", 4.40mm Width)	ROHS3 Compliant	1 (Unlimited)	REACH Unaffected	Active

Engineering Selection Recommendations

Only parts with an active product status or suitable compliance are considered for strict substitution of BA4560FVT-GE2. All listed substitute parts are ROHS3 compliant, meet MSL 1, and are REACH unaffected. Substitutes with “Last Time Buy” status, such as RC4560IPW, should only be used when long-term supply is not a concern.
All considered components match or exceed the basic packaging and mounting requirements (surface mount, 8-TSSOP case).
Parts labeled “Obsolete” in the source data have been excluded from primary recommendations.

Frequently Asked Questions (FAQ)

Q1: Which parameters were used to determine substitution for BA4560FVT-GE2?
A1: Substitution is based strictly on amplifier type, number of circuits, slew rate, gain bandwidth product, input bias current, input offset voltage, supply and output current, supply voltage range, operating temperature, mounting type, package/case, and compliance certifications.

Q2: What is the importance of compliance when selecting a substitute?
A2: ROHS3 compliance, REACH status, and MSL rating ensure substitutes meet environmental, safety, and handling requirements for modern electronics assembly.

Q3: Does package compatibility matter for these substitutes?
A3: Yes. All substitute parts use the same 8-TSSOP (0.173", 4.40mm Width) surface-mount package, ensuring direct mechanical interchangeability on existing PCBs.

Q4: How does product status affect substitute selection?
A4: Only parts with status as “Active” or “Last Time Buy” are included for practical substitution, ensuring continued or available supply.

Q5: Are there any differences in performance among substitutes?
A5: Yes. Parameters such as slew rate, gain bandwidth, and supply current vary among substitutes. Only values explicitly stated in the input are used for comparison; other performance aspects are not considered in this equivalency.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message