Request Quote
(Ships tomorrow)
BA3404F-E2 Equivalent & Substitute Parts Reference
Part Overview
The Rohm Semiconductor BA3404F-E2 is a general-purpose dual operational amplifier (op amp) in the Linear, Amplifiers category, supplied in an 8-SOP surface mount package. The product is currently active, RoHS3 compliant, and REACH unaffected. Its design includes key parameters such as 2 circuits, push-pull output, 1.2V/µs slew rate, and a wide supply voltage span (4 V to 36 V). Identifying compatible substitute operational amplifier models is essential for applications requiring cross-reference due to supply chain needs, alternate sourcing, or lifecycle management.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | BA3404F-E2 |
| Manufacturer | Rohm Semiconductor |
| Category | Linear, Amplifiers |
| Amplifier Type | General Purpose |
| Number of Circuits | 2 |
| Output Type | Push-Pull |
| Slew Rate | 1.2V/µs |
| Gain Bandwidth Product | 1.2 MHz |
| Current - Input Bias | 70 nA |
| Voltage - Input Offset | 2 mV |
| Current - Supply | 2mA |
| Current - Output / Channel | 30 mA |
| Voltage - Supply Span (Min) | 4 V |
| Voltage - Supply Span (Max) | 36 V |
| Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.173", 4.40mm Width) |
| Supplier Device Package | 8-SOP |
| RoHS Status | ROHS3 Compliant |
| REACH Status | REACH Unaffected |
| Product Status | Active |
Substitute Part Grouping Explanation
Substitute and equivalent parts for BA3404F-E2 are identified based on strict matching of core operational amplifier parameters. Selection is limited to Linear, Amplifiers category components that meet the following allowed criteria:
- Amplifier Type (General Purpose)
- Number of Circuits (2)
- Comparable slew rate, gain bandwidth, input parameters, supply currents, and output drive
- Supply voltage range
- Operating temperature
- Package and mounting type
- RoHS and REACH compliance
Only models explicitly listed or referenced by the manufacturer or suppliers are included, as per product group and cross-listing.
Parameter Comparison
| Part Number | Manufacturer | Amplifier Type | Number of Circuits | Slew Rate | Gain Bandwidth Product | Current - Input Bias | Voltage - Input Offset | Current - Supply | Current - Output / Channel | Voltage - Supply Span (Min) | Voltage - Supply Span (Max) | Operating Temp | Mounting Type | Package / Case | RoHS Status | REACH Status | Product Status |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BA3404F-E2 | Rohm Semiconductor | General Purpose | 2 | 1.2V/µs | 1.2 MHz | 70 nA | 2 mV | 2mA | 30 mA | 4 V | 36 V | -40°C ~ 85°C | Surface Mount | 8-SOIC (0.173", 4.40mm) | ROHS3 | REACH Unaffected | Active |
| LM1458M/NOPB | Texas Instruments | General Purpose | 2 | 0.5V/µs | 1 MHz | 200 nA | 1 mV | 3mA (x2) | - | 36 V | 36 V | 0°C ~ 70°C | Surface Mount | 8-SOIC (0.154", 3.90mm) | ROHS3 | REACH Unaffected | Active |
| LM258YDT | STMicroelectronics | General Purpose | 2 | 0.6V/µs | 1.1 MHz | 20 nA | 5 mV | 700µA (x2) | 40 mA | 3 V | 30 V | -40°C ~ 105°C | Surface Mount | 8-SOIC (0.154", 3.90mm) | ROHS3 | REACH Unaffected | Obsolete |
| LM358ADT | STMicroelectronics | General Purpose | 2 | 0.6V/µs | 1.1 MHz | 20 nA | 1 mV | 700µA (x2) | 40 mA | 3 V | 30 V | 0°C ~ 70°C | Surface Mount | 8-SOIC (0.154", 3.90mm) | ROHS3 | REACH Unaffected | Active |
| LM358S-13 | Diodes Incorporated | General Purpose | 2 | - | 700 kHz | 45 nA | 2 mV | 1mA | 40 mA | 3 V | 32 V | 0°C ~ 70°C | Surface Mount | 8-SOIC (0.154", 3.90mm) | ROHS3 | REACH Unaffected | Active |
| LM358YDT | STMicroelectronics | General Purpose | 2 | 0.6V/µs | 1.1 MHz | 20 nA | 2 mV | 700µA (x2) | 40 mA | 3 V | 30 V | 0°C ~ 70°C | Surface Mount | 8-SOIC (0.154", 3.90mm) | ROHS3 | REACH Unaffected | Active |
| LM7372MR/NOPB | Texas Instruments | Voltage Feedback | 2 | 3000V/µs | 120 MHz | 2.7 µA | 2 mV | 13mA (x2) | 260 mA | 9 V | 36 V | -40°C ~ 85°C | Surface Mount | 8-PowerSOIC (0.154", 3.90mm) | ROHS3 | REACH Unaffected | Active |
| LM7372MRX/NOPB | Texas Instruments | Voltage Feedback | 2 | 3000V/µs | 120 MHz | 2.7 µA | 2 mV | 13mA (x2) | 260 mA | 9 V | 36 V | -40°C ~ 85°C | Surface Mount | 8-PowerSOIC (0.154", 3.90mm) | ROHS3 | REACH Unaffected | Active |
| MC1458PSR | Texas Instruments | General Purpose | 2 | 0.5V/µs | 1 MHz | 80 nA | 1 mV | 3.4mA (x2) | 25 mA | 10 V | 30 V | 0°C ~ 70°C (TA) | Surface Mount | 8-SOIC (0.209", 5.30mm) | ROHS3 | REACH Unaffected | Last Time Buy |
| TL062ACPSR | Texas Instruments | J-FET | 2 | 3.5V/µs | 1 MHz | 30 pA | 3 mV | 200µA (x2) | 20 mA | 10 V | 30 V | 0°C ~ 70°C | Surface Mount | 8-SOIC (0.209", 5.30mm) | ROHS3 | REACH Unaffected | Last Time Buy |
| TL3472CD | Texas Instruments | General Purpose | 2 | 13V/µs | 4 MHz | 100 nA | 1 mV | 3.5mA (x2) | 34 mA | 4 V | 36 V | 0°C ~ 70°C (TA) | Surface Mount | 8-SOIC (0.154", 3.90mm) | ROHS3 | REACH Unaffected | Obsolete |
Engineering Selection Recommendations
Selection should prioritize substitute operational amplifiers that match RoHS3 compliance, REACH unaffected status, similar surface mount 8-SOIC or 8-SOP packaging, and active product status. Substitute parts with the same or wider operating temperature ranges, supply voltage ranges, and circuit count are suitable within constraints defined in the parameter comparison. Only use components with required certifications and compliance for regulated applications.
Frequently Asked Questions (FAQ)
Q1: What criteria determine if an operational amplifier is an acceptable substitute for BA3404F-E2?
A1: Substitution is strictly based on matching in the following parameters: amplifier type, number of circuits, package, mounting method, slew rate, gain bandwidth, supply current, output current, input bias and offset, supply voltage range, operating temperature, and compliance (RoHS, REACH).
Q2: How do package differences affect substitution?
A2: Substitute parts must be available in compatible surface mount packages such as 8-SOIC or 8-SOP to ensure drop-in board-level compatibility.
Q3: Can substitutes from the provided list be used in automotive or industrial environments?
A3: Some substitutes specify automotive grade and AEC-Q100 qualification. Verify that each substitute meets end-use environment requirements explicitly stated in provided parameters.
Q4: Are all listed substitutes currently available?
A4: Availability is specified by the “Product Status” parameter in the table. Only "Active" status components are in current production; "Last Time Buy" and "Obsolete" are subject to end-of-life constraints.
Q5: Is RoHS or REACH compliance mandatory when selecting a substitute?
A5: Substitution must follow RoHS3 compliance and REACH unaffected status as stated, to ensure regulatory compliance in all target applications.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts










